REFERENCES
- Gerberich, W. W. and Cordill, M. J., Rep. Prog. Phys. 69, 2157–2203. (2006).
- Landman, U., Luedtke, W. D., Burnham, N. A. and Colton, R. J., Science. 248 (4954), 454–461 (1990).
- Mróz, Z. and Stupkiewicz, S., Int. J. Mech. Sci. 40 (2–3), 281–303 (1998).
- Comyn, J., Adhesion Science, ( Royal Society of Chemistry Paperbacks, Cambridge, 1997).
- Israelachvili, J. N., Intermolecular and Surface Forces. 2nd edn., (Academic Press, Waltham, 1991).
- Allix, O. and Ladeveze, P., Compos. Struct. 22, 235–242 (1992).
- Point, N. and Sacco, E., Int. J. Solids Struct. 33 (4), 483–509 (1996).
- Hendrickx, J. M., Geubelle, P. H., and Sottos, N. R., Eng. Frac. Mech. 72 (12), 1866–1891 (2005).
- Roy, S., Darque-Ceretti, E., Felder, E., and Monchoix, H., Int. J. Fract. 144, 21–33 (2007).
- Kendall, K., J. Phys. D: Appl. Phys. 8, 1449–1452 (1975).
- Johnson, K. L., Kendall, K., and Roberts, A. D., Proc. R. Soc. Lond. A 324, 301–313 (1971).
- Orr, F. M., Scriven, L. E., and Rivas, A. P., J. Fluid. Meth. 67 (4), 723–742 (1975).
- Kendall, K., Amal, R., Jiang, X., and Yu, A., J. Adhes. 83, 573–585.
- Liu, G., Li, S., and Yao, Q., Front. Energy Power Eng. China 4 (2), 280–286 (2010).
- Li, S., Marshall, J. S., Liu, G., and Yao, Q., Prog. Ener. Combust. Sci. 37, 633–668 2011.
- Persson, B. N. J., Albohr, O., Tartaglino, U., Volokitin, A. I., and Tosatti, E., J. Phys. Condens. Matter. 17 (3), R1–R62 (2005).
- Hunter, R., Ibacache, N., Moller, J., Betancourt, R., Mora, T., Diez, E., and Pavez, B., J. Adhes. 88 (4–6), 376–390 (2012).
- Sauer, R. A., Comp. Meth. Biomech. Biomed. Engng. 12 (6), 627–640 (2009).
- Sauer, R. A., J. Adhes. Sci. Technol. 28 (3–4), 240–255 (2014).
- Eid, H., Adams, G. G., McGruer, N. E., Fortini, A., Buldyrev, S., Srolovitz, D., Tribol. Trans. 54, 920–928 (2011).
- Banea, M. D., da Silva, L. F. M., P. I. Mech. Eng. L J. Mat. 223 (L1), 1–18 (2009).
- He, X., Int. J. Adhes. Adhes. 31, 248–264 (2011).
- Komvopoulos, K., J. Adhes. Sci. Tech. 17 (4), 477–517 (2003).
- Zhao, Y. P., Wang, L. S., and Yu, T. X., J. Adhes. Sci. Technol. 17 (4), 519–546 (2003).
- Autumn, K. and Peattie, A. M., Integr. Comp. Biol. 42, 1081–1090 (2002).
- Arzt, E., Gorb, S., and Spolenak, R., Proc. Natl. Acad. Sci. USA 100 (19), 10603–10606 (2003).
- Spenko, M. J., Haynes, G. C., Saunders, J. A., Cutkosky, M. R., Rizzi, A. A., Full, R. J., and Koditschek, D. E., J. Field Rob. 25 (4–5), 223–242 (2008).
- Yurdumakan, B., Raravikar, N. R., Ajayan, P. M., and Dhinojwala, A., Chem. Commun. 30, 3799–3801 (2005)
- Aksak, B., Murphy, M. P., and Sitti, M., Langmuir 23, 3322–3332 (2007).
- Ge, L., Sethi, S., Ci, L., Ajayan, P. M., and Dhinojwala, A., Proc. Natl. Acad. Sci. USA 104 (26), 10792–10795 (2007).
- Kim, D. S., Lee, H. S., Lee, J., Kim, S., Lee, K. H., Moon, W., Kwon, T. H., Microsyst. Technol. 13, 601–606 (2007).
- Schubert, B., Majidi, C., Groff, R. E., Baek, S., Bush, B., Maboudian, R., and Fearing, R. S., J. Adhes. Sci. Technol. 21 (12–13), 1297–1315 (2007).
- Qu, L., Dai, L., Stone, M., Xia, Z., and Wang, Z. L., Science 322, 238–242 (2008).
- Ghatak, A., Mahadevan, L., Chung, J. Y., Chaudhury, M. K., and Shenoy, V., Proc. R. Soc. Lond. A 460, 2725–2735 (2004).
- Gorb, S., Varenberg, M., Peressadko, A., and Tuma, J., J. R. Soc. Interface 4, 271–275 (2007).
- Blossey, R., Nat. Mater. 2, 301–306 (2003).
- Tsang, P. H., Li, G., Brun, Y. V., Freund, L. B., and Tang, J. X., Proc. Natl. Acad. Sci. 103, 5764–5768 (2006).
- Lipowsky, R. and Seifert, U., Langmuir. 7, 1867–1873 (1991).
- Andrews, K. T., Chapman, L., Fernandez, J. R., Fisackerly, M., Shillor, M., Vanerian, L., and VanHouten, T., SIAM J. Appl. Math. 64 (1), 152–169 (2003).
- Wan, K. T., and Julien, S. E., J. Appl. Mech. 76 (5), 051 (2009).
