Measuring the static shear strength of anaerobic adhesives in finite thickness under high pressure

References

• da Silva, L. F. M.; Pirondi, A.; Öchsner, A. Hybrid Adhesive Joints; Advanced Structured Materials; Springer Berlin Heidelberg, 2011.
   Google Scholar
• Dragoni, E. Fatigue Testing of Taper Press Fits Bonded with Anaerobic Adhesives. J. Adhes. 2003, 79, 729–747. DOI: 10.1080/00218460390214442.
   Web of Science ®Google Scholar
• Croccolo, D.; De Agostinis, M.; Vincenzi, N. Design and Optimization of Shaft-Hub Hybrid Joints for Lightweight Structures: Analytical Definition of Normalizing Parameters. Int. J. Mech. Sci. 2012, 56(1), 77–85. DOI: 10.1016/j.ijmecsci.2012.01.007.
   Web of Science ®Google Scholar
• Croccolo, D.; De Agostinis, M.; Mauri, P.; Olmi, G. Influence of the Engagement Ratio on the Joint Strength of Press Fitted and Adhesively Bonded Specimens. Int. J. Adhes. Adhes. 2014, 53, 80–88. DOI: 10.1016/j.ijadhadh.2014.01.017.
   Web of Science ®Google Scholar
• Croccolo, D.; De Agostinis, M.; Fini, S.; Olmi, G. An Experimental Study on the Response of a Threadlocker, Involving Different Materials, Screw Dimensions and Thread Proportioning. Int. J. Adhes. Adhes. 2018, 83, 116–122. DOI: 10.1016/J.IJADHADH.2018.02.024.
   Web of Science ®Google Scholar
• Adams, R. D.; Comyn, J.; Wake, W. C. Structural Adhesive Joints in Engineering. Struct. Adhes. Joints Eng. 1997. Chapman and Hall.
   Google Scholar
• Gallio, G.; Marcuccio, G.; Bonisoli, E.; Tornincasa, S.; Pezzini, D.; Ugues, D.; Lombardi, M.; Rovarino, D.; Fino, P.; Montanaro, L. Study of the Interference Contribution on the Performance of an Adhesive Bonded Press-Fitted Cylindrical Joint. Int. J. Adhes. Adhes. 2014, 53, 89–96. DOI: 10.1016/j.ijadhadh.2014.01.008.
   Web of Science ®Google Scholar
• Sekercioglu, T.; Gulsoz, A.; Rende, H. The Effects of Bonding Clearance and Interference Fit on the Strength of Adhesively Bonded Cylindrical Components. Mater. Des. 2005, 26(4), 377–381. DOI: 10.1016/j.matdes.2004.05.016.
   Web of Science ®Google Scholar
• Kleiner, F.; Fleischmann, W. Technologies of Threadlocking and Interference-Fit Adhesive Joints. Adv. Struct. Mater. 2011, 6, 227–255. DOI: 10.1007/8611_2010_39.
   Google Scholar
• Yoneno, M.; Sawa, T.; Shimotakahara, K.; Motegi, Y. Axisymmetric Stress Analysis and Strength of Bonded Shrink-Fitted Joints Subjected to Push-Off Forces. JSME Int. J. Ser. A. 1997, 40(4), 362–374. DOI: 10.1299/jsmea.40.362.
   Web of Science ®Google Scholar
• https://www.henkel-adhesives.com/it/en/insights/all-insights/success-stories/berg.html
   Google Scholar
• Dragoni, E.; Mauri, P. Intrinsic Static Strength of Friction Interfaces Augmented with Anaerobic Adhesives. Int. J. Adhes. Adhes. 2000, 20(4), 315–321. DOI: 10.1016/S0143-7496(99)00062-7.
   Web of Science ®Google Scholar
• Dragoni, E.; Mauri, P. Cumulative Static Strength of Tightened Joints Bonded. Proc. Inst. Mech. Eng. Part L 2002 Nov;2001:9–16.
   Google Scholar
• Dragoni, E.; Mauri, P. Science of Friction-Adhesive Joints. In Hybrid Adhesive Joints; da Silva, L. F. M., Pirondi, A., Eds.; Springer Berlin Heidelberg: Berlin, 2011; pp 211–226. DOI: 10.1007/978-3-642-16623-5.
   Google Scholar
• Castagnetti, D.; Dragoni, E. Experimental Assessment of a Micro-Mechanical Model for the Static Strength of Hybrid Friction-Bonded Interfaces. J. Adhes. 2013, 89(8), 642–659. DOI: 10.1080/00218464.2012.747179.
   Web of Science ®Google Scholar
• Castagnetti, D.; Dragoni, E. Predicting the Macroscopic Shear Strength of Adhesively-Bonded Friction Interfaces by Microscale Finite Element Simulations. Comput. Mater. Sci. 2012, 64, 146–150. DOI: 10.1016/j.commatsci.2012.05.026.
