References
- Tohmura, S. I.; Hse, C. Y.; Formaldehyde Emission, H. M. High-Temperature Stability of Cured Urea-Formaldehyde Resins. J. Wood Sci. 2000, 46(4), 303–309. DOI: https://doi.org/10.1007/BF00766221.
- Salthammer, T.;. Formaldehyde Sources, Formaldehyde Concentrations and Air Exchange Rates in European Housings. Build. Environ. 2019, 150(October 2018), 219–232. DOI: https://doi.org/10.1016/j.buildenv.2018.12.042.
- Myers, G.;. Resin Hydrolysis and Mechanisms of Formaldehyde Release from Bonded Wood Products; Forest Products Labouratry: Madison, WI, 1987, pp 119–156. DOI: https://doi.org/10.1021/bk-1986-0316.ch008.
- Lubis, M. A. R.; Park, B. D. Analysis of the Hydrolysates from Cured and Uncured Urea-Formaldehyde (UF) Resins with Two F/U Mole Ratios. Holzforschung. 2018, 72(9), 759–768. DOI: https://doi.org/10.1515/hf-2018-0010.
- Costa, N. A.; Pereira, J.; Ferra, J.; Cruz, P.; Martins, J.; Magalhães, F. D.; Mendes, A.; Carvalho, L. H. Formaldehyde Emission in Wood Based Panels: Effect of Curing Reactions. Int. Wood Prod. J. 2014, 5(3), 146–150. DOI: https://doi.org/10.1179/2042645314Y.0000000070.
- Hassannejad, H.; Shalbafan, A.; Rahmaninia, M. Reduction of Formaldehyde Emission from Medium Density Fiberboard by Chitosan as Scavenger. J. Adhes. 2018, 1–17. DOI: https://doi.org/10.1080/00218464.2018.1515631.
- Zhu, X.; Xu, E.; Lin, R.; Wang, X.; Gao, Z. Decreasing the Formaldehyde Emission in Urea-Formaldehyde Using Modified Starch by Strongly Acid Process. J. Appl. Polym. Sci. 2014, 131(9), 2–7. DOI: https://doi.org/10.1002/app.40202.
- Ghafari, R.; DoostHosseini, K.; Abdulkhani, A.; Mirshokraie, S. A. Replacing Formaldehyde by Furfural in Urea Formaldehyde Resin: Effect on Formaldehyde Emission and Physical–Mechanical Properties of Particleboards. Eur. J. Wood Wood Prod. 2016, 74(4), 609–616. DOI: https://doi.org/10.1007/s00107-016-1005-6.
- Younesi-kordkheili, H.; Pizzi, A.; Niyatzade, G. Reduction of Formaldehyde Emission from Particleboard by Phenolated Kraft Lignin Reduction of Formaldehyde Emission from Particleboard by Phenolated Kraft Lignin. GADH. 2016, 92(6), 485–497. DOI: https://doi.org/10.1080/00218464.2015.1046596.
- Yamanaka, S.; Magara, K.; Hirabayashi, Y.; Fujimoto, T.; Kuga, Y. Reduction of Formaldehyde Emission from Plywood Using Composite Resin Composed of Resorcinol–Formaldehyde and Urea-Modified Scallop Shell Nanoparticles. Wood Sci. Technol. 2017, 51(2), 297–308. DOI: https://doi.org/10.1007/s00226-016-0868-3.
- Costa, N. A.; Pereira, J.; Ferra, J.; Cruz, P.; Martins, J.; Magalhães, F. D.; Mendes, A.; Carvalho, L. H. Scavengers for Achieving Zero Formaldehyde Emission of Wood-Based Panels. Wood Sci. Technol. 2013, 47(6), 1261–1272. DOI: https://doi.org/10.1007/s00226-013-0573-4.
- Park, B. D.; Kim, J. Dynamic Mechanical Analysis of Urea-Formaldehyde Resin Adhesives with Different Formaldehyde-to-Urea Molar Ratios. J. Appl. Phys. 2008, 108, 2045–2051. DOI: https://doi.org/10.1002/app.
