267
Views
1
CrossRef citations to date
0
Altmetric
Research Articles

Strategic network design for recycling of EPS insulation material – insights from a German case study

&
Pages 5878-5904 | Received 13 Jun 2023, Accepted 24 Dec 2023, Published online: 19 Jan 2024

References

  • Achilias, Dimitris S., Iliana Kanellopoulou, Panagiotis Megalokonomos, Eleni Antonakou, and Angelos A. Lappas. 2007. “Chemical Recycling of Polystyrene by Pyrolysis: Potential Use of the Liquid Product for the Reproduction of Polymer.” Macromolecular Materials and Engineering 292 (8): 923–934. https://doi.org/10.1002/mame.200700058.
  • Agrawal, Saurabh, Rajesh K. Singh, and Qasim Murtaza. 2015. “A Literature Review and Perspectives in Reverse Logistics.” Resources, Conservation and Recycling 97: 76–92. https://doi.org/10.1016/j.resconrec.2015.02.009.
  • Akçalı, Elif, Sila Çetinkaya, and Halit Üster. 2009. “Network Design for Reverse and Closed-Loop Supply Chains: An Annotated Bibliography of Models and Solution Approaches.” Networks 53 (3): 231–248. https://doi.org/10.1002/net.20267.
  • Albrecht, Wolfgang, and Christoph Schwitalla. 2015. “Rückbau, Recycling und Verwertung von WDVS: Möglichkeiten der Wiederverwertung von Bestandteilen des WDVS nach dessen Rückbau durch Zuführung in den Produktionskreislauf der Dämmstoffe bzw. Downcycling in die Produktion minderwertiger Güter bis hin zur energetischen Verwertung.” Stuttgart. http://www.irbnet.de/daten/rswb/15029008835.pdf.
  • Alumur, Sibel A., Stefan Nickel, Francisco Saldanha-da Gama, and Vedat Verter. 2012. “Multi-Period Reverse Logistics Network Design.” European Journal of Operational Research 220 (1): 67–78. https://doi.org/10.1016/j.ejor.2011.12.045.
  • Aras, Necati, Aybek Korugan, Gülçin Büyüközkan, Funda S. Şerifoğlu, İsmail Erol, and Meltem N. Velioğlu. 2015. “Locating Recycling Facilities for IT-Based Electronic Waste in Turkey.” Journal of Cleaner Production 105: 324–336. https://doi.org/10.1016/j.jclepro.2015.02.046.
  • Ayvaz, Berk, Bersam Bolat, and Nezir Aydın. 2015. “Stochastic Reverse Logistics Network Design for Waste of Electrical and Electronic Equipment.” Resources, Conservation and Recycling 104: 391–404. https://doi.org/10.1016/j.resconrec.2015.07.006.
  • Barros, Ana I., Rommert Dekker, and Victor Scholten. 1998. “A Two-Level Network for Recycling Sand: A Case Study.” European Journal of Operational Research 110 (2): 199–214. https://doi.org/10.1016/S0377-2217(98)00093-9.
  • Bassil, Jade, Gabrielle Dreux, and Gwendolyn Eastaugh. 2018. “Chemical Recycling of Polystyrene using Pyrolysis.” https://repository.upenn.edu/cbe_sdr/103.
  • Bing, Xiaoyun, Jacqueline M. Bloemhof-Ruwaard, and Jack G. A. J. Van der Vorst. 2014. “Sustainable Reverse Logistics Network Design for Household Plastic Waste.” Flexible Services and Manufacturing Journal 26 (1–2): 119–142. https://doi.org/10.1007/s10696-012-9149-0.
  • Cardoso, Sónia R., Ana P. Barbosa-Póvoa, and Susana Relvas. 2013. “Design and Planning of Supply Chains with Integration of Reverse Logistics Activities Under Demand Uncertainty.” European Journal of Operational Research 226 (3): 436–451. https://doi.org/10.1016/j.ejor.2012.11.035.
