References
- AMITAY , G. , MALKIN , S. , and KOREN , Y. , 1981 , Adaptive control optimization of grinding. Journal of Engineering for Industry , 103 , 103 – 108 .
- ARMAREGO , E. J. A. , and BROWN , R. H. , 1969 , The Machining of Metals ( Englewood Cliffs , New Jersey Prentice-Hall ) .
- ARSOVSKI , S. M. , 1983 , Wear sensors in the adaptive control systems of machine tools. International Journal of Product Research , 21 , 347 – 356 .
- BALAKRISHNAN , P. , and DEVRIES , M. F. , 1985 , Sequential estimation of machinability parameters for adaptive optimization of machinability data systems. Journal of Engineering for Industry , 107 , 159 – 166 .
- BEDINI , R. , PINOTTI , P. C. , 1982 , Experiments on adaptive constrained control of a CNC lathe. Journal of Engineering for Industry , 104 , 139 – 149 .
- BEN-DAVID , A. , STERLING , L. , and KOVAC , J. A. , 1987 , Knowledge integration of process design optimization and troubleshooting in machining. Technical Report TR 87-102 . Center for Automation and Intelligent Systems , CWRU .
- BHATTACHARYA , A. , FARIA-GONZALEZ , R. , and HAM , I. , 1970 , Regression analysis for predicting surface finish and its application in the determination of optimum machining conditions. Journal of Engineering for Industry , 92 , 711 – 714 .
- BOOTHROYD , G. , and RUSEK , P. , 1976 , Maximum rate of profit criterion in machining. Journal of Engineering for Industry , 98 , 217 – 220 .
- BOYER, M. E. (Ed.) , 1985 , Metals Handbook Desk Edition ( Metals Park , OH American Society of Metals ) .
- CHANDIRAMANI , K. L. , and COOK , N. H. , 1964 , Investigation on the nature of surface finish and its variation with cutting speed. Journal of Engineering for Industry , 86 , 134 – 140 .
- CHANG , T. C , and WYSK , R. A. , 1985 , An Introduction to Automated Process Planning ( Englewood Cliffs , New Jersey Prentice-Hall ) .
- CHANKONG , V. , and HAIMES , Y. Y. , 1983 , Multiobjective Decision Making Theory and Methodology ( New York North Holland ) .
- CONSIDINE, D. M. (Ed.), 1986 , Standard Handbook of Industrial Automation ( New York Chapman and Hall ) .
- DAVIS , R. P. , WYSK , R. A. , AGEE , M. H. , and KIMBLER , D. L. , 1980 , Optimizing machining parameters in a framework for adaptive computer control. Computers and Industrial Engineering , 4 143 – 151 .
- DEVIPRASAD , J. , 1987 , A method for off-line and on-line multiobjective optimization for machining , Unpublished M.S. Thesis , Case Western Reserve University , Cleveland , Ohio .
- EL GOMAYEL , J, l. , and BREGGER , K. D. , 1986 , On-line tool wear sensing for turning operations. Journal of Engineering for Industry , 108 , 44 – 47 .
- ERMER , D. S. , and KROMODIHARDJO , S. , 1981 , Optimization of multipass turning with constraints. Journal of Engineering for Industry , 103 , 462 – 468 .
- FINDEISEN , W. , BAILEY , F. N. , BRDYS , M. , MALINOSKI , K. , TATJEWSKI , P. , and WOZNIAK , A. , 1980 , Control and Coordination in Hierarchical Systems ( New York Wiley ) .
- HWANG , C. L. , and MASUD , A. S. M. , 1979 , Multiple Objective Decision Making-Methods and Applications ( Berlin Springer-Verlag ) .
- GEOFFRION , A. M. , DYER , J. S. ,FEINBERG, A,, 1972 , An interactive approach for multicriterion optimization with an application to the operation of an academic department. Management Science , 19 , 357 – 368 .
- GHIASSI , M. , DEVOR , R. E. , DESSOUKY , M. I. , and KUOWSKI , B. A. , 1984 , An application of multiple criteria decision making principles for planning machining operations. IIE Transactions , 16 , 106 – 114 .
- GOICOEDHEA , A. , HANSEN , D. R. , and DUCKSTEIN , L. , 1982 , Multiobjective Decision Analysis with Engineering and Business Applications ( New York Wiley ) .
- GROOVER , M. P. , 1987 , Automation, Production Systems, and Computer-Aided Manufacturing ( Englewood Cliffs , New Jersey Prentice-Hall ) .
- HATI , S. , and RAO , S. S. , 1974 , Determination of the optimum conditions-deterministic and probabilistic approaches. Journal of Engineering for Industry , 99 , 354 – 359 .
- HINDS , B. K. , 1973 , Control of tool wear during metal cutting using a computer and on-line measurements. International Journal of Production Research , 15 , 291 – 301 .
- HOUGH, JR , C. L. , and GOFORTH , R. E. , 1981 , Optimization of second order logarithmic machining economics problem by extended geometric programming. Part 1 unconstrained. AIIE Transactions , 13 , 151 – 159 .
- HWANG , C. L. , and MASUD , A. S. M. , 1979 , Multiple Objective Decision Making-Methods and Applications. ( Berlin Springer-Verlag ) .