- Wang, H.; Cao, M.; Li, T.; Yang, L.; Duan, Z.; Zhou, X.; Du, G. Characterization of the Low Molar Ratio Urea-Formaldehyde Resin with 13C NMR and ESI-MS: Negative Effects of the Post-Added Urea on the Urea-Formaldehyde Polymers. Polymers (Basel). 2018, 10(6). DOI: https://doi.org/10.3390/polym10060602.
- Levendis, D.; Pizzil, A.; Ferg, E. The Correlation of Strength and Formaldehyde Emission with the Crystalline/Amorphous Structure of UF Resins. Holzforschung. 1992, 46(3), 263–269. DOI: https://doi.org/10.1515/hfsg.1992.46.3.263.
- Liu, M.; Thirumalai, R. V. K. G.; Wu, Y.; Wan, H. Characterization of the Crystalline Regions of Cured Urea Formaldehyde Resin. RSC Adv. 2017, 7(78), 49536–49541. DOI: https://doi.org/10.1039/c7ra08082d.
- Park, B. D.; Causin, V. Crystallinity and Domain Size of Cured Urea–Formaldehyde Resin Adhesives with Different Formaldehyde/Urea Mole Ratios. Eur. Polym. J. 2013, 49(2), 532–537. DOI: https://doi.org/10.1016/j.eurpolymj.2012.10.029.
- Singh, A. P.; Causin, V.; Nuryawan, A.; Park, B. Morphological, Chemical and Crystalline Features of Urea-Formaldehyde Resin Cured in Contact with Wood. Eur. Polym. J. 2014, 56, 185–193. DOI: https://doi.org/10.1016/j.eurpolymj.2014.04.014.
- Dunker, A. K.; John, W. E.; Rammon, R.; Farmer, B.; Johns, S. J. Slightly Bizarre Protein Chemistry: Urea-Formaldehyde Resin from a Biochemical Perspective. J. Adhes. 1986, 19(2), 153–176. DOI: https://doi.org/10.1080/00218468608071219.
- Nousir, S.; Arus, V. A.; Shiao, T. C.; Bouazizi, N.; Roy, R.; Azzouz, A. Organically Modified Activated Bentonites for the Reversible Capture of CO2. Microporous Mesoporous Mater. 2019, 290(July), 109652. DOI: https://doi.org/10.1016/j.micromeso.2019.109652.
- Lei, H.; Du, G.; Pizzi, A.; Celzard, A. Influence of Nanoclay on Urea-Formaldehyde Resins for Wood Adhesives and Its Model. J. Appl. Polym. Sci. 2008, 109, 2442–2451. DOI: https://doi.org/10.1002/app.
- Zhou, X.; Pizzi, A.; Du, G. The Effect of Nanoclay on Melamine-Urea-Formaldehyde Wood Adhesives. J. Adhes. Sci. Technol. 2012, 26(10–11), 1341–1348. DOI: https://doi.org/10.1163/156856111X618498.
- Prakalathan, K.; Mohanty, S.; Nayak, S. K. Influence of Transition Metal Ion-Adsorbed Montmorillonite on Thermal Stability, Isothermal Crystallization Kinetics and Mechanical Performance of Polylactic Acid Nanocomposites. J. Thermoplast. Compos. Mater. 2014, 27(12), 1631–1650. DOI: https://doi.org/10.1177/0892705712475004.
- Nawani, P.; Gelfer, M. Y.; Hsiao, B. S.; Frenkel, A.; Gilman, J. W.; Khalid, S. Surface Modification of Nanoclays by Catalytically Active Transition Metal Ions. Langmuir. 2007, 23(19), 9808–9815. DOI: https://doi.org/10.1021/la700908m.