  • Cardoso, Sónia R., Ana P. Barbosa-Póvoa, and Susana Relvas. 2016. “Integrating Financial Risk Measures Into the Design and Planning of Closed-Loop Supply Chains.” Computers & Chemical Engineering 85: 105–123. https://doi.org/10.1016/j.compchemeng.2015.10.012.
  • Carter, Craig R., and Lisa M. Ellram. 1998. “Reverse Logistics: A Review of the Literature and Framework for Future Investigation.” Journal of Business Logistics 19 (1): 85–102.
  • Chanintrakul, Piyawat, Adrian E. C. Mondragon, Chandra Lalwani, and Chee Y. Wong. 2009. “Reverse Logistics Network Design: A State-of-the-Art Literature Review.” International Journal of Business Performance and Supply Chain Modelling 1 (1): 61. https://doi.org/10.1504/IJBPSCM.2009.026266.
  • Cobo, Selene, Antonio Dominguez-Ramos, and Angel Irabien. 2018. “From Linear to Circular Integrated Waste Management Systems: A Review of Methodological Approaches.” Resources, Conservation and Recycling 135: 279–295. https://doi.org/10.1016/j.resconrec.2017.08.003.
  • Conversio. 2020. “Waste Generation, Waste Streams and Recycling Potentials of HBCD Containing EPS/XPS Waste in Europe and Forecast Model Up to 2050: Final Report.” https://polystyreneloop.eu/wp-content/uploads/2021/01/Conversio-study.pdf.
  • Conversio. 2022. “Stoffstrombild Kunststoffe in Deutschland 2021: Zahlen und Fakten zum Lebensweg von Kunststoffen.” Mainaschaff. https://www.bvse.de/dateien2020/2-PDF/01-Nachrichten/03-Kunststoff/2022/Kurzfassung_Stoffstrombild_2021_13102022_1_.pdf.
  • Cooper, Leon. 1963. “Location-Allocation Problems.” Operations Research 11 (3): 331–343. https://doi.org/10.1287/opre.11.3.331.
  • Dat, Luu Q., Doan T. Truc Linh, Shuo-Yan Chou, and Vincent F. Yu. 2012. “Optimizing Reverse Logistic Costs for Recycling End-of-Life Electrical and Electronic Products.” Expert Systems with Applications39 (7): 6380–6387. https://doi.org/10.1016/j.eswa.2011.12.031.
  • De Brito, Marisa P., and Rommert Dekker. 2004. “A Framework for Reverse Logistics.” In Reverse Logistics: Quantitative Models for Closed-Loop Supply Chains, edited by Rommert Dekker, Moritz Fleischmann, Karl Inderfurth, and Luk N. Van Wassenhove, 3–27. Berlin Heidelberg: Springer.
  • De Brito, Marisa P., Rommert Dekker, and Simme Douwe P. Flapper. 2005. “Reverse Logistics: A Review of Case Studies.” In Distribution Logistics, edited by Bernhard Fleischmann and Andreas Klose, 243–281. Berlin Heidelberg: Springer.
  • Demacsek, Clemens, Lein Tange, Alix Reichenecker, and Gerald Altnau. 2019. “PolyStyreneLoop – The Circular Economy in Action.” IOP Conference Series: Earth and Environmental Science 323 (1): 012149. https://doi.org/10.1088/1755-1315/323/1/012149.
  • Demirel, Eray, Neslihan Demirel, and Hadi Gökçen. 2016. “A Mixed Integer Linear Programming Model to Optimize Reverse Logistics Activities of End-of-Life Vehicles in Turkey.” Journal of Cleaner Production 112: 2101–2113. https://doi.org/10.1016/j.jclepro.2014.10.079.
  • Dolgui, Alexandre, and Dmitry Ivanov. 2021. “Ripple Effect and Supply Chain Disruption Management: New Trends and Research Directions.” International Journal of Production Research 59 (1): 102–109. https://doi.org/10.1080/00207543.2021.1840148.
  • ECB. 2023. “ECB Staff Macroeconomic Projections for the Euro Area.” https://www.ecb.europa.eu/pub/projections/html/ecb.projections202303_ecbstaff77c0227058.de.html.
