Economic design of unit load-based FMSs employing AGVs for transport

References

• APPLE , J. M. , 1972 , Material Handling Systems Design ( New York Wiley ).
   Google Scholar
• CESARONE , J. , and EMAN , K. F. , 1989 , Mobile robot routing with dynamic programming . Journal of Manufacturing Systems , 8 ( 4 ), 257 – 266 .
   Google Scholar
• DANIELS , S. C. , 1988 , Real time conflict resolution in automated guided vehicle scheduling . PhD Thesis , Dept. of Industrial and Management Systems Engineering , The Pennsylvania State University , University Park , Pennsylvania .
   Google Scholar
• EGBELU , P. J. , 1982 , A methodology for the design of automated guided vehicle based material handling systems . PhD dissertation , Dept. of Industrial Engineering and Operations Research , Virginia Polytechnic Institute and State University , Blacksburg , Virginia .
   Google Scholar
• EGBELU , P. J. , 1986 , Unit load design for minimum cost manufacture in an automated guided vehicle based transport system . Proceedings, ULTRATECH Conference , vol. 1 , Long Beach , California , September 22-25 , pp. p3.19–3.37 p.
   Google Scholar
• EGBELU , P. J. , 1987 , Trie use of nonsimulation approaches in estimating vehicle requirements in automated guided vehicle based transport system . Material Flow , 4 ( 3,4 ), 17 – 32 .
   Google Scholar
• EGBELU , P. J. , 1990 , Route selection and flow control in a multi-stage manufacturing system with heterogeneous machines within stage . International Journal of Production Research , 28 ( 11 ), 2137 – 2155 ,
   Web of Science ®Google Scholar
• EGBELU , P. J. , 1991 , Reduction of manufacturing lead time through selection of machining rate and unit handling size . Engineering Costs and Production Economics , 21 , 21 – 34 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , 1993 , Concurrent specification of unit load sizes and automated guided vehicle fleet size in manufacturing . International Journal of Production Economics , 29 , 49 – 64 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , and ROY , N. , 1988 , Material flow control in AGV/unit load based production lines . International Journal of Production Research , 26 ( 1 ), 81 – 94 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1984 , Characterization of automated guided vehicle dispatching rules in facilities with existing layout . International Journal of Production Research , 22 ( 3 ), 359 – 374 .
   Web of Science ®Google Scholar
• EGBELU , P. J. , and TANCHOCO , J. M. A. , 1986 , Potentials for bi-directional guide-path for automatic guided vehicle based systems . International Journal of Production Research , 24 ( 5 ), 1075 – 1097 .
   Web of Science ®Google Scholar
• GASKIN , R. J. , and TANCHOCO , J. M. A. , 1987 , Flow path design for automated guided vehicle systems . International Journal of Production Research , 25 ( 5 ), 667 – 676 .
   Web of Science ®Google Scholar
• GASKIN , R. J. , TANCHOCO , J. M. A. , and TAGHABONI , F. , 1989 , Virtual flow paths for free-ranging automated guided vehicle systems . International Journal of Production Research , 27 ( 1 ), 91 – 100 .
   Google Scholar
• GOHTZ , W. G. , and EGBELU , P. J. , 1990 , Guide path design and location of load pickup/dropoff points for automated guided vehicle system . International Journal of Production Research , 28 ( 5 ), 927 – 941 .
   Google Scholar
• HODGSON , T. J. , KING , R. E. , and MONTEITH , S. K. , 1987 , Extracting heuristic control rules for AGVs using Markov decision processes . Bell Journal of Operational Research, Statistics and Computer Science , 27 ( 2 ), 3 – 17 .
   Google Scholar
• JACOBS , F. R. , and BRAGG , D. J. , 1988 , Repetitive loss flow-time reductions through sequencing and dynamic batch sizing . Decision Science , 19 , 281 – 294 .
   Web of Science ®Google Scholar
• KASPI , M. , and TANCHOCO , J. M. A. , 1990 , Optimal flow path design for unidirectional AGV systems . International Journal of Production Research , 28 ( 6 ), 1023 – 1030 .
   Web of Science ®Google Scholar
• LAW , A. M , and KELTON , W. D. , 1982 , Simulation modeling and analysis ( New York McGraw Hill ).
