References
- Ragnarrsson, P. The Aluminium Automotive Manual- Car Body- Body Structures.European Aluminium Association, Brussels, Belgium. (2013)
- Barnes, T. A., Pashby, I. R. Joining Techniques for Aluminium Spaceframes Used in Automobiles Part II-adhesive Bonding and Mechanical Fastners.J. Mater. Process. Technol. 72–79 (2000). doi: 10.1016/S0924-0136(99)00361-1
- Barnes, T. A.; Pashby, I. R. Joining Techniques for Aluminium Spaceframes Used in Automobiles Part I-Solid and Liquid Phase Welding.J. Mater. Process. Technol. 62–71 (2000). doi: 10.1016/S0924-0136(99)00367-2
- Mathers, G.;. The Welding of Aluminium and Its Alloys.Woodhead Publishing Limited, Cambridge, UK. (2002)
- Carle, D.; Blount, G. The Suitability of Aluminium as an Alternative Material for Car Bodies.Mater Des. 267–272 (1999). doi: 10.1016/S0261-3069(99)00003-5
- Brockmann, W.; Geiß, P. L.; Klingen, J.; Schröder, B. Adhesive Bonding. Wiley-VCH, Weinheim, Germany.(2009)
- Adams, R. D. Adhesive Bonding. Science, Technology and Applications.Woodhead Publishing Limited, Cambridge, UK (2005).
- Commission Directive (EU).2017/2096 on End-Of-Life Vehicles.Official Journal of the European Union, OJ L 299/24, 16,11,6 (2017).
- Dunne, C. F.; Levy, G. K.; Hakimi, O.; Aghion, E.; Twomey, B.; Stanton, K. T. Corrosion Behaviour of Biodegradable Magnesium Alloys with Hydroxyapatite Coatings.Surf Coat Technol. 289,37–44 (2016). doi: 10.1016/j.surfcoat.2016.01.045
- Dunne, C. F.; Hodgson, D.; Roche, K.; Twomey, B.; Stanton, K. T. Blast Coating of Superelastic NiTi Wire with PTFE to Enhance Wear Properties.Shape Mem Superelasticity. 1,41–49 (2015). doi: 10.1007/s40830-015-0004-5
- Dunne, C. F.; Twomey, B.; O’Neill, L.; Stanton, K. T. Co-Blasting of Titanium Surfaces with an Abrasive and Hydroxyapatite to Produce Bioactive Coatings: Substrate and Coating Characterisation.J Biomater Appl. 28,767–778 (2014). doi: 10.1177/0885328213480534
- Dunne, C. F.; Twomey, B.; Stanton, K. T. Effect of a Blast Coating Process on the Macro- and Microstructure of Grade 5 Titanium Foam.Mater Lett. 147,75–78 (2015). doi: 10.1016/j.matlet.2015.02.044
- Doherty, K. A.; Dunne, C. F.; Norman, A.; McCaul, T.; Twomey, B.; Stanton, K. T. Flat Absorber Coating for Spacecraft Thermal Control Applications.J. Spacecraft Rockets. (2016). doi: 10.2514/1.A33490
- Dunne, C. F.; Roche, K.; Janssen, A.; Zhong, X.; Burke, M. G.; Twomey, B.;, et al. Ultrafine Grain Formation and Coating Mechanism Arising from a Blast Coating Process: A Transmission Electron Microscopy Analysis.Surf Interface Anal. (2017) doi: 10.1002/sia.6324
- Astm, A. S. T. M. D.;. 1002-10. Standard Test Method for Apparent Shear Strength of Single-Lap-Joint Adhesively Bonded Metal Specimens by Tension Loading (Metal-To-Metal).ASTM International. (2010)
- Sae, S. A. E. J.;. 1523-2012. Metal to Metal Overlap Shear Strength Testing for Automotive Type Adhesives.SAE International, Pennsylvania, USA. (2012)
- Rodriguez Sanchez, F. S.;. Fracture Behaviour of Automotive Adhesive Joints. PhD Thesis, Imperial College London. (2008).
- Gale, W. F.; Totemeier, T. C., editors.Metallography. Smithells Met. Ref. Book, 8th, Oxford, UK, .10–87(2004)
- ASTM. ASTM B117-11,Standard Practice for Operating Salt Spray (Fog) Apparatus. ASTM International, Pennsylvania, USA (2011)
- Davis, M. J.; McGregor, A. Assessing Adhesive Bond Failures: Mixed-Mode Bond Failures Explained.Presented at the ISASI Australian Safety Seminar, Canberra, Australia, Jun 4-6, 2010 (2010).
- Boutar, Y.; Naïmi, S.; Mezlini, S.; Sik Ali, M. B. Effect of Surface Treatment on the Shear Strength of Aluminium Adhesive Single-Lap Joints for Automotive Applications.Int J Adhes Adhes. 38–43 (2016). doi: 10.1016/j.ijadhadh.2015.12.023
- Momber, A.;. Blast Cleaning Technology.Springer-Verlag, Berlin Heidelberg. (2008)
- Dunne, C.;. Coatings on Metals for Biomedical Applications.PhD Thesis, University College Dublin, (2016).
- Baroutaji, A.; Carton, J. G.; Oladoye, A. M.; Stokes, J.; Twomey, B.; Olabi, A. G. Ex-Situ Evaluation of PTFE Coated Metals in a Proton Exchange Membrane Fuel Cell Environment.Surf Coat Technol. (2016). doi: 10.1016/j.surfcoat.2016.11.105
- Uehara, K.; Sakurai, M. Bonding Strength of Adhesives and Surface Roughness of Joined Parts.J. Mater. Process. Technology. 178–181 (2002). doi: 10.1016/S0924-0136(02)00122-X
- Wenzel, RN. Resistance of Solid Surfaces to Wetting by Water. Ind. Eng. Chem, 28, 988–994. doi: 10.1021/ie50320a024.
- Kubiak, K. J.; Wilson, M. C. T.; Mathia, T. G.; Carval, P. H. Wettability versus Roughness of Engineering Surfaces.Wear. 271,523–528 (2011). doi: 10.1016/j.wear.2010.03.029
- Șekercíoğlu, T.; Meran, C.; Rende, H.; Gülsöz, A. The Effects of Surface Roughness on the Strength of Adhesively Bonded Cylindrical Components.J. Mater. Process. Technol. 82–86 (2003). doi: 10.1016/S0924-0136(03)00463-1
- Singh, V.; Agarwal, S.; Saxena, S. Adhesively-Bonded Joints: Adhesives, Adhesion Theories, Failures and Surface Pre-Treatment.Indian Inst. Technol. Guwahati. (2010).
- Lee, LH. Adhesive Bonding. Springer US: New York,
- Trung, P. Q.; Butler, D. L.; Khun, N. W. Effects of Shot Peening Pressure, Media Type and Double Shot Peening on the Microstructure, Mechanical and Tribological Properties of Low-Alloy Steel.Surf. Topogr. Metrol. Prop. (2016). doi: 10.1088/2051-672X/4/4/045001
- Birley, S.; Owens, A. Surface Stresses Induced by Grit Blasting.Anti-Corrosion Methods Mater. 26,5–7 (1979). doi: 10.1108/eb007103
- Jiang, X. P.; Wang, X. Y.; Li, J. X.; Li, D. Y.; Man, C.-S.; Shepard, M. J.;, et al.Enhancement of Fatigue and Corrosion Properties of Pure Ti by Sandblasting. Mater Sci Eng A. 429,30–35 (2006) doi: 10.1016/j.msea.2006.04.024