- Wibowo, E. S.; Lubis, M. A. R.; Park, B.-D.; Kim, J.-S.; Causin, V. Converting Crystalline Thermosetting Urea – Formaldehyde Resins to Amorphous Polymer Using Modified Nanoclay. J. Ind. Eng. Chem. 2020. DOI: https://doi.org/10.1016/j.jiec.2020.03.014.
- Wibowo, E. S.; Park, B. D. Cure Kinetics of Low-Molar-Ratio Urea-Formaldehyde Resins Reinforced with Modified Nanoclay Using Different Kinetic Analysis Methods. Thermochim. Acta. 2020, 686, 178552. DOI: https://doi.org/10.1016/j.tca.2020.178552.
- Pospíšil, M.; Čapková, P.; Weiss, Z.; Maláč, Z.; Šimoník, J. Intercalation of Octadecylamine into Montmorillonite: Molecular Simulations and XRD Analysis. J. Colloid Interface Sci. 2002, 245(1), 126–132. DOI: https://doi.org/10.1006/jcis.2001.7956.
- Lubis, M. A. R.; Park, B.-D.; Influence of Initial Molar Ratios on the Performance of Low Molar Ratio Urea-Formaldehyde Resin Adhesives. J. Korean Wood Sci. Technol. 2020, 482, 1–18. DOI:https://doi.org/10.5658/WOOD.2020.48.2.136.
- Kissinger, H. E.;. Reaction Kinetics in Differential Thermal Analysis. Anal. Chem. 1957, 29(11), 1702–1706. DOI: https://doi.org/10.1021/ac60131a045.
- Vyazovkin, S. V.; Lesnikovich, A. I. Estimation of the Pre-Exponential Factor in the Isoconversional Calculation of Effective Kinetic Parameters. Thermochim. Acta. 1988, 128(C), 297–300. DOI: https://doi.org/10.1016/0040-6031(88)85372-3.
- Vyazovkin, S. V.; Lesnikovich, A. I. Practical Application of Isoconversional Methods. Thermochim. Acta. 1992, 203(C), 177–185. DOI: https://doi.org/10.1016/0040-6031(92)85194-Z.
- Akahira, T.; Sunose, T.; Joint Convention of Four Electrical Institutes. Sci. Educ. Technol. 1971, 161971, 22–31. DOI:https://doi.org/10.1021/i200014a015.
- Wibowo, E. S.; Park, B.-D. Determination of Crystallinity of Thermosetting Urea-Formaldehyde Resins Using Deconvolution Method. Macromol. Res. 2020, (No. March). DOI: https://doi.org/10.1007/s13233-020-8076-2.
- KS. KS F3101: Plywood. F3101, 2016.
- Motawie, A. M.; Madany, M. M.; El-Dakrory, A. Z.; Osman, H. M.; Ismail, E. A.; Badr, M. M.; El-Komy, D. A.; Abulyazied, D. E. Physico-Chemical Characteristics of Nano-Organo Bentonite Prepared Using Different Organo-Modifiers. Egypt. J. Pet. 2014, 23(3), 331–338. DOI: https://doi.org/10.1016/j.ejpe.2014.08.009.
- Şahin, Ö.; Kaya, M.; Saka, C. Plasma-Surface Modification on Bentonite Clay to Improve the Performance of Adsorption of Methylene Blue. Appl. Clay Sci. 2015, 116–117, 46–53. DOI: https://doi.org/10.1016/j.clay.2015.08.015.
- Benítez, J. J.; San-Miguel, M. A.; Domínguez-Meister, S.; Heredia-Guerrero, J. A.; Structure, S. M. Chemical State of Octadecylamine Self-Assembled Monolayers on Mica. J. Phys. Chem. C. 2011, 115(40), 19716–19723. DOI: https://doi.org/10.1021/jp203871g.