  • El-Sayed, Mona S., Nahid Afia, and Amin El-Kharbotly. 2010. “A Stochastic Model for Forward–Reverse Logistics Network Design Under Risk.” Computers & Industrial Engineering 58 (3): 423–431. https://doi.org/10.1016/j.cie.2008.09.040.
  • Esa, Mohd R., Anthony Halog, and Lucia Rigamonti. 2017. “Developing Strategies for Managing Construction and Demolition Wastes in Malaysia Based on the Concept of Circular Economy.” Journal of Material Cycles and Waste Management 19 (3): 1144–1154. https://doi.org/10.1007/s10163-016-0516-x.
  • European Union. 2008. “Directive 2008/98/EC of the European Parliament and of the Council of 19 November 2008 on Waste and Repealing Certain Directives.” Official Journal of the European Union L 312: 3–30. December 17, 2021. https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:32008L0098&from=EN
  • European Union. 2019a. “The European Green Deal: COM (2019) 640 Final.” https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52019DC0640.
  • European Union. 2019b. “Regulation (EU) 2019/1021 of the European Parliament and of the Council of 20 June 2019 on Persistent Organic Pollutants (Recast) (Text with EEA Relevance).” Official Journal of the European Union L 169: 45–77. December 17, 2021. http://data.europa.eu/eli/reg/2019/1021/oj
  • European Union. 2020. “A New Circular Economy Action Plan for a Cleaner and More Competitive Europe: COM/2020/98 Final.” https://eur-lex.europa.eu/legal-content/EN/TXT/PDF/?uri=CELEX:52020DC0098.
  • Fleischmann, Moritz, Patrick Beullens, Jacqueline M. Bloemhof-Ruwaard, and Luk N. Van Wassenhove. 2001. “The Impact of Product Recovery on Logistics Network Design.” Production and Operations Management 10 (2): 156–173. https://doi.org/10.1111/j.1937-5956.2001.tb00076.x.
  • Fleischmann, Moritz, Jacqueline M. Bloemhof-Ruwaard, Rommert Dekker, Erwin Van der Laan, Jo A. E. E. Van Nunen, and Luk N. Van Wassenhove. 1997. “Quantitative Models for Reverse Logistics: A Review.” European Journal of Operational Research 103 (1): 1–17. https://doi.org/10.1016/S0377-2217(97)00230-0.
  • Fleischmann, Mortiz, Hans Ronald Krikke, Rommert Dekker, and Simme Douwe P. Flapper. 2000. “A Characterisation of Logistics Networks for Product Recovery.” Omega 28 (6): 653–666. https://doi.org/10.1016/S0305-0483(00)00022-0.
  • Fonseca, M. Conceição, Álvaro García-Sánchez, Miguel Ortega-Mier, and Francisco Saldanha-da Gama. 2010. “A Stochastic Bi-Objective Location Model for Strategic Reverse Logistics.” TOP 18 (1): 158–184. https://doi.org/10.1007/s11750-009-0107-2.
  • García, María T., Ignacio Gracia, Gema Duque, Antonio De Lucas, and Juan Francisco Rodríguez. 2009. “Study of the Solubility and Stability of Polystyrene Wastes in a Dissolution Recycling Process.” Waste Management 29 (6): 1814–1818. https://doi.org/10.1016/j.wasman.2009.01.001.
  • Geldermann, Jutta. 2014. Anlagen- und Energiewirtschaft Kosten- und Investitionsschätzung sowie Technikbewertung von Industrieanlagen. München: Verlag Franz Vahlen.
  • Ghiani, Gianpaolo, Demetrio Laganà, Emanuele Manni, Roberto Musmanno, and Daniele Vigo. 2014. “Operations Research in Solid Waste Management: A Survey of Strategic and Tactical Issues.” Computers & Operations Research 44: 22–32. https://doi.org/10.1016/j.cor.2013.10.006.
  • Govindan, Kannan, and Mia Hasanagic. 2018. “A Systematic Review on Drivers, Barriers, and Practices Towards Circular Economy: A Supply Chain Perspective.” International Journal of Production Research56 (1–2): 278–311. https://doi.org/10.1080/00207543.2017.1402141.
