References
- Tlustochowicz, G.; Serrano, E.; Steiger, R. State-of-the-art Review on Timber Connections with Glued-in Steel Rods. Mater. Struct. 2011, 44(5), 997–1020. DOI: 10.1617/s11527-010-9682-9.
- Steiger, R.; Serrano, E.; Stepinac, M.; Rajčić, V.; O’Neill, C.; McPolin, D. et al. Strengthening of Timber Structures with Glued-in Rods. Constr. Build. Mater. 2015, 97, 90–105. DOI: 10.1016/j.conbuildmat.2015.03.097.
- Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L. et al. Rods Glued in Engineered Hardwood Products Part I: Experimental Results under Quasi-static Loading. Int. J. Adhes. Adhes. 2018. DOI: 10.1016/j.ijadhadh.2018.05.003.
- Bainbridge, R.; Mettem, C.; Harvey, K.; Ansell, M. Bonded-in Rod Connections for Timber Structures—Development of Design Methods and Test Observations. Int. J. Adhes. Adhes. 2002, 22(1), 47–59. DOI: 10.1016/S0143-7496(01)00036-7.
- Gonzalez, E.; Avez, C.; Tannert, T. Timber Joints with Multiple Glued-in Steel Rods. J. Adhes. 2015, 92(7–9), 635–651. DOI: 10.1080/00218464.2015.1099098.
- Chans, D. O.; Cimadevila, J. E.; Gutiérrez, E. M. Withdrawal Strength of Threaded Steel Rods Glued with Epoxy in Wood. Int. J. Adhes. Adhes. 2013, 44, 115–212. DOI: 10.1016/j.ijadhadh.2013.02.008.
- Ling, Z.; Yang, H.; Liu, W.; Lu, W.; Zhou, D.; Wang, L. Pull-out Strength and Bond Behaviour of Axially Loaded Rebar Glued-in Glulam. Constr. Build. Mater. 2014, 65, 440–449. DOI: 10.1016/j.conbuildmat.2014.05.008.
- Grunwald, C.; Kaufmann, M.; Alter, B.; Vallée, T.; Tannert, T. Numerical Investigations and Capacity Prediction of G-FRP Rods Glued into Timber. Compos. Struct. 2018, 202, 47–59. DOI: 10.1016/j.compstruct.2017.10.010.
- Lorenzis, L. D.; Scialpi, V.; La Tegola, A. Analytical and Experimental Study on Bonded-In CFRP Bars in Glulam Timber. Compos. B Eng. 2005, 36(4), 279–289. DOI: 10.1016/j.compositesb.2004.11.005.
- Yeboah, D.; Taylor, S.; McPolin, D.; Gilfillan, R. Pull-out Behaviour of Axially Loaded Basalt Fibre Reinforced Polymer (BFRP) Rods Bonded Perpendicular to the Grain of Glulam Elements. Constr. Build. Mater. 2013, 38, 962–969. DOI: 10.1016/j.conbuildmat.2012.09.014.
- Kaufmann, M.; Kolbe, J.; Vallée, T. Hardwood Rods Glued into Softwood Using Environmentally Sustainable Adhesives. J. Adhes. 2018, 94(11), 991–1016. DOI: 10.1080/00218464.2017.1385459.
- Zhu, H.; Faghani, P.; Tannert, T. Experimental Investigations on Timber Joints with Single Glued-in FRP Rods. Constr. Build. Mater. 2017, 140, 167–172. DOI: 10.1016/j.conbuildmat.2017.02.091.
- Estévez Cimadevila, J.; Vázquez Rodríguez, J. A.; Otero Chans, M. D. Experimental Behaviour of Threaded Steel Rods Glued into High-density Hardwood. Int. J. Adhes. Adhes. 2007, 27(2), 136–144. DOI: 10.1016/j.ijadhadh.2006.01.006.
- Stepinac, M.; Rajčić, V.; Hunger, F.; van de Kuilen, J. W. G. Glued-In Rods in Beech Laminated Veneer Lumber. Eur. J. Wood Wood Prod. 2016, 74(3), 463–466. DOI: 10.1007/s00107-016-1037-y.
- Azinović, B.; Serrano, E.; Kramar, M.; Pazlar, T. Experimental Investigation of the Axial Strength of Glued-In Rods in Cross Laminated Timber. Mater. Struct. 2018, 51(6), 369. DOI: 10.1617/s11527-018-1268-y.
- Myslicki, S.; Bletz-Mühldorfer, O.; Diehl, F.; Lavarec, C.; Vallée, T.; Scholz, R. et al. Fatigue of Glued-In Rods in Engineered Hardwood Products – Part I: Experimental Results. J. Adhes. 2019, 16(3), 1–27. DOI: 10.1080/00218464.2018.1555477.
- Bengtsson, C.; Johansson, C.-J. GIROD – Glued-in Rods for Timber Structures: SMT4-CT97-2199. SR Report 2002:26. Boras/Sweden; 2002.
- Kohl, D.; Vallée, T.; Vorholt, F.; Böhm, S. Manufacturing Gluing-in-rods under Low Temperatures and with Shorter Process Times Using Induction and Resistive Heating. Welding World. 2017, 61(3), 575–580. DOI: 10.1007/s40194-017-0432-2.
