Multi-working condition performance assessment based on knowledge extraction of optimal operating states for continuous annealing processes

References

• Bao, X., Xu, J., Chen, G., Chen, X., Zhang, H., Shen, Y., & Zhai, W. (2023). Mechanism and application of an online intelligent evaluation model for energy consumption of a reheating furnace. Journal of Iron and Steel Research International, 30(1), 102–111. https://doi.org/10.1007/s42243-022-00801-8
   Web of Science ®Google Scholar
• Bonilla-Campos, I., Nieto, N., Egilegor, B., Manzanedo, J., & Gaztañaga, H. (2019). Energy efficiency assessment: Process modelling and waste heat recovery analysis. Energy Conversion and Management, 196, 1180–1192. https://doi.org/10.1016/j.enconman.2019.06.074
   Web of Science ®Google Scholar
• Chakravarty, K., & Kumar, S. (2020). Increase in energy efficiency of a steel billet reheating furnace by heat balance study and process improvement. Energy Reports, 6, 343–349. https://doi.org/10.1016/j.egyr.2020.01.014
   Web of Science ®Google Scholar
• Chang, T., & Lin, S. (1999). Grey relation analysis of carbon dioxide emissions from industrial production and energy uses in Taiwan. Journal of Environmental Management, 56(4), 247–257. https://doi.org/10.1006/jema.1999.0288
   Web of Science ®Google Scholar
• Chen, C. L. P., & Liu, Z. (2018). Broad learning system: An effective and efficient incremental learning system without the need for deep architecture. IEEE Transactions on Neural Networks and Learning Systems, 29(1), 10–24. https://doi.org/10.1109/TNNLS.2017.2716952
   PubMed Web of Science ®Google Scholar
• Chen, K., Khan, F., & Jing, X. (2018). Safety assessment of natural gas purification plant. Process Safety and Environmental Protection, 113, 459–466. https://doi.org/10.1016/j.psep.2017.11.012
   Web of Science ®Google Scholar
• Chen, X., Yang, R., Xue, Y., Huang, M., Ferrero, R., & Wang, Z. (2023). Deep transfer learning for bearing fault diagnosis: A systematic review since 2016. IEEE Transactions on Instrumentation and Measurement, 72, 1–21. https://doi.org/10.1109/TIM.2023.3244237
   PubMed Web of Science ®Google Scholar
• Dai, B., Wang, F., & Chang, Y. (2022). Multi-objective economic load dispatch method based on data mining technology for large coal-fired power plants. Control Engineering Practice, 121, 105018. https://doi.org/10.1016/j.conengprac.2021.105018
   Web of Science ®Google Scholar
• Dogan, M., & Ozkan, I. A. (2023). Determination of wheat types using optimized extreme learning machine with metaheuristic algorithms. Neural Computing and Applications, 35(17), 12565–12581. https://doi.org/10.1007/s00521-023-08354-x
   Web of Science ®Google Scholar
• Dorgo, G., Palazoglu, A., & Abonyi, J. (2021). Decision trees for informative process alarm definition and alarm-based fault classification. Process Safety and Environmental Protection, 149, 312–324. https://doi.org/10.1016/j.psep.2020.10.024
   Web of Science ®Google Scholar
• Fan, H., Feng, J., Xie, K., Bai, W., Zhao, Y., Li, W., Gao, J., Liu, C., Yan, D., & Zhao, H. (2022). Experimental study of operating parameters on the performance of a novel U-type radiant tube with dual flue gas self-circulation structures. Applied Thermal Engineering, 207, 118206. https://doi.org/10.1016/j.applthermaleng.2022.118206
   Web of Science ®Google Scholar
