211
Views
1
CrossRef citations to date
0
Altmetric
Research Article

Single particle adhesion variability in additive manufacturing powders

ORCID Icon &
Pages 19-37 | Received 08 Mar 2019, Accepted 19 May 2019, Published online: 30 May 2019

References

  • Hays, D. A. Toner Adhesion. J. Adhes. 1995, 51(1–4), 41–48. DOI: 10.1080/00218469508009988.
  • Shinbrot, T.; Herrmann, H. J. Granular Matter: Static in Motion. Nature. 2008, 451(7180), 773–774. DOI: 10.1038/451773a.
  • Vallabh, C. K. P.; Cetinkaya, C. Adhesion Distribution on the Surface of a Single Microparticle. Appl. Phys. Lett. 2016, 109(12), 121602. DOI: 10.1063/1.4963232.
  • Murthy Peri, M. D.; Cetinkaya, C. Non-Contact Microsphere–Surface Adhesion Measurement via Acoustic Base Excitations. J. Colloid Interface Sci. 2005, 288(2), 432–443. DOI: 10.1016/j.jcis.2005.04.023.
  • Peri, M. D. M.; Cetinkaya, C. Rolling Resistance Moment of Microspheres on Surfaces. Philos. Mag. 2005, 85(13), 1347–1357. DOI: 10.1080/14786430500037122.
  • Akseli, I.; Miraskari, M.; Zhang, H.; Ding, W.; Cetinkaya, C. Non-Contact Rolling Bond Stiffness Characterization of Polyvinylpyrrolidone (PVP) Particles. J. Adhes. Sci. Technol. 2011, 25(4–5), 407–434. DOI: 10.1163/016942410X525641.
  • Vallabh, C. K. P.; Vahdat, A. S.; Cetinkaya, C. Charge Contribution to Patch-Charged Microparticle Adhesion. Appl. Phys. Lett. 2014, 105(21), 211905. DOI: 10.1063/1.4902827.
  • Herbold, E. B.; Walton, O.; Homel, M. A. Simulation of Powder Layer Deposition in Additive Manufacturing Processes Using the Discrete Element Method; Lawrence Livermore National Lab. (LLNL): Livermore, CA, 2015.
  • Li, S.; Marshall, J. S.; Liu, G.; Yao, Q. Adhesive Particulate Flow: The Discrete-Element Method and Its Application in Energy and Environmental Engineering. Prog. Energy Combust. Sci. 2011, 37(6), 633–668. DOI: 10.1016/j.pecs.2011.02.001.
  • Clayton, J.; Millington-Smith, D.; Armstrong, B. The Application of Powder Rheology in Additive Manufacturing. JOM 2015, 67(3), 544–548. DOI: 10.1007/s11837-015-1293-z.
  • Sutton, A. T.; Kriewall, C. S.; Leu, M. C.; Newkirk, J. W. Powder Characterisation Techniques and Effects of Powder Characteristics on Part Properties in Powder-Bed Fusion Processes. Virtual Phys. Prototyp. 2017, 12(1), 3–29. DOI: 10.1080/17452759.2016.1250605.
  • Lewandowski, J. J.; Seifi, M. Metal Additive Manufacturing: A Review of Mechanical Properties. Annu. Rev. Mater. Res. 2016, 46(1), 151–186. DOI: 10.1146/annurev-matsci-070115-032024.
  • Seifi, M.; Salem, A.; Beuth, J.; Harrysson, O.; Lewandowski, J. J. Overview of Materials Qualification Needs for Metal Additive Manufacturing. JOM 2016, 68(3), 747–764. DOI: 10.1007/s11837-015-1810-0.
  • Farzi, B.; Vallabh, C. K. P.; Stephens, J. D.; Cetinkaya, C. Critical Rolling Angle of Microparticles. Appl. Phys. Lett. 2016, 108(11), 111602. DOI: 10.1063/1.4944043.
  • Vahdat, A. S.; Cetinkaya, C. Characterization of Single Particle Adhesion: A Review of Recent Progress. In Particle Adhesion and Removal; John Wiley & Sons, Inc., 2015, pp 157–200.
  • Weeks, B. L.; Vaughn, M. W.; DeYoreo, J. J. Direct Imaging of Meniscus Formation in Atomic Force Microscopy Using Environmental Scanning Electron Microscopy. Langmuir 2005, 21(18), 8096–8098. DOI: 10.1021/la0512087.
  • Johnson, K. L.; Greenwood, J. A. An Adhesion Map for the Contact of Elastic Spheres. J. Colloid Interface Sci. 1997, 192(2), 326–333. DOI: 10.1006/jcis.1997.4984.
  • Saeedi Vahdat, A.; Azizi, S.; Cetinkaya, C. Doubling of Rocking Resonance Frequency of an Adhesive Microparticle Vibrating on a Surface. Appl. Phys. Lett. 2012, 101(10), 101602. DOI: 10.1063/1.4751109.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.