   Google Scholar
• MAHADEVAN , B. , and NARENDRAN , T. T. , 1990 , Design of an automated guided vehicle-based material handling system for a flexible manufacturing system . International Journal of Production Research , 28 ( 9 ), 1611 – 1622 .
   Web of Science ®Google Scholar
• MAXWELL , W. L. , and MUCKSTADT , J. A. , 1982 , Design of automatic guided vehicle systems . IIE Transactions , 14 ( 2 ), 114 – 124 .
   Web of Science ®Google Scholar
• NICELY , J. , 1986 , The estimating and justification of automatic guided vehicle systems in General motors. General Motors Corporation , Buick-Oldsmobile-Cadillac Group, paper presen¬ted at ULTRATECH Conference , Long Beach , CA , September 2-5 ,
   Google Scholar
• PHILLIPS , D. T. , 1980 , Simulation of material handling systems when and which methodology . Industrial Engineering , 12 ( 2 ), 64 – 77 .
   Google Scholar
• PRITSCHOW , G. , 1989 , Free-ranging vehicles with minimal space expense as high flexible transport system . Annals of CIRP , 38 ( 1 ), 469 – 473 .
   Google Scholar
• RUSSELL , R. , and TANCHOCO , J. M. A. , 1981 , An evaluation of vehicle dispatching rules and their effect on shop performance . Working Paper, Department of Industrial Engineering and Operations Research , Virginia Polytechnic Institute and State University , Blacksburg , VA .
   Google Scholar
• STEUDEL , H. J. , 1977 , The right pallet cuts costs . Industrial Engineering , 9 ( 2 ), 14 – 18 .
   Google Scholar
• STEUDEL , H. J. , 1982 , Determination of economic pallet size for in-plant handling . Material Flow , 1 , 71 – 76 .
   Google Scholar
• TANCHOCO , J. M. A. , and AGEE , M. H. , 1981 , Plan unit loads to interact with all components of warehouse systems . Industrial Engineering , 13 ( 6 ), 6 – 48 .
   Google Scholar
• TANCHOCO , J. M. A. , DAVIS , R. P. , and WVSK , R. A. , 1980 , Economic order quantities based on unit load and material handling considerations . Decision Sciences , 11 ( 3 ), 514 – 521 .
   Google Scholar
• TANCHOCO , J. M. A. , EGBELU , P. J. , and TAGHABONI , F. , 1987a , Determination of the total, number of vehicles in an AGV-based material transport system . Material Flow , 4 ( 3,4 ), 33 – 51 .
   Google Scholar
• TANCHOCO , J. M. A. , TAGHABONI , F. , and GASKINS , R. J. , 1987b , An intelligent real-time supervisory controller for free-ranging automated guided vehicle systems . Proceedings IXth International Conference on Production Research , vol. II , Cincinnati , Ohio , August , pp. 2167 – 2176 .
   Google Scholar
• TANCHOCO , J. M. A. , WYSK , R. A. , DAVIS , R. P. , and AGEE , M. H. , 1979 , Economic unit loads and its impact on material flow systems planning . Proceeding Fall Industrial Engineering Conference , pp. 141 – 147 .
   Google Scholar
• TRUSCOTT , W. G. , 1985 , Scheduling production activities in multi-stage batch manufacturing systems . International Journal of Production Research , 23 ( 2 ), 315 – 328 .
   Web of Science ®Google Scholar
• WALPOLE , R. E. , and MYERS , R. H. , 1985 , Probability and Statistics for Engineers and Scientists , 3rd edn. ( New York Macmillan ).
   Google Scholar
• WANG , S. T. , 1986 , An AGVs in integrated circuit packaging process . Proceedings, ULTRATECH Conference , Vol. 1 , Long Beach , CA , September 22-25 , pp. 3. 64 – 3 .79.
   Google Scholar
• WHITE , J. A. , AGEE , M. H. , and CASE , K. E. , 1977 , Principles of Engineering Economic Analysis ( New York Wiley ).
   Google Scholar
• WYSK , R. A. , EGBELU , P. J. , GOSH , B. , and ZHOU , C. , 1987 , Use of spread sheet analysis for evaluating AGV systems . Material Flow , 3,4 , 53 – 64 .
   Google Scholar