   Web of Science ®Google Scholar
• Castagnetti, D.; Dragoni, E. Adhesively-Bonded Friction Interfaces: Macroscopic Shear Strength Prediction by Microscale Finite Element Simulations. Int. J. Adhes. Adhes. 2013, 53, 57–64. DOI: 10.1016/j.ijadhadh.2014.01.016.
   Web of Science ®Google Scholar
• Castagnetti, D.; Dragoni, E. Experimental Investigation and Model Validation of the Shear Strength of Hybrid Interfaces up to Complete Failure. J. Adhes. 2016, 92, 7–9. DOI: 10.1080/00218464.2015.1115740.
   Web of Science ®Google Scholar
• Ragni, M.; Castagnetti, D.; Dragoni, E. Experimental Validation of a Simple Shear Strength Model for Hybrid Friction-Bonded Interfaces. Int. J. Adhes. Adhes. 2018, 83, 130–136. DOI: 10.1016/j.ijadhadh.2018.02.026.
   Web of Science ®Google Scholar
• Dragoni, E.; Mauri, P. Cumulative Static Strength of Tightened Joints Bonded with Anaerobic Adhesives. Proc. I Mech E Part L J. Mater. Des. Appl. 2002, 9–15. DOI: 10.1243/14644200260044724.
   Google Scholar
• Henkel. Loctite ® 243^TM, Technical Data Sheet. 2010.
   Google Scholar
• Corigliano, P.; Crupi, V.; Guglielmino, E.; Mariano Sili, A. Full-Field Analysis of AL/FE Explosive Welded Joints for Shipbuilding Applications. Mar. Struct. 2018, 57, 207–218. DOI: 10.1016/j.marstruc.2017.10.004.
   Web of Science ®Google Scholar
• Corigliano, P.; Crupi, V.; Guglielmino, E. Non Linear Finite Element Simulation of Explosive Welded Joints of Dissimilar Metals for Shipbuilding Applications. Ocean Eng. 2018, 160, 346–353. DOI: 10.1016/j.oceaneng.2018.04.070.
   Web of Science ®Google Scholar
• Corigliano, P.; Crupi, V.; Fricke, W.; Friedrich, N.; Guglielmino, E. Experimental and Numerical Analysis of Fillet-Welded Joints under Low-Cycle Fatigue Loading by Means of Full-Field Techniques. Proc. Inst. Mech. Eng. Part C J. Mech. Eng. Sci. 2015, 229, 7. DOI: 10.1177/0954406215571462.
   Web of Science ®Google Scholar
• Pugstaller, R.; Wallner, G. M.; Strauß, B.; Fluch, R. Advanced Characterization of Laminated Electrical Steel Structures under Shear Loading. J. Adhes. 2019, 95(9), 834–848. DOI: 10.1080/00218464.2018.1450747.
   Web of Science ®Google Scholar
• Fernandes, R. L.; Campilho, R. D. S. G. Testing Different Cohesive Law Shapes to Predict Damage Growth in Bonded Joints Loaded in Pure Tension. J. Adhes. 2017, 93(1–2), 57–76. DOI: 10.1080/00218464.2016.1169176.
   Web of Science ®Google Scholar
• Bamberg, P. A. M. G. P.; Reisgen, U.; Schiebahn, A.; Barbosa, J. D. V.; Marx, B.; Coelho, R. S. Digital Image Correlation Analysis of the Effects of the Overlap Length, Adhesive Thickness and Adherends Yield Strength Over Similar and Dissimilar Joints of High Strength Steel And Aluminum Alloys. Int. J. Adhes. Adhes. 2018, 83, 69–75. DOI: 10.1016/J.IJADHADH.2018.02.010.
   Web of Science ®Google Scholar
• Comer, A. J.; Katnam, K. B.; Stanley, W. F.; Young, T. M. Characterising the Behaviour of Composite Single Lap Bonded Joints Using Digital Image Correlation. Int. J. Adhes. Adhes. 2013, 40, 215–223. DOI: 10.1016/J.IJADHADH.2012.08.010.
   Web of Science ®Google Scholar
• EN ISO 6892-1:2009. Metallic Materials - Tensile Testing - Part 1: Method of Test at Room Temperature. 2009.
   Google Scholar
• Sineokov, A. P.; Aronovich, D. A.; Murokh, A. F.; Khamidulova, Z. S. Mechanism of Initiation of the Curing of Anaerobic Adhesives. Int. Polym. Sci. Technol. 2008, 35(7), 31–38. DOI: 10.1177/0307174x0803500705.
   Google Scholar
• Johnson, K. L. Contact Mechanics; Cambridge University Press, 1985. DOI: 10.1017/CBO9781139171731.
   Google Scholar