- Lettieri, M.; Frigione, M. Effects of Humid Environment on Thermal and Mechanical Properties of a Cold-curing Structural Epoxy Adhesive. Constr. Build. Mater. 2012, 30, 753–760. DOI: 10.1016/j.conbuildmat.2011.12.077.
- Moussa, O.; Vassilopoulos, A. P.; Keller, T. Effects of Low-temperature Curing on Physical Behavior of Cold-curing Epoxy Adhesives in Bridge Construction. Int. J. Adhes. Adhes. 2012, 32, 15–22. DOI: 10.1016/j.ijadhadh.2011.09.001.
- Arrhenius, S. Über Die Dissociationswärme Und Den Einfluss Der Temperatur Auf den Dissociationsgrad der Elektrolyte. Zeitschrift Für Physikalische Chemie. 1889, 4U(1). DOI: 10.1515/zpch-1889-0408.
- Laidler, K. The Development of the Arrhenius Equation. J. Chem. Educ. 1984, 61, 494–498. DOI: 10.1021/ed061p494.
- Espenson, J. H. Chemical Kinetics and Reaction Mechanisms; McGraw-Hill: New York, 1995.
- Yousefi, A.; Lafleur, P. G.; Gauvin, R. Kinetic Studies of Thermoset Cure Reactions: A Review. Polym. Compos. 1997, 18(2), 157–168. DOI: 10.1002/pc.10270.
- Abliz, D.; Duan, Y.; Steuernagel, L.; Xie, L.; Li, D.; Ziegmann, G. Curing Methods for Advanced Polymer Composites - A Review. Polym. Polym. Composites. 2013, 21(6), 341–348. DOI: 10.1177/096739111302100602.
- Goss, B. Bonding Glass and Other Substrates with UV Curing Adhesives. Int. J. Adhes. Adhes. 2002, 22, 405–408. DOI: 10.1016/S0143-7496(02)00022-2.
- Rider, A. N.; Wang, C. H.; Cao, J. Internal Resistance Heating for Homogeneous Curing of Adhesively Bonded Repairs. Int. J. Adhes. Adhes. 2011, 31(3), 168–176. DOI: 10.1016/j.ijadhadh.2011.01.001.
- Thalacker, V. Radiation Processing of Coatings and Adhesives - an Overview. Int. J. Rad. Appl. Instrum. 1990. DOI: 10.1016/1359-0197(90)90051-I.
- Tay, T. E.; Fink, B. K.; McKnight, S. H.; Yarlagadda, S.; Gillespie, J. W. Accelerated Curing of Adhesives in Bonded Joints by Induction Heating. J. Compos. Mater. 1999, 33, 1643–1664. DOI: 10.1177/002199839903301704.
- Bayerl, T.; Duhovic, M.; Mitschang, P.; Bhattacharyya, D. The Heating of Polymer Composites by Electromagnetic Induction – A Review. Compos. Part A Appl. Sci. Manuf. 2014, 57, 27–40. DOI: 10.1016/j.compositesa.2013.10.024.
- Ratsch, N.; Böhm, S.; Voß, M.; Adam, M.; Wirries, J.; Vallée, T. Accelerated Curing of Glued-in Threaded Rods by Means of Inductive Heating – Part I: Experiments. J. Adhes. 2019, 1–26. DOI: 10.1080/00218464.2019.1654864.
- Ratsch, N.; Böhm, S.; Voß, M.; Adam, M.; Wirries, J.; Vallée, T. Accelerated Curing of Glued-in Threaded Rods by Means of Inductive Heating – Part II: Modelling. J. Adhes. 2019, 1–31. DOI: 10.1080/00218464.2019.1654865.
- Kamal, M. R.; Sourour, S. Kinetics and Thermal Characterization of Thermoset Cure. Polym. Eng. Sci. 1973, 13(1), 59–64. DOI: 10.1002/pen.760130110.
- Fu, Y.-X.; He, Z.-X.; Mo, D.-C.; Lu, -S.-S. Thermal Conductivity Enhancement with Different Fillers for Epoxy Resin Adhesives. Appl. Therm. Eng. 2014, 66(1), 493–498. DOI: 10.1016/j.applthermaleng.2014.02.044.
- Kol, H. Ş.; Sefil, Y. The Thermal Conductivity of Fir and Beech Wood Heat Treated at 170, 180, 190, 200, and 212°C. J. Appl. Polym. Sci. 2011, 121(4), 2473–2480. DOI: 10.1002/app.33885.
- Incropera, F. P. Fundamentals of Heat and Mass Transfer, Seventh Edition International Student Version, 7th ed.; Wiley, J: New York, NY, 2011.
- Grunwald, C.; Vallée, T.; Fecht, S.; Bletz-Mühldorfer, O.; Diehl, F.; Bathon, L. et al. Rods Glued in Engineered Hardwood Products Part II: Numerical Modelling and Capacity Prediction. Int. J. Adhes. Adhes. 2019, 90, 182–198. DOI: 10.1016/j.ijadhadh.2018.05.004.