AGVSim2-a development tool for AGVS controller design

REFERENCES

• ANDERSON , M. , 1985 , AGV system simulation—a planning tool for AGV route layout . Proceedings of the 3rd International Conference on Automated Guided Vehicle Systems ( Kempston , Bedford IFS Ltd ), pp. 291 – 295 .
   Google Scholar
• BAFNA , K. M. , 1981 , Use of computer simulation in designing complex material handlingsystems . Proceedings of the 1981 Winter Simulation Conference , Atlanta , GA , pp. 181 – 184 .
   Google Scholar
• DAVIS , D. A. , 1986 , Modeling AGV systems . Proceedings of the 1986 Winter SimulationConference , Alexandria , VA , pp. 568 – 574 .
   Google Scholar
• DUFFAU , B. ,BARDIN, C, 1985 , Evaluating AGVS circuits by simulation . Proceedings of 3rdInternational Conference on Automated Guided Vehicle Systems , ( Kempston , Bedford IFS Ltd .), pp. 229 – 245 . IFS Ltd, UK, Stockholm, Sweden .
   Google Scholar
• EGBELU , P. J. , 1982 , A design methodology for operational control elements for automatic guidedvehicle based material handling systems . Ph. D. dissertation , Virginia PolytechnicInstitute and State University , Blacksburg , VA .
   Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1984 , Characterization of automatic guided vehicledispatching rules . International Journal of Production Research , 22 , 359 – 374 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1982 , Operational Considerations for the Design ofAutomatic Guided Vehicle Based Material Handling Systems . Technical Report no. 8201 , Department of Industrial Engineering and Operations Research , VPI and SU , Blacksburg , VA .
   Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1982 , AGUSim users' manual . Technical Report no. 8204 , Department of Industrial Engineering and Operations Research, Virginia PolytechnicInstitute and State University , Blacksburg , VA .
   Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1986 , Potentials for bidirectional guidepath for automaticguided vehicle systems . International Journal of Production Research , 24 , 1075 – 1099 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , 1987 , The use of non-simulation approaches in estimating vehicle requirements inan automatic guided vehicle based transport system . Material Flow , 4 , 17 – 32 .
   Web of Science ®Google Scholar
• GASKINS , R. J. , 1987 , A simulation tool for the evaluation of real-time free-ranging AGVsupervisory controller , M.S.I.E. thesis , School of Industrial Engineering, PurdueUniversity , West Lafayette , IN .
   Google Scholar
• GASKINS , R. J. , and TANCHOCO , J. M. A. , 1987 , Flow path design for automated guided vehiclesystems . International Journal of Production Research , 25 , 667 – 676 .
   Web of Science ®Google Scholar
• GASKINS , R. J. , TANCHOCO , J. M. A. , and TAGHABONI , F. , 1989 , Virtual flow paths for free-rangingautomated guided vehicle systems . International Journal of Production Research , 27 , p91—100 p.
   Google Scholar
• GRANT , F. H. , and MACFARLAND , D. G. , 1984 , Simulation with C. Proceedings of the 1984 WinterSimulation Conference , Dallas , TX , 491 – 496 .
   Google Scholar
• HARMONOSKY , C. M. , and SADOWSKI , R. P. , 1984 , A simulation model and analysis integratingAGVs with non-automated material handling . Proceedings of the 1984 Winter SimulationConference , 341 – 348 .
   Google Scholar
• KLITZ , J. K. , 1983 , Simulation of an automated logistics and manufacturing system . EuropeanJournal of Operation Research , 14 , 36 – 39 .
   Google Scholar
• KOFF , G. A. , 1987 , Automatic guided vehicle systems applications, controls and planning . Material Flow , 4 , 3 – 16 .
   Google Scholar
• MAXWELL , W. L. , and MUCKSTADT , J. A. , 1982 , Design of automatic guided vehicle systems . HETransactions , 14 , 114 – 124 .
   Web of Science ®Google Scholar
• POPE , D. N. , 1984 , A review of graphic animation of manufacturing systems . SME TechnicalPaper, Autofact 6 Conference Proceedings , Anaheim , CA , 24 . 1 – 24 . 12 .
   Google Scholar
• PRITSKER , A. A. B. , 1984 , Introduction to Simulation and SLAM II ( New York John Wiley and Sons ).
   Google Scholar
• QUINN , E. B. , 1985 , A simulation based system for automatic development and testing of AGVcontrol software . Proceedings of 3rd International Conference on Automated Guided Vehicle Systems , ( Kempston , Bedford IFS Ltd .), 219 – 227 .
   Google Scholar
• TAGHABONI , F. , 1986 , An intelligent controller for free-ranging automated guided vehiclesystems . M.S.I.E. Thesis , School of Industrial Engineering, Purdue University , West Lafayette , IN .
   Google Scholar
• TAGHABONI , F. , and TANCHOCO , J. M. W. , 1988 , A LISP-based controller for free-ranging automated guided vehicle . International Journal of Production Research , 26 , 173 – 188 .
   Web of Science ®Google Scholar
• TANCHOCO , J. M. A. , EGBELU , P. J. , and TAGHABONI , F. , 1987 , Determination of the total number of vehicles in an AGV-based material transport system , Material Flow , 4 , 33 – 51 .
   Google Scholar
• TANCHOCO , J. M. A. , WYSK , R. A. , DAVIS , R. P. , AGEE , M. H. , 1979 , Economic unit loads andits impact on material flow systems planning . Proceedings of the 1979 Fall HE Conference , Houston , TX , 141 – 147 .
   Google Scholar
• TURNER , D. H. , The future of manufacturing simulation . Autofact '86 Conference Proceedings , Detroit , MI , 1986 .
   Google Scholar
• VOELKER , W. A. , 1987 , Computer graphics animation for a free-ranging AGVcontroller/simulator . M.S.I.E. Thesis , School of Industrial Engineering, PurdueUniversity , West Lafayette , IN .
   Google Scholar