• Fan, H., Wu, M., Cao, W., Lai, X., Chen, L., Lu, C., Du, S., & She, J. (2021). An operating performance assessment strategy with multiple modes based on least squares support vector machines for drilling process. Computers & Industrial Engineering, 159, 107492. https://doi.org/10.1016/j.cie.2021.107492
   Web of Science ®Google Scholar
• Fan, H., Wu, M., Lai, X., Du, S., Yu, W., & Lu, C. (2022). A decentralized operating performance assessment for geological drilling process via multi-block total projection to latent structures and Bayesian inference. Journal of Process Control, 117, 26–39. https://doi.org/10.1016/j.jprocont.2022.07.005
   Web of Science ®Google Scholar
• Feng, J., & Li, K. (2020). MRS-kNN fault detection method for multirate sampling process based variable grouping threshold. Journal of Process Control, 85, 149–158. https://doi.org/10.1016/j.jprocont.2019.11.007
   Web of Science ®Google Scholar
• Gao, C., Gao, C., Song, K., Ye, Z., & Dong, J. (2019). Regional water ecosystem risk assessment based on GIS and pollutant diffusion model: A case study of Shenzhen eco-industrial park. Process Safety and Environmental Protection, 130, 182–189. https://doi.org/10.1016/j.psep.2019.08.004
   Web of Science ®Google Scholar
• Hadała, B., Malinowski, Z., & Rywotycki, M. (2017). Energy losses from the furnace chamber walls during heating and heat treatment of heavy forgings. Energy, 139, 298–314. https://doi.org/10.1016/j.energy.2017.07.121
   Web of Science ®Google Scholar
• Hajaliakbari, N., & Hassanpour, S. (2017). Analysis of thermal energy performance in continuous annealing furnace. Applied Energy, 206, 829–842. https://doi.org/10.1016/j.apenergy.2017.08.246
   Web of Science ®Google Scholar
• Ji, J., & Wang, D. (2023). Evaluation analysis and strategy selection in urban flood resilience based on EWM-TOPSIS method and graph model. Journal of Cleaner Production, 425, 138955. https://doi.org/10.1016/j.jclepro.2023.138955
   Web of Science ®Google Scholar
• Ji, Y., Gao, D., Liu, Q., Su, J., Liu, Y., Zhao, J., Yang, Y., Fu, Y., & Huang, G. (2023). An integrated framework for agricultural non-point source pollution control technology evaluation: Application of an improved multiple attribute decision making method. Expert Systems with Applications, 229, 120319. https://doi.org/10.1016/j.eswa.2023.120319
   Web of Science ®Google Scholar
• Kaya, D., Eyidogan, M., Ozkaymak, M., Turhan, F., Kilinc, E., Kayabasi, E., Sahin, Z., Sonverdi, E., & Selimli, S. (2013). Energy exergy efficiencies and environmental effects of mixed fuelled (solid+gas) industrial facility steam boiler. Journal of the Energy Institute, 86(4), 194–201. https://doi.org/10.1179/1743967113Z.00000000061
   Web of Science ®Google Scholar
• Kilinç, E., Kaya, D. A., Kílíc, F. C., Eyidoğan, M., Özkaymak, M., Taylan, O., & Pedrycz, W. (2014). An energy efficiency analysis of an industrial reheating furnace and an implementation of efficiency enhancements methods. Energy Exploration & Exploitation, 32(6), 989–1003. https://doi.org/10.1260/0144-5987.32.6.989
   Web of Science ®Google Scholar
• Kuncan, M., Kaplan, K., Minaz, M. R., Kaya, Y., & Ertunç, H. M. (2020). A novel feature extraction method for bearing fault classification with one dimensional ternary patterns. ISA Transactions, 100, 346–357. https://doi.org/10.1016/j.isatra.2019.11.006
   PubMed Web of Science ®Google Scholar
• Li, X., Liu, D., Jiao, S., & Guo, J. (2004). Intelligent PID control system for vacuum annealing furnace workpieces temperature. In Proceedings of 2004 International Conference on Machine Learning and Cybernetics.