  • Govindan, Kannan, Parichehr Paam, and Amir-Reza Abtahi. 2016. “A Fuzzy Multi-Objective Optimization Model for Sustainable Reverse Logistics Network Design.” Ecological Indicators 67: 753–768. https://doi.org/10.1016/j.ecolind.2016.03.017.
  • Govindan, Kannan, Hamed Soleimani, and Devika Kannan. 2015. “Reverse Logistics and Closed-Loop Supply Chain: A Comprehensive Review to Explore the Future.” European Journal of Operational Research 240 (3): 603–626. https://doi.org/10.1016/j.ejor.2014.07.012.
  • Hasani, Aliakbar, Seyed H. Zegordi, and Ehsan Nikbakhsh. 2012. “Robust Closed-Loop Supply Chain Network Design for Perishable Goods in Agile Manufacturing Under Uncertainty.” International Journal of Production Research 50 (16): 4649–4669. https://doi.org/10.1080/00207543.2011.625051.
  • Hatefi, S. Morteza, and Fariborz Jolai. 2014. “Robust and Reliable Forward–Reverse Logistics Network Design Under Demand Uncertainty and Facility Disruptions.” Applied Mathematical Modelling 38 (9–10): 2630–2647. https://doi.org/10.1016/j.apm.2013.11.002.
  • Heger. 2021. “THE LION – Der Verdichter macht aus Kunststoff-Abfallkosten Rohstoffeinnahmen.” December 9, 2021. https://heger-world.de/tl_files/content/downloads/de_the-lion-broschuere.pdf.
  • Heller, Niklas, and Sabine Flamme. 2020. “Waste Management of Deconstructed External Thermal Insulation Composite Systems with Expanded Polystyrene in the Future.” Waste Management & Research 38 (4): 400–407. https://doi.org/10.1177/0734242X20904413.
  • Hiete, Michael, Julian Stengel, Jens Ludwig, and Frank Schultmann. 2011. “Matching Construction and Demolition Waste Supply to Recycling Demand: A Regional Management Chain Model.” Building Research & Information 39 (4): 333–351. https://doi.org/10.1080/09613218.2011.576849.
  • Hopewell, Jefferson, Robert Dvorak, and Edward Kosior. 2009. “Plastics Recycling: Challenges and Opportunities.” Philosophical Transactions of the Royal Society B: Biological Sciences 364 (1526): 2115–2126. https://doi.org/10.1098/rstb.2008.0311.
  • Hosseini, M. Reza, Raufdeen Rameezdeen, Nicholas Chileshe, and Steffen Lehmann. 2015. “Reverse Logistics in the Construction Industry.” Waste Management & Research : The Journal of the International Solid Wastes and Public Cleansing Association, ISWA 33 (6): 499–514. https://doi.org/10.1177/0734242X15584842.
  • Hoyer, Claas, Karsten Kieckhäfer, and Thomas S. Spengler. 2015. “Technology and Capacity Planning for the Recycling of Lithium-Ion Electric Vehicle Batteries in Germany.” Journal of Business Economics85 (5): 505–544. https://doi.org/10.1007/s11573-014-0744-2.
  • ITAD. 2022. “Mitgliedsanlagen ITAD.” May 10, 2023. https://www.itad.de/ueber-uns/anlagen.
  • Ivanov, Dmitry. 2022. “Viable Supply Chain Model: Integrating Agility, Resilience and Sustainability Perspectives-Lessons from and Thinking Beyond the COVID-19 Pandemic.” Annals of Operations Research 319 (1): 1411–1431. https://doi.org/10.1007/s10479-020-03640-6.
  • Ivanov, Dmitry, Boris Sokolov, and Alexandre Dolgui. 2014. “The Ripple Effect in Supply Chains: Trade-Off ‘Efficiency-Flexibility-Resilience’ in Disruption Management.” International Journal of Production Research 52 (7): 2154–2172. https://doi.org/10.1080/00207543.2013.858836.