- Agrawal, A., Math. Mech. Solids. 16 (8), 872–886 (2011).
- Zhu, C., J. Biomech. 33, 23–33 (2000).
- Wang, W., King, M. R., Ann. Biomed. Eng. 40 (11), 2345–2354 (2012).
- Holzapfel, G. A., Nonlinear Solid Mechanics: A Continuum Approach for Engineering, (Wiley, Hoboken, 2000).
- Wriggers, P., Nonlinear Finite Element Methods, (Springer, Berlin, 2008).
- Zienkiewicz, O. C., Taylor, R. L., and Zhu, J. Z., The Finite Element Method: Its basis and fundamentals. 6th edn., (Butterworth-Heinemann, Oxford, 2005).
- Zienkiewicz, O. C., and Taylor, R. L., The Finite Element Method for Solid and Structural Mechanics. 6th edn., (Butterworth-Heinemann, Oxford, 2005).
- Belytschko, T., Liu, W. K., and Moran, B., Nonlinear Finite Elements for Continua and Structures, (Wiley, Hoboken, 2000).
- Cottrell, J. A., Hughes, T. J. R., and Bazilevs, Y., Isogeometric Analysis, (Wiley, Hoboken, 2009).
- Borden, M. J., Scott, M. A., Evans, J. A., and Hughes, T. J. R., Int. J. Numer. Meth. Eng. 87, 15–47 (2011).
- Scott, M. A., Borden, M. J., Verhoosel, C. V., Sederberg, T. W., and Hughes, T. J. R., Int. J. Numer. Meth. Eng. 88 (2), 126–156 (2011).
- Timoshenko, S. P., and Goodier, J. N., Theory of Elasticity 3rd edn., (McGraw-Hill, New York, 1970).
- Ogden, R. W., Non-Linear Elastic Deformations, (Dover, Mineola, 1987).
- Anderson, G. P., DeVries, K. L., and Williams, M. L., Int. J. Fract. 9 (4), 421–436 (1973).
- Adams, R. D. and Peppiatt, N. A., J. Strain Anal. 9 (3), 185–196 (1974).
- Wu, G. and Crocombe, A. D., Comput. Struct. 61 (2), 385–391 (1996).
- Destuynder, P., Michavila, F., Santos, A., and Ousset, Y., Int. J. Numer. Meth. Eng. 35, 1237–1262 (1992).
- Zhao, X., Adams, R. D., and da Silva, L. F. M., J. Adhes. Sci. Technol. 25 (8), 819–836 (2011).
- Zhao, X., Adams, R. D., and da Silva, L. F. M., J. Adhes. Sci. Technol. 25 (8), 837–856 (2011).
- Crocombe, A. D. and Adams, R. D., J. Adhesion 12, 127–139 (1981).
- Apalak, M. K. and Engin, A., J. Adhes. Sci. Technol. 11 (9), 1153–1195 (1997).
- Andruet, R. H., Dillard, D. A., and Holzer, S. M., Int. J. Adhes. Adhes. 21, 17–34 (2001).
- Lubowiecka, I., Rodriguez, M., Rodriguez, E., and Martinez, D., Int. J. Adhes. Adhes. 37, 56–64 (2012).
- Salgado, N. K. and Aliabadi, M. H., Int. J. Numer. Meth. Eng. 42 (2), 195–217 (1998).
- Sancaktar, E., Constitutive adhesive and sealant models. In: Handbook of Adhesion Technology, da Silva, L. F. M. Öchsner, A., and Adams, R. D., (Eds.), (Springer, Berlin, 2011), pp. 553–595.
- Dillard, D. A., Physical properties of adhesives. Handbook of Adhesion Technology, da Silva, L. F. M., Öchsner, A., and Adams, R. D., (Eds.), (Springer, Berlin, 2011), pp. 393–414.
- Yadagiri, S., Reddy, C. P., and Reddy, T. S., Comput. Struct. 27 (4), 445–454 (1987).
- Carpenter, W. C., Comput. Struct. 36 (6), 1141–1152 (1990).
- Lin, Y. Y., Hui, C. Y., and Wang, Y. C., J. Polym. Sci. B Poly. Phys. 40 (19), 2277–2291 (2002).
- Sauer, R. A., J. Adhes. Sci. Technol. 24, 1807–1818 (2010).
- Tang, M. and Soh, A., Key Eng. Mater. 462–463. In: Ariffin, A., Abdullah, S., Ali, A., Muchtar, A., Ghazali, M., and Sajuri, Z., (Eds.),(Trans Tech Publications, Duernten, 2011), pp. 780–784.
- Simo, J. C. and Hughes, T. J. R., Computational Inelasticity, (Springer, 1998).
- Edlund, U. and Klarbring, A., Comput. Meth. Appl. Mech. Eng. 78, 19–47 (1990).
- Edlund, U. and Klarbring, A., Comput. Meth. Appl. Mech. Eng. 96, 329–350 (1992).
- Edlund, U. and Klarbring, A., Int. J. Solids Struct. 30 (19), 2693–2708 (1993).
- Edlund, U., Comput. Meth. Appl. Mech. Eng. 115, 253–276 (1994).
- Schmidt, P. and Edlund, U., Int. J. Numer. Meth. Eng. 66, 1271–1308 (2006).
- Klarbring, A., Int. J. Eng. Sci. 29 (4), 493–512 (1991).
- Klarbring, A., Movchan, A. B., Mech. Mater. 28, 137–145 (1998).
- Schmidt, P. and Edlund, U., Int. J. Adhes. Adhes. 30, 665–681 (2010).