- Čapková, P.; Pospíšil, M.; Valášková, M.; Měřínská, D.; Trchová, M.; Sedláková, Z.; Weiss, Z.; Šimoník, J. Structure of Montmorillonite Cointercalated with Stearic Acid and Octadecylamine: Modeling, Diffraction, IR Spectroscopy. J. Colloid Interface Sci. 2006, 300(1), 264–269. DOI: https://doi.org/10.1016/j.jcis.2006.03.033.
- Kaufhold, S.; Dohrmann, R.; Koch, D.; Houben, G. The PH of Aqueous Bentonite Suspensions. Clays Clay Miner. 2008, 56(3), 338–343. DOI: https://doi.org/10.1346/CCMN.2008.0560304.
- Jeong, B.; Park, B.-D. Effect of Molecular Weight of Urea–Formaldehyde Resins on Their Cure Kinetics, Interphase, Penetration into Wood, and Adhesion in Bonding Wood. Wood Sci. Technol. 2019, 53(3), 665–685. DOI: https://doi.org/10.1007/s00226-019-01092-1.
- Lubis, M. A. R.; Park, B. D. Modification of Urea-Formaldehyde Resin Adhesives with Oxidized Starch Using Blocked PMDI for Plywood. J. Adhes. Sci. Technol. 2018, 32(24), 2667–2681. DOI: https://doi.org/10.1080/01694243.2018.1511075.
- Lubis, M. A. R.; Park, B.-D.; Influence of Initial Molar Ratios on the Performance of Low Molar Ratio Urea-Formaldehyde Resin Adhesives. J. Korean Wood Sci. Technol. 2020, 482, 136~153. DOI:https://doi.org/10.5658/WOOD.2020.48.2.136.
- Nuryawan, A.; Park, B. D.; Singh, A. P. Comparison of Thermal Curing Behavior of Liquid and Solid Urea-Formaldehyde Resins with Different Formaldehyde/Urea Mole Ratios. J. Therm. Anal. Calorim. 2014, 118(1), 397–404. DOI: https://doi.org/10.1007/s10973-014-3946-5.
- Siimer, K.; Kaljuvee, T.; Christjanson, P. Thermal Behaviour of Urea-Formaldehyde Resins during Curing. J. Therm. Anal. Calorim. 2003, 72(2), 607–617. DOI: https://doi.org/10.1023/A:1024590019244.
- Vyazovkin, S.; Sbirrazzuoli, N. Isoconversional Kinetic Analysis of Thermally Stimulated Processes in Polymers. Macromol. Rapid Commun. 2006, 27(18), 1515–1532. DOI: https://doi.org/10.1002/marc.200600404.
- Zorba, T.; Papadopoulou, E.; Hatjiissaak, A.; Paraskevopoulos, K. M.; Chrissafis, K. Urea-Formaldehyde Resins Characterized by Thermal Analysis and FTIR Method. J. Therm. Anal. Calorim. 2008, 92(1), 29–33. DOI: https://doi.org/10.1007/s10973-007-8731-2.
- Park, B.-D.; Kim, Y. S.; Singh, A. P.; Lim, K. P. Reactivity, Chemical Structure, and Molecular Mobility of Urea–Formaldehyde Adhesives Synthesized under Different Conditions Using FTIR and Solid-State 13C CP/MAS NMR Spectroscopy. J. Appl. Polym. Sci. 2003, 88, 2677–2687. DOI: https://doi.org/10.1002/app.12115.
- Zanetti, M.; Lomakin, S.; Camino, G. Polymer Layered Silicate Nanocomposites. Macromol. Mater. Eng. 2000, 279(1), 1–9. DOI: https://doi.org/10.1002/1439-2054(20000601)279:1<1::AID-MAME1>3.0.CO;2-Q.
- Salari, A.; Tabarsa, T.; Khazaeian, A.; Saraeian, A. Effect of Nanoclay on Some Applied Properties of Oriented Strand Board (OSB) Made from Underutilized Low Quality Paulownia (Paulownia Fortunei) Wood. J. Wood Sci. 2012, 58(6), 513–524. DOI: https://doi.org/10.1007/s10086-012-1278-2.