  • Jeswani, Harish, Christian Krüger, Manfred Russ, Maike Horlacher, Florian Antony, Simon Hann, and Adisa Azapagic. 2021. “Life Cycle Environmental Impacts of Chemical Recycling Via Pyrolysis of Mixed Plastic Waste in Comparison with Mechanical Recycling and Energy Recovery.” Science of the Total Environment 769: 144483. https://doi.org/10.1016/j.scitotenv.2020.144483.
  • Kara, Selin S., and Semih Onut. 2010. “A Stochastic Optimization Approach for Paper Recycling Reverse Logistics Network Design under Uncertainty.” International Journal of Environmental Science & Technology 7 (4): 717–730. https://doi.org/10.1007/BF03326181.
  • Kirchherr, Julian, Laura Piscicelli, Ruben Bour, Erica Kostense-Smit, Jennifer Muller, Anne Huibrechtse-Truijens, and Marko Hekkert. 2018. “Barriers to the Circular Economy: Evidence From the European Union (EU).” Ecological Economics 150: 264–272. https://doi.org/10.1016/j.ecolecon.2018.04.028.
  • Koopmans, Tjalling C. 1951. “Efficient Allocation of Resources.” Econometrica 19 (4): 455–465. https://doi.org/10.2307/1907467.
  • Kroon, Leo, and Gaby M. C. Vrijens. 1995. “Returnable Containers: An Example of Reverse Logistics.” International Journal of Physical Distribution & Logistics Management 25 (2): 56–68. https://doi.org/10.1108/09600039510083934.
  • Larrain, Macarena, Steven Van Passel, Gwenny Thomassen, Uros Kresovic, Nick Alderweireldt, Erik Moerman, and Pieter Billen. 2020. “Economic Performance of Pyrolysis of Mixed Plastic Waste: Open-Loop versus Closed-Loop Recycling.” Journal of Cleaner Production 270: 122442. https://doi.org/10.1016/j.jclepro.2020.122442.
  • Mar-Ortiz, Julio, Belarmino Adenso-Diaz, and Jose L. González-Velarde. 2011. “Design of a Recovery Network for WEEE Collection: The Case of Galicia, Spain.” Journal of the Operational Research Society62 (8): 1471–1484. https://doi.org/10.1057/jors.2010.114.
  • Mark, Frank E., Juergen Vehlow, Hans Dresch, Bogdan Dima, Werner Grüttner, and Joachim Horn. 2015. “Destruction of the Flame Retardant Hexabromocyclododecane in a Full-Scale Municipal Solid Waste Incinerator.” Waste Management & Research 33 (2): 165–174. https://doi.org/10.1177/0734242X14565226.
  • Material Economics. 2020. “Industrial Transformation 2050 – Pathways to Net-Zero Emissions from EU Heavy Industry.” https://materialeconomics.com/material-economics-industrial-transformation-2050.pdf?cms_fileid=303ee49891120acc9ea3d13bbd498d13.
  • Mäurer, Andreas, and Martin Schlummer. 2014. “Recyclingfähigkeit von Wärmedämmverbundsystemen mit Styropor.” In Mineralische Nebenprodukte und Abfälle, edited by Karl J. Thomé-Kozmiensky. Neuruppin: Thomé-Kozmiensky Verlag GmbH.
  • Morseletto, Piero. 2020. “Targets for a Circular Economy.” Resources, Conservation and Recycling 153: 104553. https://doi.org/10.1016/j.resconrec.2019.104553.
  • Mutha, Akshay, and Shaligram Pokharel. 2009. “Strategic Network Design for Reverse Logistics and Remanufacturing Using New and Old Product Modules.” Computers & Industrial Engineering 56 (1): 334–346. https://doi.org/10.1016/j.cie.2008.06.006.
  • Netsch, Niklas, Martin Simons, Alexander Feil, Hans Leibold, Frank Richter, Julia Slama, Savina Padumane Yogish, Kathrin Greiff, and Dieter Stapf. 2022. “Recycling of Polystyrene-Based External Thermal Insulation Composite Systems – Application of Combined Mechanical and Chemical Recycling.” Waste Management 150: 141–150. https://doi.org/10.1016/j.wasman.2022.07.001.