- JANG , S. , JOSEPH , B. , and MUKAI , H. , 1987 , On-line optimization of constrained multivariable chemical processes. AIChE Journal , Paper No. 3264 .
- KEENEY , R. L. , and RAIFFA , H. , 1976 , Decisions with Multiple Objectives Preferences and Value Tradeoffs ( New York Wiley ) .
- KOTTENSTETTE , J. P. , 1986 , Measuring tool-chip interface temperature. Journal of Engineering for Industry , 108 , 101 – 106 .
- LANDAU , L. D. , 1979 , Adaptive Control ( New York Academic Press ) .
- LEE , S. H and KWAK , B. M. , 1981 , Adpative optimization of factory cutting conditions-a heuristic computer simulation applied to single point turning. International Journal of Production Research , 19 , 31 – 43 .
- LEFKOWITZ , I. , 1966 , Multilevel approach applied to control system design. Transactions of the ASME, Series B, Engineering , 88 , 392 – 398 .
- LEFKOWITZ , I. , 1982 , Hierarchical control in large scale industrial systems. Studies in Management Science and Systems , 7 , 65 – 98 .
- LINDSTROM , B. , and LINDBERG , B. , 1984 , Measurements of dynamic cutting forces in the cutting process, a new sensor for in-process measurement. Proceedings of the 24th International Machine Tool Design and Research Conference ( New York MacMillan Press ) , pp. 137 – 142 .
- MALAKOOTI , B. , 1988a , A decision support system and a heuristic interactive approach for solving discrete multiple criteria problems. IEEE Transactions on Systems, Man, and Cybernetics , 18 , 273 – 285 .
- MALAKOOTI , B. , 1988b , An exact interactive paired comparison method for exploring the efficient facets of MOLP problems with underlying quasi-concave utility functions. IEEE Transactions on Systems, Man, and Cybernetics , 18 , 787 – 801 .
- MALAKOOTI , B. , 1989a , An interactive hierarchical multi-objective approach for computer integrated manufacturing. Robotics and Computer-Integrated Manufacturing , 6 , 83 – 97 .
- MALAKOOTI , B. , 1989b , Ranking multiple criteria alternatives with half-space, convex, and non-convex dominating cones. Computers and Operations Research An International Journal, 16 , 117 – 127 .
- MALAKOOTI , B. , and DEVIPRASAD , J. , 1987 , An on-line multiobjective optimization method for machining operations. Working Paper No. pp7-2-1987 .
- MALAKOOTI , B. , and DEVIPRASAD , J. , 1989 , An interactive multiple criteria approach for parameter selection in metal cutting. Operations Research , 37 , 805 – 818 .
- MALAKOOTI , B. , and RAVINDRAN , A. , 1986 , Computational procedures with interactive paired comparison methods for MOLP problems. Annals of Operations Research , 5 , 575 – 597 .
- MALAKOOTI , B. , WANG , J. ,TANDLER, E. C, 1990 , An automated machinability evaluation system based on multiple criteria. International Journal of Production Research , 28 , 2373 – 2392 .
- MASORY , O. , and KOREN , Y. , 1983 , Variable gain adaptive control system for turning. Journal of Manufacturing Systems , 2 165 – 173 .
- MERCHANT , M. E. , 1977 , The inexorable push for automation. Production Engineering , Jan., 44 – 49 .
- MESAROVIC , M. D. , MACKO , D. , and TAKAHARA , Y. , 1970 , Theory of Hierarchical Multilevel Systems , ( New York Academic Press ) .
- METCUT, RESEARCH, ASSOCIATES , 1981 , Machinability Data Handbook ( Cincinnati , Ohio Machinability Data Center ) .
- NORTON , H. N. , 1982 , Sensor and Analyzer Handbook ( Englewood Cliffs , New Jersey Prentice-Hall ) .
- PHILIPSON , R. H. , and RAVINDRAN , A. , 1979 , Application of mathematical programming to metal cutting. Mathematical Programming , 11 , 116 – 134 .
- QUINLAN , J. C. , 1987 , New tool-wear sensors aid adaptive machining. Tool and Production , Dec. , 41 – 43 .
- RAO , S. B. , 1986 , Tool wear monitoring through the dynamics of stable turning. Journal of Engineering for Industry , 108 , 183 – 188 .
- RUDISILL , C , 1987 , Benefits of unattended machining. Machine Monitoring Sensorsfor Untended Machining ( Dearborn , MI Society of Manufacturing Engineers ) .
- SCHUBERT , P. B. , 1980 , Machinery Handbook ( New York Industrial Press Inc. ) .
- SHIRAISHI , M. , 1981 , In process measurement of surface roughness in turning by laser beams. Journal of Engineering for Industry , 103 , 203 – 209 .
- SUZUKI , H. , and WEINMANN , K. J. , 1985 , An on line tool wear sensor for straight turning operations. Journal of Engineering for Industry , 107 , 397 – 399 .
- STEUER , R. H. , 1986 , Multiple Criteria Optimization Theory, Computation, and Application ( New York Wiley ) .
- TAYLOR , F. W. , 1907 , On the art of cutting metals. Transactions ASME , 28 , 310 – 350 .
- YEN , D. W. , and WRIGHT , P. K. , 1983 , Adaptive control in machining-a new approach based on the physical constraints of tool wear mechanisms. Journal of Engineering for Industry , 105 , 31 – 38 .