- Cui, J., Wang, R., Sinclair, A. N., and Spelt, J. K., Int. J. Adhes. Adhes. 23, 199–206 (2003).
- Créac’hcadec, R., Cognard, J. Y., and Heuze, T., J. Adhes. Sci. Tech. 22, 1541–1563 (2008).
- Créac’hcadec, R., and Cognard, J. Y., J. Adhes. 85 (4–5), 239–260 (2009).
- Martiny, P., Lani, F., Kinloch, A. J., and Pardoen, T., Int J. Adhes. Adhes. 28, 222–236 (2008).
- Moës, N., Dolbow, J., and Belytschko, T., Int. J. Numer. Meth. Eng. 46, 131–150 (1999).
- Belytschko, T., Gracie, R., and Ventura, G., Model. Simul. Mater. Sci. Eng. 17, 043001 (2009).
- Fries, T. P., and Belytschko, T., Int. J. Numer. Mech. Eng. 84, 253–304 (2010).
- Campilho, R. D. S. G., Banea, M. D., Pinto, A. M. G., da Silva, L. F. M., and de Jesus, A. M. P., Int. J. Adhes. Adhes. 31 (5), 363–372 (2011).
- Comyn, J., Thermal properties of adhesives. In: Handbook of Adhesion Technology, da Silva, L. F. M., Öchsner, A., Adams, R. D., (Eds.), (Springer, Berlin, 2011), pp. 415–442.
- White, S. R. and Hahn, H. T., J. Compos. Mater. 26 (16), 2402–2422 (1992).
- Adolf, D. and Martin, J. E., J. Compos. Mater. 30, 13–34 (1996).
- Lion, A., and Hofer, P., Arch. Mech. 59 (1), 59–89 (2007).
- Hossain, M., Possart, G., and Steinmann, P., Comput. Mech. 44 (5),621–630 (2009).
- Hossain, M., Possart, G., and Steinmann, P., Comput. Mech. 46, 363–375 (2010).
- Mergheim, J., Possart, G., and Steinmann, P., Comp. Mat. Sci. 53 (1),359–367 (2012).
- André, M. and Wriggers, P., Int. J. Solids Struct. 42, 4758–4778 (2005).
- Yu, H., Adams, R. D., and da Silva, L. F. M., Int. J. Adhes. Adhes. 47, 26–34 (2013).
- Loh, W. K., Crocombe, A. D., Wahab, M. A., and Ashcroft, I. A., J. Adhes. 79, 1135–1160 (2003).
- Liljedahl, C. D. M., Crocombe, A. D., Wahab, M. A., and Ashcroft, I. A., J. Adhes. Sci. Technol. 19 (7), 525–547 (2005).
- Ashcroft, I. A. and Comyn, J., Effect of water and mechanical stress on durability. In: Handbook of Adhesion Technology, da Silva, L. F. M., Öchsner, A., and Adams, R. D., (Eds.), (Springer, Berlin, 2011), pp. 789–822.
- Comyn, J., Diffusion of water in adhesives. In: Design of Adhesive Joints Under Humid Conditions, da Silva, L. F. M. Sato, C., (Eds.), (Springer, Berlin, 2013), pp. 1–19.
- Ashcroft, I. A. and Crocombe, A. D., Prediction of joint strength under humid conditions: Damage mechanics approach. In: Design ofAdhe-sive Joints Under Humid Conditions, da Silva, L. F. M., Sato, C., (Eds.), (Springer, Berlin, 2013) pp. 123–146.
- Crocombe, A. D. and Ashcroft, I. A., Prediction of joint strength under humid conditions with cyclic loading. In: Design ofAdhesive Joints Under Humid Conditions, da Silva, L. F. M., Sato, C., (Eds.), (Springer, Berlin, 2013), pp. 147–182.
- Suresh, S., Fatigue of Materials, (Cambridge University Press, Cambridge, 1998).
- Ashcroft, I. A., Fatigue load conditions. In: Handbook of Adhesion Technology, da Silva, L. F. M., Öchsner, A., Adams, R. D., (Eds.), (Springer, Berlin, 2011), pp. 845–874.
- Sauer, R. A., A contact theory for surface tension driven systems. Math. Mech. Solids, (2014) published online, doi:10.1177/1081286514521230.
- Padday, J. F., Proc. Roy. Soc. A. 269 (1197), 265–293 (1971).
- Brown, R. A., Orr, F. M., and Scriven, L. E., J. Colloid Interface Sci. 73 (1), 76–87 (1980).
- Brakke, K. A., Exp. Math. 1 (2), 141–165 (1992).
- Iliev, S. D., Comput. Methods Appl. Mech. Eng. 126, 251–265 (1995).
- Sauer, R. A., Int. J. Numer. Meth. Fluids 75 (7), 519–545 (2014).
- Pakarinen, O. H., Foster, A. S., Paajanen, M., Kalinainen, T., Katainen, J., Makkonen, I., Lahtinen, J., and Nieminen, R. M., Model. Simul. Mater. Sci. Eng. 13, 1175–1186 (2005).
- Cai, S., and Bhushan, B., Mat. Sci. Eng. R. 61 (1–6), 78–106 (2008).
- Zmitrowicz, A., Arch. Appl. Mech. 80 (12), 1407–1428 (2010).
- Laursen, T. A., Computational Contact and Impact Mechanics: Fundamentals of modeling interfacial phenomena in nonlinear finite element analysis, (Springer, Berlin, 2002).
- Wriggers, P., Computational Contact Mechanics. 2nd edn., (Springer, Berlin, 2006).
- Tvergaard, V. and Hutchinson, J. W., J. Mech. Phys. Solids. 40, 1377–1397 (1992).