  • Neumann, Hans-Hermann. 2009. Praxis-Handbuch Wärmedämm-Verbundsysteme: Baustoffkunde, Verarbeitung, Schäden, Sanierung. Köln: Verlagsgesellschaft Rudolf Müller GmbH & Co. KG.
  • Özçelik, Gökhan, Ömer F. Yılmaz, and Fatma B. Yeni. 2021. “Robust Optimisation for Ripple Effect on Reverse Supply Chain: An Industrial Case Study.” International Journal of Production Research 59 (1): 245–264. https://doi.org/10.1080/00207543.2020.1740348.
  • Pan, Xiyu, Qiu Xie, and Yingbin Feng. 2020. “Designing Recycling Networks for Construction and Demolition Waste Based on Reserve Logistics Research Field.” Journal of Cleaner Production 260: 120841. https://doi.org/10.1016/j.jclepro.2020.120841.
  • Pati, Rupesh K., Prem Vrat, and Pradeep Kumar. 2008. “A Goal Programming Model for Paper Recycling System.” Omega 36 (3): 405–417. https://doi.org/10.1016/j.omega.2006.04.014.
  • Peters, Max S., Klaus D. Timmerhaus, and Ronald E. West. 2004. Plant Design and Economics for Chemical Engineers. 5th ed. McGraw-Hill Chemical Engineering Series. Boston: McGraw-Hill.
  • Pinto, Filomena, Paula Costa, Ibrahim Gulyurtlu, and Iasbel Cabrita. 1999. “Pyrolysis of Plastic Wastes. 1. Effect of Plastic Waste Composition on Product Yield.” Journal of Analytical and Applied Pyrolysis51 (1–2): 39–55. https://doi.org/10.1016/S0165-2370(99)00007-8.
  • Pishvaee, Mir S., Masoud Rabbani, and Seyed A. Torabi. 2011. “A Robust Optimization Approach to Closed-Loop Supply Chain Network Design Under Uncertainty.” Applied Mathematical Modelling 35 (2): 637–649. https://doi.org/10.1016/j.apm.2010.07.013.
  • Pishvaee, Mir S., and Seyed A. Torabi. 2010. “A Possibilistic Programming Approach for Closed-Loop Supply Chain Network Design Under Uncertainty.” Fuzzy Sets and Systems 161 (20): 2668–2683. https://doi.org/10.1016/j.fss.2010.04.010.
  • PlasticsEurope. 2022. “Plastics – The Facts 2022.” May 10, 2023. https://plasticseurope.org/knowledge-hub/plastics-the-facts-2022/.
  • Pretz, Thomas, and Alexander Feil. 2017. “Aufbereitung fester Abfallstoffe.” In Einführung in die Kreislaufwirtschaft, edited by Martin Kranert, 189–252. Wiesbaden: Springer Fachmedien Wiesbaden.
  • Quariguasi Frota Neto, João, Grit Walther, Jaqueline Bloemhof, J. A. E. E. Van Nunen, and Thomas Spengler. 2010. “From Closed-Loop to Sustainable Supply Chains: The WEEE Case.” International Journal of Production Research 48 (15): 4463–4481. https://doi.org/10.1080/00207540902906151.
  • Ragaert, Kim, Laurens Delva, and Kevin Van Geem. 2017. “Mechanical and Chemical Recycling of Solid Plastic Waste.” Waste Management 69: 24–58. https://doi.org/10.1016/j.wasman.2017.07.044.
  • Rahimi, Ali R., and Jeannette M. García. 2017. “Chemical Recycling of Waste Plastics for New Materials Production.” Nature Reviews Chemistry 1 (6): 1–11. https://doi.org/10.1038/s41570-017-0046.