   Google Scholar
• Li, Y., Cao, W., Hu, W., & Wu, M. (2020). Diagnosis of downhole incidents for geological drilling processes using multi-time scale feature extraction and probabilistic neural networks. Process Safety and Environmental Protection, 137, 106–115. https://doi.org/10.1016/j.psep.2020.02.014
   Web of Science ®Google Scholar
• Liu, H., Li, H., Li, H., Gao, F., Liu, G., Luo, Z., Zhang, F., Chen, S., Cao, G., Liu, Z., & Wang, G. (2015). Effects of rolling temperature on microstructure, texture, formability and magnetic properties in strip casting Fe-6.5wt% Si non-oriented electrical steel. Journal of Magnetism and Magnetic Materials, 391, 65–74. https://doi.org/10.1016/j.jmmm.2015.04.105
   Web of Science ®Google Scholar
• Liu, Y., Wang, F., & Chang, Y. (2016). Operating optimality assessment based on optimality related variations and nonoptimal cause identification for industrial processes. Journal of Process Control, 39, 11–20. https://doi.org/10.1016/j.jprocont.2015.12.008
   Web of Science ®Google Scholar
• Liu, Y., Wang, F., Chang, Y., & Ma, R. (2015). Operating optimality assessment and nonoptimal cause identification for non-Gaussian multimode processes with transitions. Chemical Engineering Science, 137, 106–118. https://doi.org/10.1016/j.ces.2015.06.016
   Web of Science ®Google Scholar
• Martineau, S., Burnham, K., Haas, O., Andrews, G., & Heeley, A. (2004). Four-term bilinear PID controller applied to an industrial furnace. Control Engineering Practice, 12(4), 457–464. https://doi.org/10.1016/S0967-0661(03)00147-3
   Web of Science ®Google Scholar
• Polat, K. (2012). Classification of Parkinson's disease using feature weighting method on the basis of fuzzy C-means clustering. International Journal of Systems Science, 43(4), 597–609. https://doi.org/10.1080/00207721.2011.581395
   Web of Science ®Google Scholar
• Rong, W., Li, B., & Qi, F. (2021). Performance evaluation of a walking beam type reheating furnace based on energy and exergy analysis. Thermal Science, 25(6 Part B), 4749–4760. https://doi.org/10.2298/TSCI200424226R
   Web of Science ®Google Scholar
• Si, M., Thompson, S., & Calder, K. (2011). Energy efficiency assessment by process heating assessment and survey tool (PHAST) and feasibility analysis of waste heat recovery in the reheat furnace at a steel company. Renewable and Sustainable Energy Reviews, 15(6), 2904–2908. https://doi.org/10.1016/j.rser.2011.02.035
   Web of Science ®Google Scholar
• Song, Q., Jiang, P., & Zheng, S. (2021). The application of cloud model combined with nonlinear fuzzy analytic hierarchy process for the safety assessment of chemical plant production process. Process Safety and Environmental Protection, 145, 12–22. https://doi.org/10.1016/j.psep.2020.07.048
   Web of Science ®Google Scholar
• Sun, Z., Wang, G., Zhai, G., Li, P., Liang, Q., & Zhang, M. (2023). Method of locating loose particles inside aerospace equipment based on parameter-optimized XGBoost. Engineering Applications of Artificial Intelligence, 126, 106796. https://doi.org/10.1016/j.engappai.2023.106796
   Web of Science ®Google Scholar
• Wang, H., Wang, X., & Wang, Z. (2022). Performance assessment method of dynamic process based on SFA-GPR. Journal of Process Control, 111, 27–34. https://doi.org/10.1016/j.jprocont.2022.01.001
   Web of Science ®Google Scholar
• Wei, H., Hu, C., Chen, S., Xue, Y., & Zhang, Q. (2019). Establishing a software defect prediction model via effective dimension reduction. Information Sciences, 477, 399–409. http://doi.org/10.1016/j.ins.2018.10.056
   Web of Science ®Google Scholar
• Wu, C., Ouyang, C., Chen, L., & Lu, L. (2015). A new fuzzy clustering validity index with a median factor for centroid-based clustering. IEEE Transactions on Fuzzy Systems, 23(3), 701–718. https://doi.org/10.1109/TFUZZ.2014.2322495