- Xu, X. P. and Needleman, A., Model. Simul. Mater. Sci. Eng. 1 (2),111–132 (1993).
- Sauer, R. A. and Wriggers, P., Comput. Methods Appl. Mech. Eng. 198, 3871–3883 (2009).
- Sauer, R. A. and Li, S., Int. J. Numer. Meth. Eng. 71 (8), 931–962 (2007).
- Gross, D. and Seelig, T., Fracture Mechanics, (Springer, Berlin, 2006).
- Nesemann, L. and Stephan, E. P., Appl. Numer. Math. 62 (5), 606–619 (2012).
- Sauer, R. A. and De -Lorenzis, L., Comput. Methods Appl. Mech. Eng. 253, 369–395 (2013).
- Yao, H. and Gao, H., J. Mech. Phys. Solids 54, 1120–1146 (2006).
- Sauer, R. A., “An atomic interaction based continuum model for computational multiscale contact mechanics,” Ph.D. Thesis, University of California, Berkeley, USA (2006).
- Sauer, R. A., Challenges in computational nanoscale contact mechanics. In: Recent Developments and Innovative Applications in Computational Mechanics, Müller-Hoeppe, D., Löhnert, S., and Reese, S., (Eds.), (Springer, Berlin, 2011), pp. 39–46.
- Guduru, P. R., J. Mech. Phys. Solids 55, 445–472 (2007).
- Kesari, H. and Lew, A. J., J. Mech. Phys. Solids 59, 2488–2510 (2011).
- Crisfield, M. A. and Alfano, G., Int. J. Numer. Meth. Eng. 54 (9), 1369–1390 (2002).
- Sauer, R. A., Int. J. Numer. Meth. Eng. 87, 593–616 (2011).
- Guiamatsia, I., Ankersen, J. K., Davies, G. A. O., and Iannucci, L., Compos. Sci. Technol. 69 (15–16), 2616–2624 (2009).
- Samimi, M., van Dommelen, J. A. W., and Geers, M. G. D., Int. J. Numer. Meth. Eng. 80 (5), 609–630 (2009).
- Sauer, R. A., Comput. Mech. 52 (2), 301–319 (2013).
- Corbett, C. J. and Sauer, R. A., Comput. Methods Appl. Mech. Eng. 275, 55–75 (2014).
- Corbett, C. J. and Sauer, R. A., Comput. Methods Appl. Mech. Eng. 284, 781–806 (2015).
- Stapleton, S., Pineda, E. J., Gries, T., and Waas, A. M., Int. J. Solids Struct. 51, 3252–3264 (2014).
- Johnson, K. L., Contact Mechanics, (Cambridge University Press, Cambridge, 1985).
- Yongsheng, L., Yuanzhong, H., and Linqing, Z., Trans. ASME. 121, 128, (1999).
- Yong, C. W., Kendall, K., and Smith, W., Phil. Trans. R. Soc. Lond. A. 362, 1915–1929 (2004).
- Luan, B. and Robbins, M. O., Phys. Rev. E. 74 (2), 026–111 (2006).
- Yang, C., Tartaglino, U., and Persson, B. N. J., Eur. Phys. J. D. 19 (1),47–58 (2006).
- Gilabert, F. A., Quintanilla, M. A. S., Castellanos, A., and Valverde, J. M., Zeitschrift fur Angewandte Mathematik und Mechanik. 87 (2), 128–138.
- Sauer, R. A. and Li, S., J. Nanosci. Nanotech. 8 (7), 3757–3773 (2008).
- Peri, M. D. M. and Cetinkaya, C., J. Adhes. Sci. Tech. 23 (13–14), 1723–1738 (2009).
- Schmidt, M. G., Sauer, R. A., and Ismail, A. E., Model. Simul. Mater. Sci. Eng. 22, 045–012 (2014).
- Sauer, R. A. and Holl, M., Comp. Meth. Biomech. Biomed. Eng. 16 (6),577–591 (2013).
- Camacho, G. T. and Ortiz, M., Int. J. Solids Struct. 33, 2899–2938 (1996).
- Ortiz, M. and Pandolfi, A., Int. J. Numer. Meth. Eng. 44, 1267–1282 (1999).
- Raous, M., Cangemi, L., and Cocu, M., Comput. Methods Appl. Mech. Eng. 177, 383–399 (1999).
- Roe, K. L. and Siegmund, T., Eng. Frac. Mech. 70 (2), 209–232 (2003).
- Feng, X. Q., Li, H., Zhao, H. P., and Yu, S. W., Powder Tech. 189 (1),34–41 (2009).
- Del -Piero, G. and Raous, M., Eur. J. Mech. A Solid. 29, 496–507 (2010).
- Fremond, M., Contact with adhesion. In: Nonsmooth Mechanics and Applications, Moreau, J. J., and Panagiotopoulos, P. D., (Eds.), (Springer,1988), pp. 177–221.
- Elmukashfi, E. and Kroon, M., Eng. Frac. Mech. 124–125, 1–17 (2014).
- Tvergaard, V., Mater. Sci. Eng. 125, 203–213 (1990).
- van -den Bosch, M. J., Schreurs, P. J. G., and Geers, M. G. D., Eng. Fract. Mech. 73, 1220–1234 (2006).
- Eligehausen, R., Popov, E. P., and Bertéro, V. V., Local bond stress-slip relationships of deformed bars under generalized excitations, Report No. UCB/EERC-83/23, University of California, Berkeley (1983).
- Liu, P. F. and Zheng, J. Y., Mater. Des. 31 (8), 3825–3834 (2010).
- Sørensen, B., Acta Mater. 50, 1053–1061 (2002).