  • Rahimi, Mohsen, and Vahidreza Ghezavati. 2018. “Sustainable Multi-Period Reverse Logistics Network Design and Planning Under Uncertainty Utilizing Conditional Value at Risk (CVaR) for Recycling Construction and Demolition Waste.” Journal of Cleaner Production 172: 1567–1581. https://doi.org/10.1016/j.jclepro.2017.10.240.
  • Realff, Matthew J., Jane C. Ammons, and David Newton. 1999. “Carpet Recycling: Determining the Reverse Production System Design.” Polymer-Plastics Technology and Engineering 38 (3): 547–567. https://doi.org/10.1080/03602559909351599.
  • Rentizelas, Athanasios, Nikoletta Trivyza, Sarah Oswald, and Stefan Siegl. 2022. “Reverse Supply Network Design for Circular Economy Pathways of Wind Turbine Blades in Europe.” International Journal of Production Research 60 (6): 1795–1814. https://doi.org/10.1080/00207543.2020.1870016.
  • Riedewald, Frank, Yunus Patel, Edward Wilson, Silvia Santos, and Maria Sousa-Gallagher. 2021. “Economic Assessment of a 40,000 T/y Mixed Plastic Waste Pyrolysis Plant Using Direct Heat Treatment with Molten Metal: A Case Study of a Plant Located in Belgium.” Waste Management 120: 698–707. https://doi.org/10.1016/j.wasman.2020.10.039.
  • Rogers, Dale S., and Ronald Tibben-Lembke. 2001. “An Examination of Reverse Logistics Practices.” Journal of Business Logistics 22 (2): 129–148. https://doi.org/10.1002/j.2158-1592.2001.tb00007.x.
  • Rubio, Sergio, Antonio Chamorro, and Francisco J. Miranda. 2008. “Characteristics of the Research on Reverse Logistics (1995–2005).” International Journal of Production Research 46 (4): 1099–1120. https://doi.org/10.1080/00207540600943977.
  • Salema, Maria I. G., Ana P. Barbosa-Povoa, and Augusto Q. Novais. 2007. “An Optimization Model for the Design of a Capacitated Multi-Product Reverse Logistics Network with Uncertainty.” European Journal of Operational Research 179 (3): 1063–1077. https://doi.org/10.1016/j.ejor.2005.05.032.
  • Salmenperä, Hanna, Kati Pitkänen, Petrus Kautto, and Laura Saikku. 2021. “Critical Factors for Enhancing the Circular Economy in Waste Management.” Journal of Cleaner Production 280: 124339. https://doi.org/10.1016/j.jclepro.2020.124339.
  • Sasikumar, P., Kannan Govindan, and A. Noorul Haq. 2010. “A Multi-Echelon Reverse Logistics Network Design for Product Recovery–A Case of Truck Tire Remanufacturing.” The International Journal of Advanced Manufacturing Technology 49 (9–12): 1223–1234. https://doi.org/10.1007/s00170-009-2470-4.
  • Schleier, Julia, Martin Simons, Kathrin Greiff, and Grit Walther. 2022. “End-of-Life Treatment of EPS-Based Building Insulation Material – An Estimation of Future Waste and Review of Treatment Options.” Resources, Conservation and Recycling 187: 106603. https://doi.org/10.1016/j.resconrec.2022.106603.
  • Sheriff, Mahaboob K. M., Nachiappan Subramanian, Shams Rahman, and Jayanth Jayaram. 2017. “Integrated Optimization Model and Methodology for Plastics Recycling: Indian Empirical Evidence.” Journal of Cleaner Production 153: 707–717. https://doi.org/10.1016/j.jclepro.2016.07.137.
  • Snyder, Lawrence V., Maria P. Scaparra, Mark S. Daskin, and Richard L. Church. 2014. “Planning for Disruptions in Supply Chain Networks.” INFORMS TutORials in Operations Research 234–257. https://doi.org/10.1287/educ.1063.0025.
  • Solis, Martyna, and Semida Silveira. 2020. “Technologies for Chemical Recycling of Household Plastics – A Technical Review and TRL Assessment.” Waste Management 105: 128–138. https://doi.org/10.1016/j.wasman.2020.01.038.
