Development of a framework to automate process planning functions and to determine machining parameters

REFERENCES

• ARCELUS , F. J. , and BANERJEE , P. K. , 1987 , Optimal production plan in a tool wear process with rewards for acceptable, undersized and oversized parts . Engineering Costs and Production Economics , 11 , 13 – 19 .
   Web of Science ®Google Scholar
• ARMAREGO , E. J. A. , and BROWN , R. H. , 1969 , The Machining of Metals ( NJ Prentice-Hall ).
   Google Scholar
• BEROLUND , J. , and HALLDEN , L. , 1963 , A discussion on a criterion for the choice between manufacturing on a positionally controlled milling machine and a conventional machine . International Journal of Production Researcj , 2 , 95 – 105 .
   Google Scholar
• BHATTACHARYYA , A. , FARIA-GONZALEZ , R. , and HAM , I. , 1970 , Regression analysis for predicting surface finish and its application in the determination of optimum machining conditions . Transactions of the ASME, Journal of Engineering for Industry , 92 , 711 – 714 .
   Web of Science ®Google Scholar
• DONTAMSETTI , S. , and FISCHER , G. W. , 1988 , Factors affecting surface roughness in finish turning of gray cast iron . Advanced Materials and Manufacturing Processes , 4 , 689 – 725 .
   Google Scholar
• ERMER , D. S. , and KROMODIHARDJO , S. , 1981 , Optimization of multipass turning with constraints . Transactions of the ASME, Journal of Engineering for Industry , 103 , 462 – 468 .
   Web of Science ®Google Scholar
• FISCHER , G. W. , WEI , Y. , and DONTAMSETTI , S. , 1989 , Process-controlled machining of gray cast iron . Journal of Mechanical Working Technology , 20 , 47 – 57 .
   Google Scholar
• GIBRA , I. N. , 1974 , Optimal production runs of processes subject to systematic trends . International Journal of Production Research , 12 , 511 – 517 .
   Google Scholar
• GOPALAKRISHNAN , B. , and AL-KHAYYAL , F. , 1991 , Machine parameter selection for turning with constraints an analytical approach based on geometric programming . International Journal of Production Research , 29 , 1897-1908 .
   Google Scholar
• GOYAL , S. K. , 1985 , The economics of two pass machining operations . Engineering Costs and Production Economics , 8 , 263 – 267 .
   Google Scholar
• HEDRICH , P. , and CARLSON , J. G. , 1989 , Conventional versus NC production the impact of tooling costs . Engineering Costs and Production Economics , 18 , 187 – 192 .
   Google Scholar
• HOFFMAN , E. G. , (ed.), 1984 , Fundamentals of Tool Design ( MN Society of Manufacturing Engineers ).
   Google Scholar
• IWATA , K. , MUROTSU , Y. , IWATSUBO , T. , and FUJII , S. , 1972 , A probabilistic approach to the determination of optimum cutting conditions . Transactions of the ASME, Journal of Engineering for Industry , 94 , 1099 – 1107 .
   Web of Science ®Google Scholar
• LINDBERG , R. A. , 1977 ; Processes and Materials of Manufacture ( MA Allyn and Bacon ).
   Google Scholar
• NEIBEL , B. W. , DRAPER , A. B. , and WYSK , R. A. , 1989 , Modern Manufacturing Process Engineering ( New York McGraw Hill ).
   Google Scholar
• PHILIPSON , R. H. , and RAVINDRAN , A. , 1979 , Application of mathematical programming to metal cutting . Mathematical Programming Study , 11 , 116 – 134 .
   Web of Science ®Google Scholar
• PHILLIPS , D. T. , and BEIGHTLER , C. S. , 1970 , Optimization in tool engineering using geometric programming . AIIE Transactions , 2 , 355 – 360 .
   Google Scholar
• RAJAGOPAL , J. , 1985 , A duality theory for geometric programming based on generalized linear programming . PhD dissertation, Department of Industrial Engineering , The University of Iowa , IA .
   Google Scholar
• RAMASWAMY , K. V. , and LAMBERT , B. K. , 1974 , Cost optimization for a single pass turning operation including inventory and penalty costs . International Journal of Production Research , 12 , 331 – 344 .
   Google Scholar
• REDDY , R. , 1988 , Correction algorithm for bore size control in finish boring operations , MSc. thesis, Department of Industrial Engineering , The University of Iowa , IA .
   Google Scholar
• SUNDARAM , R. M. , 1978 , An application of goal programming technique in metal cutting . International Journal of Production Research , 16 , 375 – 382 .
   Web of Science ®Google Scholar
• WALVEKAR , A. G. , and LAMBERT , B. K. , 1970 , An application of geometric programming to machining variable selection . International Journal of Production Research , 8 , 241 – 245 .
   Google Scholar
• YELLOWLEY , I. , and GUNN , E. A. , 1989 , The optimal subdivision of cut in multi-pass machining operations . International Journal of Production Research , 27 , 1573 – 1588 .
   Web of Science ®Google Scholar