- Andersson, T. and Stigh, U., Int. J. Solids Struct. 41, 413–434 (2004).
- Andersson, T. and Biel, A., Int. J. Frac. 141, 227–246 (2006).
- Leffler, K., Alfredsson, K. S., and Stigh, U., Int J. Solids Struct. 44, 530–545 (2007).
- Ouyang, Z. and Li, G., Int. J. Solids Struct. 46, 2656–2668 (2009).
- Ji, G., Ouyang, Z., and Li, G., Int. J. Fract. 168, 197–207 (2011).
- de Moura, M. F. S. F., Goncalves, J. P. M., and Magallmes, A. G., Int. J. Adhes. Adhes. 39, 54–59 (2012).
- Fernandes, R. M. R. P., Chousal, J. A. G., de Moura, M. F. S. F., and Xavier, J., Compos. B. 52, 269–274 (2013).
- Fogelson, A. L., J. Comput. Phys. 56, 111–134 (1984).
- Wei, Y., and Hutchinson, J. W., Int. J. Fract. 93, 315–333 (1998).
- Yang, Q. D., Thouless, M. D., and Ward, S. M., J. Mech. Phys. Solids. 47 (6), 1337–1353 (1999).
- Kaziolas, D. N., Kontoleon, M. J., Koltsakis, E. K., and Panagiotopoulos, P. D., Comput. Meth. Appl. Mech. Eng. 186 (1), 23–48 (2000).
- Rahulkumar, P., Jagota, A., Bennison, S. J., and Saigal, S., Int. J. Solids Struct. 37 (13), 1873–1897 (2000).
- Borg, R., Nilsson, L., and Simonsson, K., Compos. Sci. Technol. 62 (1011), 1299–1314 (2002).
- Talon, C. and Curnier, A., Eur. J. Mech. A. 22, 545–565 (2003).
- Li, Q. Y. and Yu, S. W., Acta Mech. Sin. 20 (2), 165–171 (2004).
- Su, C., Wei, Y. J., and Anand, L., Int. J. Plast. 20 (12), 2063–2081 (2004).
- Tran, P., Kandula, S. S. V., Geubelle, P. H., and Sottos, N. R., Eng. Frac. Mech. 75 (14), 4217–4233 (2008).
- McGarry, J. P., Murphy, B. P., and McHugh, P. E., J. Mech. Phys. Solids 53, 2597–2637 (2005).
- Armstrong, N. J., Painter, K. J., and Sherratt, J. A., J. Theor. Biol. 243, 98–113 (2006).
- Kočvara, M., Mielke, A., and Roubicek, T., Math. Mech. Solids 11 (4),423–447 (2006).
- Li, S., Thouless, M. D., Waas, A. M., Schroeder, J. A., and Zavattieri, P. D., Eng. Frac. Mech. 73 (1), 64–78 (2006).
- Carpinteri, A., Paggi, M., and Zavarise, G., Int. J. Solids Struct. 45, 129–143 (2008).
- Gruttmann, F. and Pham, V. D., Comp. Mech. 41 (3), 361–370 (2008).
- Matous, K., Kulkarni, M. G., and Geubelle, P. H., J. Mech. Phys. Solids. 56 (4), 1511–1533 (2008).
- Luding, S., Granular Matt. 10 (4), 235–246 (2008).
- Lorentz, E., Comput. Methods Appl. Mech. Eng. 198, 302–317 (2008).
- De -Lorenzis, L. and Zavarise, G., Int. J. Solids Struct. 45, 5419–5436.
- Zhang, C. Z. and Wang, Z. G., Phys. Rev. E 7, 021–906 (2008).
- Zhang, J., Das, S., and Du, Q., J. Comp. Phys. 228, 7837–7849 (2009).
- Zhang, J., Zhao, Z., and Wei, X., A damage cohesive model for simulating 90° peel propagation in anisotropic conductive bonding. In: Advanced Materials Research, vol. 139–141, Zhang, L. C., Zhang, C. L., and Shi, T. L., (Eds.), Duerten, (2010), pp. 374–377.
- Lin, Y. Y. and Wu, M. H., J. Adhes. 88, 86–107 (2012).
- Bambach, M., Pietryga, M., Mikloweit, A., and Hirt, G., J. Mater. Proces. Technol. 214, 2156–2168 (2014).
- Vossen, B. G., Schreurs, P. J. G., van -der Sluis, O., and Geers, M. G. D., J. Mech. Phys. Solids 66, 117–132 (2014).
- Verhoosel, C. V., Scott, M. A., de Borst, R., and Hughes, T. J. R., Int. J. Numer. Meth. Eng. 87 (1–5), 336–360 (2011).
- Dimitri, R., Lorenzis, L. D., Wriggers, P., and Zavarise, G., Comput. Mech. 54 (2), 369–388 (2014).
- Gautam, S. S. and Sauer, R. A., Int. J. Numer. Meth. Eng. 93 (10),1057–1081 (2013).
- Gautam, S. S. and Sauer, R. A., Int. J. Comput. Methods. 11 (5), 1350 104 (2014).
- Point, N. and Sacco, E., Int. J. Frac. 79 (3), 225–247 (1996).
- Rojek, J. and Telega, J. J., J. Theor. Appl. Mech. 37 (3), 659–686 (1999).
- Rojek, J. and Telega, J. J., J. Theor. Appl. Mech. 39 (3), 555–577 (2001).
- Rojek, J., Telega, J. J., and Stupkiewicz, S., J. Theor. Appl. Mech. 39 (3), 679–706 (2001).
- Han, W., Kuttler, K. L., Shillor, M., and Sofonea, M., Int. J. Solids Struct. 39, 1145–1164 (2002).