   Web of Science ®Google Scholar
• Wu, P., Wang, Z., Li, H., & Zeng, N. (2024). KD-PAR: A knowledge distillation-based pedestrian attribute recognition model with multi-label mixed feature learning network. Expert Systems with Applications, 237, 121305. https://doi.org/10.1016/j.eswa.2023.121305
   Web of Science ®Google Scholar
• Wu, P., Wang, Z., Zheng, B., Li, H., Alsaadi, F. E., & Zeng, N. (2023). AGGN: Attention-based glioma grading network with multi-scale feature extraction and multi-modal information fusion. Computers in Biology and Medicine, 152, 106457. https://doi.org/10.1016/j.compbiomed.2022.106457
   PubMed Web of Science ®Google Scholar
• Wu, R., Liu, H., & Li, J. (2023). ADCL: Adversarial distilled contrastive learning on lightweight models for self-supervised image classification. Knowledge-Based Systems, 278, 110824. https://doi.org/10.1016/j.knosys.2023.110824
   Web of Science ®Google Scholar
• Xie, T., Wang, Z., Li, H., Wu, P., Huang, H., Zhang, H., Alsaadi, F. E., & Zeng, N. (2023). Progressive attention integration-based multi-scale efficient network for medical imaging analysis with application to COVID-19 diagnosis. Computers in Biology and Medicine, 159, 106947. https://doi.org/10.1016/j.compbiomed.2023.106947
   PubMed Web of Science ®Google Scholar
• Xu, J., Gu, Y., Chen, D., & Li, Q. (2017). Data mining based plant-level load dispatching strategy for the coal-fired power plant coal-saving: A case study. Applied Thermal Engineering, 119, 553–559. https://doi.org/10.1016/j.applthermaleng.2017.03.094
   Web of Science ®Google Scholar
• Yin, S., Ding, S. X., Sari, A. H. A., & Hao, H. (2013). Data-driven monitoring for stochastic systems and its application on batch process. International Journal of Systems Science, 44(7), 1366–1376. https://doi.org/10.1080/00207721.2012.659708
   Web of Science ®Google Scholar
• Yin, S., Wang, G., & Yang, X. (2014). Robust PLS approach for KPI-related prediction and diagnosis against outliers and missing data. International Journal of Systems Science, 45(7), 1375–1382. https://doi.org/10.1080/00207721.2014.886136
   Web of Science ®Google Scholar
• Zhang, C., Peng, K., Dong, J., & Zhang, X. (2022). KPI-related operating performance assessment based on distributed ImRMR-KOCTA for hot strip mill process. Expert Systems with Applications, 209, 118273. https://doi.org/10.1016/j.eswa.2022.118273
   Web of Science ®Google Scholar
• Zhang, G., Wang, E., Zhang, C., Li, Z., & Wang, D. (2022). A comprehensive risk assessment method for coal and gas outburst in underground coal mines based on variable weight theory and uncertainty analysis. Process Safety and Environmental Protection, 167, 97–111. https://doi.org/10.1016/j.psep.2022.08.065
   Web of Science ®Google Scholar
• Zhang, H., Zhang, C., Dong, J., & Peng, K. (2022). A new key performance indicator oriented industrial process monitoring and operating performance assessment method based on improved Hessian locally linear embedding. International Journal of Systems Science, 53(16), 3538–3555. https://doi.org/10.1080/00207721.2022.2093420
   Web of Science ®Google Scholar
• Zhang, Q., Zhao, X., Lu, H., Ni, T., & Li, Y. (2017). Waste energy recovery and energy efficiency improvement in China's iron and steel industry. Applied Energy, 191, 502–520. https://doi.org/10.1016/j.apenergy.2017.01.072
   Web of Science ®Google Scholar
• Zhao, J., Ma, L., Zayed, M. E., Elsheikh, A. H., Li, W., Yan, Q., & Wang, J. (2021). Industrial reheating furnaces: A review of energy efficiency assessments, waste heat recovery potentials, heating process characteristics and perspectives for steel industry. Process Safety and Environmental Protection, 147, 1209–1228. https://doi.org/10.1016/j.psep.2021.01.045
   Web of Science ®Google Scholar