  • Sommer, Valentin. 2021. “Information on Acceptance Costs for EPS-Based Insulation Material at the Waste Incineration Plant Oberhausen (Remondis).” Personal communication to Julia Schleier on 12/20/2021.
  • Sommer, Valentin, Jan Stockschläder, and Grit Walther. 2020. “Estimation of Glass and Carbon Fiber Reinforced Plastic Waste from End-of-Life Rotor Blades of Wind Power Plants Within the European Union.” Waste Management 115: 83–94. https://doi.org/10.1016/j.wasman.2020.06.043.
  • Srivastava, Samir K. 2008. “Network Design for Reverse Logistic.” Omega 36 (4): 535–548. https://doi.org/10.1016/j.omega.2006.11.012.
  • Tadaros, Marduch, Atanasios Migdalas, Björn Samuelsson, and Anders Segerstedt. 2022. “Location of Facilities and Network Design for Reverse Logistics of Lithium-Ion Batteries in Sweden.” Operational Research 22 (2): 895–915. https://doi.org/10.1007/s12351-020-00586-2.
  • Trochu, Julien, Amin Chaabane, and Mustapha Ouhimmou. 2018. “Reverse Logistics Network Redesign Under Uncertainty for Wood Waste in the CRD Industry.” Resources, Conservation and Recycling 128: 32–47. https://doi.org/10.1016/j.resconrec.2017.09.011.
  • Trochu, Julien, Amin Chaabane, and Mustapha Ouhimmou. 2020. “A Carbon-Constrained Stochastic Model for Eco-Efficient Reverse Logistics Network Design Under Environmental Regulations in the CRD Industry.” Journal of Cleaner Production 245: 118818. https://doi.org/10.1016/j.jclepro.2019.118818.
  • UNEP. 2019. “Stockholm Convention on Persistent Organic Pollutants (POPs): Text and Annexes (Revised in 2019).” http://chm.pops.int/Portals/0/download.aspx?d=UNEP-POPS-COP-CONVTEXT-2021.English.pdf.
  • Van Engeland, Jens, Jeroen Beliën, Liesje De Boeck, and Simon De Jaeger. 2020. “Literature Review: Strategic Network Optimization Models in Waste Reverse Supply Chains.” Omega 91: 102012. https://doi.org/10.1016/j.omega.2018.12.001.
  • vdz. 2022. “Zementindustrie im Überblick 2021/2022.” Düsseldorf. https://www.vdz-online.de/fileadmin/wissensportal/publikationen/zementindustrie/zementindustrie_ueberblick/VDZ-Zementindustrie_im_Ueberblick_2021_2022.pdf.
  • Vollmer, Ina, Michael J. F. Jenks, Mark C. P. Roelands, Robin J. White, Toon Van Harmelen, Paul De Wild, Gerard P. Van der Laan, et al. 2020. “Beyond Mechanical Recycling: Giving New Life to Plastic Waste.” Angewandte Chemie (International ed. in English) 59 (36): 15402–15423. https://doi.org/10.1002/anie.201915651.
  • Yılmaz, Ömer F., Gökhan Özçelik, and Fatma B. Yeni. 2021. “Ensuring Sustainability in the Reverse Supply Chain in Case of the Ripple Effect: A Two-Stage Stochastic Optimization Model.” Journal of Cleaner Production 282: 124548. https://doi.org/10.1016/j.jclepro.2020.124548.
  • Zeballos, Luis J., Carlos A. Méndez, Ana P. Barbosa-Povoa, and Augusto Q. Novais. 2014. “Multi-Period Design and Planning of Closed-Loop Supply Chains with Uncertain Supply and Demand.” Computers & Chemical Engineering 66: 151–164. https://doi.org/10.1016/j.compchemeng.2014.02.027.
  • Zhou, Xiaoguang, and Yanhui Zhou. 2015. “Designing a Multi-Echelon Reverse Logistics Operation and Network: A Case Study of Office Paper in Beijing.” Resources, Conservation and Recycling 100: 58–69. https://doi.org/10.1016/j.resconrec.2015.04.009.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.