- Chau, O., Fernández, J. R., Shillor, M., and Sofonea, M., J. Comput. Appl. Math. 159, 431–465 (2003).
- Fernández, J. R., Shillor, M., and Sofonea, M., Math. Comput. Model. 37, 1317–1333 (2003).
- Cocou, M., Schryve, M., and Raous, M., Z. Angew. Math. Phys. 61, 721–743 (2010).
- Ahn, J., ESAIM, Math. Model. Numer. Anal. 42 (6), 1021–1045 (2008).
- Wriggers, P., and Reinelt, J., Comput. Methods Appl. Mech. Eng. 198 (21–26), 1996–2008 (2009).
- Cocou, M. and Rocca, R., Math. Model. Numer. Anal. 34 (5), 981–1001 (2000).
- Sofonea, M., Han, W., and Shillor, M., Analysis and Approximation of Contact Problems with Adhesion and Damage, (Chapman & Hall/CRC, Boca, Raton, 2006).
- Sofonea, M., Arhab, R., and Tarraf, R., J. Appl. Math. 2006, 1–25 (2006).
- Touzaline, A., Appl. Math. Mech. Engl. Ed. 31 (5), 623–634 (2010).
- Bonetti, E., Bonfanti, G., and Rossi, R., Math. Meth. Appl. Sci. 31, 1029–1064 (2008).
- Bonetti, E., Bonfanti, G., and Rossi, R., Nonlinearity 22, 2697–2731 (2009).
- Bonetti, E., Bonfanti, G., and Rossi, R., J. Differ. Equ. 253, 438–462 (2012).
- Diehl, T., Int. J. Adhes. Adhes. 28, 237–255 (2008).
- Lane, M., Annu. Rev. Mater. Res. 33, 29–54 (2003).
- Quesnel, D. J. and Rimai, D. S., J. Adhes. 74 (1–4), 177–194 (2000).
- Nadler, B. and Tang, T., Int. J. Non-lin. Mech. 43, 716–721 (2008).
- Long, R., Shull, K. R., and Hui, C. Y., J. Mech. Phys. Solids. 58 (9), 1225–1242 (2010).
- Long, R. and Hui, C. Y., Int. J. Solids Struct. 49, 672–683 (2012).
- Carbone, G., Scaraggi, M., and Tartaglino, U., Eur. Phys. J. E. 30 (1),65–74 (2009).
- Gu, R., Wang, X., and Gunzburger, M., J. Comp. Phys. 275, 626–641 (2014).
- Bradley, R. S., Phil. Mag. 13, 853–862 (1932).
- Hamaker, H. C., Physica 4 (10), 1058–1072 (1937).
- Tadmor, R., J. Phys. Condens. Matter. 13, L195–L202 (2001).
- Argento, C., Jagota, A., and Carter, W. C., J. Mech. Phys. Solids. 45 (7),1161–1183 (1997).
- Li, F., Pan, J., and Sinka, C., Mech. Mater. 43, 157–167 (2011).
- Tworzydlo, W. W., Cecot, W., Oden, J. T., and Yew, C. H., Wear. 220 (2), 113–140 (1998).
- Suh, A. Y., Yu, N., Lee, K. M., Polycarpou, A. A., and Johnson, H. T., J. Appl. Phys. 96 (3), 1348–1359 (2004).
- Liu, T., Liu, G., Xie, Q., and Wang, Q. J., J. Tribol. T. ASME. 128 (1),40–48 (2006).
- Du, Y., Chen, L., McGruer, N. E., Adams, G. G., and Etsion, I., J. Colloid Interf. Sci. 312 (2), 522–528 (2007).
- Sauer, R. A., Li, S., Finite Elem. Anal. Des. 43 (5), 384–396 (2007).
- Kadin, Y., Kligerman, Y., and Etsion, I., J. Colloid Interface Sci. 321, 242–250 (2008).
- Radhakrishnan, H. and Mesarovic, S. D., Proc. Roy. Soc. A. 465, 2231–2249 (2009).
- Ardito, R., Corigliano, A., and Frangi, A., Me c. Ind. 11 (3–4), 177–182.
- Eid, H., Joshi, N., McGruer, N. E., and Adams, G. G., J. Tribol. 133, 031–406 (2011).
- Zhang, X., Zhang, X., and Wen, S., Tribol. Lett. 41, 65–72 (2011).
- Jin, C., Jagota, A., and Hui, C. Y., J. Phys. D: Appl. Phys. 44, 405–303.
- Ono, K., J. Tribol. 134 (1), 011–402 (2012).
- Derjaguin, B. V., Kolloid Z. 69, 155–164 (1934).
- Cho, S. S. and Park, S., Tribol. Int. 37, 763–769 (2005).
- Bobji, M. S., Xavier, S., Jayadeep, U. B., and Jog, C. S., Tribol. Lett. 39, 201–209 (2010).
- Jayadeep, U. B., Bobji, M. S., and Jog, C. S., Eur. J. Mech. A/Solids. 45, 20–31 (2014).
- Jayadeep, U. B., Bobji, M. S., and Jog, C. S., Tribol. Lett. 53, 79–89 (2014).
- Zeng, X. and Li, S., Comp. Meth. Biomech. Biomed. Eng. 14 (5), 447–458 (2011).
- Sauer, R. A. and Mergel, J. C., Finite Elem. Anal. Des. 86, 120–135 (2014).
- Namilae, S., and Chandra, N., J. Eng. Mater. Technol. 127, 222–232 (2005).
- Yamakov, V., Saether, E., Phillips, D. R., and Glaessgen, E. H., J. Mech. Phys. Solids. 54, 1899–1928 (2006).
- Zhou, X. W., Moody, N. R., Jones, R. E., Zimmerman, J. A., and Reedy, E. D., Acta Mater. 57, 4671–4686 (2009).
- Dandekar, C. R. and Shin, Y. C., Compos. A 42, 355–363 (2011).
- Krull, H. and Yuan, H., Eng. Frac. Mech. 78, 525–533 (2011).
- Paggi, M. and Wriggers, P., Comput. Mater. Sci. 50, 1625–1633 (2011).
- He, M. and Li, S., Comput. Mech. 49, 337–355 (2012).
- Paliwal, B. and Cherkaoui, M., Int. J. Solids Struct. 50, 3346–3360 (2013).
- Shavezipur, M., Li, G. H., Laboriante, I., Gou, W. J., Carraro, C., and Maboudian, R., J. Micromech. Microeng. 21, 115–025 (2011).
- Weissenfels, C., “Contact methods integrating plasticity models with application to soil mechanics,” Ph.D. Thesis, Leibniz University Hannover, Hannover, Germany (2013).
- Bell, G. I., Science. 200, 618–627 (1978).
- Bell, G. I., Dembo, M., and Bongrand, P., Biophys. J. 45, 1051–1064 (1984).
- Tozeren, A., Sung, K. L. P., and Chien, S., Biophys. J. 55, 479–487 (1989).
- Agresar, G., “A computational environment for the study of circulating cell mechanics and adhesion,” Ph.D. Thesis, University of Michigan, Ann Arbor, USA (1996).
- N’Dri, N. A., Shyy, W., and Tran-Son-Tay, R., Biophys. J. 85, 2273–2286 (2003).
- Lin, Y. and Freund, L. B., Int. J. Solids Struct. 44, 1927–1938 (2007).
- Liu, P., Zhang, J. W., Cheng, Q. H., and Lu, C., J. Mech. Phys. Solids. 55, 1166–1181 (2007).
- Pathak, A., Deshpande, V. S., McMeeking, R. M., and Evans, A. G., J. R. Soc. Interface. 5, 507–524 (2008).
- Zhang, C. Y. and Zhang, Y. W., Phys. Rev. E. 77, 021–912 (2008).
- Wong, H. C. and Tang, W. C., J. Biomech. 44 (6), 1046–1050 (2011).
- Farsad, M. and Vernerey, F. J., Int. J. Numer. Meth. Eng. 92 (3), 238–267 (2012).
- Wei, Y., J. Mech. Phys. Solids, 70, 227–241 (2014).
- Sanz-Herrera, J. A. and Reina-Romo, E., Int. J. Molec. Sci. 12 (11),8217–8244 (2011).
- Derjaguin, B. V., Muller, V. M., and Toporov, Y. P., J. Colloid Interface Sci. 53 (2), 314–326 (1975).
- Maugis, D., J. Colloid Interface Sci. 150 (1), 243–269 (1992).
- Sauer, R. A., A computational contact model for nanoscale rubber adhesion. In: Constitutive Models for Rubber VI, Heinrich, G. Kaliske, M. Lion, A., and Reese, S., (Eds.), (Taylor & Francis Group, 2009), pp. 47–52.
- Muller, V. M., Yushchenko, V. S., and Derjaguin, B. V., J. Colloid Interface Sci. 77, 91–101 (1980).
- Attard, P. and Parker, J. L., Phys. Rev. A. 46, 7959–7971 (1992).
- Greenwood, J. A., Proc. R. Soc. Lond. A. 453, 1277–1297 (1997).
- Feng, J. Q., Colloid Surf. A. 172 (1–2), 175–198 (2000).
- Wu, J. J., J. Phys. D: Appl. Phys. 39, 351–358 (2006).
- Wu, J. J., Tribol. Lett. 30, 99–105 (2008).
- Mesarovic, S. D. and Johnson, K. L., J. Mech. Phys. Solids. 48, 2009–2033 (2000).
- Ma, L., McMeeking, R., and Arzt, E., Int. J. Mat. Res. 98 (11), 1156–1162 (2007).
- Nguyen, D., Rasmuson, A., Thalberg, K., and Bjorn, I. N., Chem. Eng. Sci. 116, 91–98 (2014).
- Maugis, D., J. Adhes. Sci. Technol. 1 (2), 105–134 (1987).
- Greenwood, J. A. and Williamson, J. B. P., Proc. Roy. Soc. A. 295 (1442), 300–319 (1966).
- Bush, A. W., Gibson, R. D., and Thomas, T. R., Wear. 35, 87–111 (1975).
- Ciavarella, M., Delfine, V., and Demelio, G., J. Mech. Phys. Solids. 54, 2569–2591 (2006).
- Fuller, K. N. G. and Tabor, D., Proc. R. Soc. Lond. A. 345, 327–342 (1975).
- Johnson, K. L., Non-Hertzian contact of elastic spheres. In: The Mechanics ofthe Contact Between Deformable Bodies, De Pater, A. D., and Kalker, J. J., (Eds.), (Delft University Press, 1975), pp. 26–40.
- Chang, W. R., Etsion, L., and Bogy, D. B., J. Trib. 110, 50–56 (1988).
- Maugis, D., J. Adhes. Sci. Technol. 10 (2), 161–175 (1996).
- Johnson, K. L., Int. J. Solids Struct. 32 (3/4), 423–430 (1995).
- Zilberman, S., and Persson, B. N. J., Solid State Commun. 123, 173–177 (2002).
- Sriwijaya, R. R. A., Jatmiko, K., and Takahashi, K., J. Adhes. Sci. Technol. 21 (10), 899–909 (2007).
- Persson, B. N. J., J. Chem. Phys. 115 (8), 3840–3861 (2001).
- Persson, B. N. J. and Tosatti, E., J. Chem. Phys. 115 (12), 5597–5610 (2001).
- Persson, B. N. J., Eur. Phys. J. E. 8, 385–401 (2002).
- Hyun, S., Pei, L., Molinari, J.-F., and Robbins, M. O., Phys. Rev. E. 70 (2), 026–117 (2004).
- Campañá, C. and Müser, M. H., EPL. 77, 38–005 (2007).
- Dapp, W. B., Prodanov, N., and Müser, H., J. Phys.: Condens. Matter. 26, 355–002 (2014).
- Galanov, B. A., Int. J. Mech. Sci. 53 (11), 968–977 (2011).
- Medina, S. and Dini, D., J. Solids Struct. 51, 2620–2632 (2014).
- Hui, C. Y., Lin, Y. Y., Baney, J. M., and Kramer, E. J., J. Polym. Sci. B: Polym. Phys. 39, 1195–1214 (2001).
- Carbone, G. and Mangialardi, L., J. Mech. Phys. Solids. 52 (6), 1267–1287 (2004).
- Ali, S. M. and Sahoo, P., J. Phys. D: Appl. Phys. 39 (4), 721–729 (2006).
- Sahoo, P., J. Phys. D: Appl. Phys. 39 (13), 2809–2818 (2006).
- Benz, M., Rosenberg, K. J., Kramer, E. J., and Israelachvili, J. N., J. Phys. Chem. B. 110 (24), 11884–11893 (2006).
- Li, Q. and Kim, K. S., Acta Mech. Solida Sin. 22 (5), 377–390 (2009).
- Streator, J. L., and Jackson, R. L., Wear. 267 (9–10), 1436–1445 (2009).
- Zheng, J. and Streator, J. L., Tribol. Lett. 16 (1–2), 1–9 (2004).
- Williams, J. G., J. Adhes. 41, 225–239 (1993).
- Li, S., Wang, J. and Thouless, M. D., J. Mech. Phys. Solids. 52, 193–214 (2004).
- Thouless, M. D. and Yang, Q. D., Int. J. Adhes. Adhes. 28, 176–184 (2008).
- Oyharcabal, X. and Frisch, T., Phys. Rev. E. 71, 036–611 (2005).
- Williams, J. A. and Kauzlarich, J. J., Tribol. Int. 38, 951–958 (2005).
- Molinari, A. and Ravichandran, G., J. Adhes. 84, 961–995 (2008).
- Lu, Z. X., Yu, S. W., Wang, X. Y., and Feng, X. Q., Eur. Phys. J. E. 23, 67–76 (2007).
- Pesika, N. S., Tian, Y., Zhao, B., Rosenberg, K., Zeng, H., McGuiggan, P., Autumn, K., and Israelachvili, J. N., J. Adhes. 83, 383–401 (2007).
- Chen, B., Wu, P., and Gao, H., J. R. Soc. Interface. 6 (2065), 529–537.
- Collino, R. R., Philips, N. R., Rossol, M. N., McMeeking, R. M., and Begley, M. R., J. R. Soc. Interface. 11, 20140 453 (2014).
- Sauer, R. A., J. Adhes. 87 (7–8), 624–643 (2011).
- Mergel, J. C., Sauer, R. A., and Saxena, A., Struct. Multidiscipl. Optim. 50 (6), 1001–1017 (2014).
- Mergel, J. C. and Sauer, R. A., J. Adhes. 90 (5–6), 526–544 (2014).
- Wei, Y., Int. J. Solids Struct. 41, 5087–5104 (2004).
- Autumn, K., Sitti, M., Liang, Y. A., Peattie, A. M., Hansen, W. R., Sponberg, S., Kenny, T. W., Fearing, R., Israelachvili, J., and Full, R. J., Proc. Natl. Acad. Sci. USA. 99 (19), 12252–12256 (2002).
- Huber, G., Mantz, H., Spolenak, R., Mecke, K., Jacobs, K., Gorb, S. N., and Arzt, E., Proc. Natl. Acad. Sci. USA. 102 (45), 16293–16296 (2005).
- Persson, B. N. J., J. Chem. Phys. 118 (16), 7614–7621.
- Gao, H., Wang, X., Yao, H., Gorb, S., and Arzt, E., Mech. Mater. 37, 275–285 (2005).
- Tang, T., Hui, C. Y., and Glassmaker, N. J., J. R. Soc. Interface. 2, 505–516 (2005).
- Bhushan, B., Peressadko, A. G., Kim, T. W., J. Adhesion Sci. Technol. 20 (13), 1475–1491 (2006).
- Yao, H. and Gao, H., Bull. Pol. Acad. Sci. Tech. Sci. 55 (2), 141–150 (2007).
- Kim, T. W. and Bhushan, B., J. Adhes. Sci. 21 (1), 1–20 (2007).
- Kim, T. W. and Bhushan, B., Ultramicroscopy. 107, 902–912 (2007).
- Kim, T. W. and Bhushan, B., J. R. Soc. Interface. 5, 319–327 (2008).
- Schargott, M., Bioinsp. Biomim. 4, 026 002 (2009).
- Kwaki, J. S. and Kim, T. W., Int. J. Precis. Eng. Manuf. 11 (1), 171–186 (2010).
- Dai, Z. and Gorb, S., Chin. Sci. Bull. 54 (4), 549–555 (2009).
- Pantano, A., Pugno, N. M., and Gorb, S. N., Int. J. Fract. 171 (2),169–175 (2011).
- Gillies, A. G. and Fearing, R. S., J. R. Soc. Interface. 11, 20140 021 (2014).