References
- Karbhari, V. Rehabilitation of Metallic Civil Infrastructure Using Fiber Reinforced Polymer (FRP) Composites; WOODHEAD PUBLISHING: Cambridge, UK, 2014; pp 3–10. DOI: https://doi.org/10.1533/9780857096654.1.3.
- Rasane, A.; Kumar, P.; Khond, M. Optimizing the Size of a CFRP Patch to Repair a Crack in a Thin Sheet. J. Adhes. 2017, 93(13), 1064–1080. DOI: https://doi.org/10.1080/00218464.2016.1204236.
- Matthews, N., . Aircraft Sustainment and Repair; Butterworth heinemann: UK, 2018; pp 845–862. DOI: https://doi.org/10.1016/B978-0-08-100540-8.00015-7.
- Kundu, S.; Jones, R.; Peng, D.; Matthews, N.; Alankar, A.; Raman, S. R.; Huang, P. Review of Requirements for the Durability and Damage Tolerance Certification of Additively Manufactured Aircraft Structural Parts and AM Repairs. Materials. 2020, 13(6), 1341. DOI: https://doi.org/10.3390/ma13061341.
- Alemdar, F.; Gangel, R.; Matamoros, A.; Bennett, C.; Barrett-Gonzalez, R.; Rolfe, S.; Liu, H. Use of CFRP Overlays to Repair Fatigue Damage in Steel Plates under Tension Loading. J. Compos. Constr. 2014, 18(4), 04013052. DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000368.
- Yu, -Q.-Q.; Chen, T.; Gu, X.-L.; Zhang, N.-X. Fatigue Behaviour of CFRP Strengthened Out-of-Plane Gusset Welded Joints with Double Cracks. Polymers. 2015, 7(9), 1617–1637. DOI: https://doi.org/10.3390/polym7091475.
- Imanaka, M.; Ishii, K.; Hara, K.; Ikeda, T.; Kouno, Y. Fatigue Crack Propagation Rate of CFRP/aluminum Adhesively Bonded DCB Joints with Acrylic and Epoxy Adhesives. Int. J. Adhes. Adhes. 2018, 85, 149–156. DOI: https://doi.org/10.1016/j.ijadhadh.2018.06.003.
- Shinde, P.; Kumar, P.; Singh, K.; Tripathi, V.; Sarkar, P. Experimental Study of CFRP Patches Bonded on a Cracked Aluminum Alloy Panel. Compos. Interfaces. 2015, 22(4), 233–248. DOI: https://doi.org/10.1080/15685543.2015.1012426.
- El-Emam, H. M.; Salim, H. A.; Sallam, H. E. Composite Patch Configuration and Prestress Effect on SIFs for Inclined Cracks in Steel Plates. J. Struct. Eng. 2017, 143(5), 04016229. DOI: https://doi.org/10.1061/(ASCE)ST.1943-541X.0001727.
- El-Emam, H. M.; Salim, H. A.; Sallam, H. E.-D. M. Composite Patch Configuration and Prestraining Effect on Crack Tip Deformation and Plastic Zone for Inclined Cracks. J. Compos. Constr. 2016, 20(4), 04016002. DOI: https://doi.org/10.1061/(ASCE)CC.1943-5614.0000655.
- Abd-Elhady, A. A.; Sallam, H. E.-D. M.; Alarifi, I. M.; Malik, R. A.; El-Bagory, T. M. Investigation of Fatigue Crack Propagation in Steel Pipeline Repaired by Glass Fiber Reinforced Polymer. Compos. Struct. 2020, 242, 112189. DOI: https://doi.org/10.1016/j.compstruct.2020.112189.
- Solmaz, M. Y.; Topkaya, T. Progressive Failure Analysis in Adhesively, Riveted, and Hybrid Bonded Double-Lap Joints. J. Adhes. 2013, 89(11), 822–836. DOI: https://doi.org/10.1080/00218464.2013.765800.
- Marannano, G.; Zuccarello, B. Static Strength and Fatigue Life of Optimized Hybrid Single Lap aluminum–CFRP Structural Joints. J. Adhes. 2018, 94(7), 501–528. DOI: https://doi.org/10.1080/00218464.2017.1291349.
- Floros, I.; Tserpes, K. Numerical Simulation of Quasi-static and Fatigue Debonding Growth in Adhesively Bonded Composite Joints Containing Bolts as Crack Stoppers. J. Adhes. 2019, 1–23. DOI: https://doi.org/10.1080/00218464.2019.1690473.
- Abu-Sinna, A.; Abd-Elhady, A. A.; Atta, M.; Sallam, H. E.-D. M. The Failure Stages of Bolted Double-lap Metallic Joints: Experimental Study. J. Braz. Soc. Mech. Sci. Eng. 2018, 40(8), 388. DOI: https://doi.org/10.1007/s40430-018-1314-2.
- Atta, M.; Abd-Elhady, A.; Abu-Sinna, A.; Sallam, H. Prediction of Failure Stages for Double Lap Joints Using Finite Element Analysis and Artificial Neural Networks. Eng. Fail. Anal. 2019, 97, 242–257. DOI: https://doi.org/10.1016/j.engfailanal.2019.01.042.
- Abd-Elhady, A.; Abu-Sinna, A.; Atta, M.; Sallam, H. E.-D. M. Identification of Damage Stages in Bolted Metallic Joints for Different Joint Geometries and Tightening Torques Using Statistical Analysis. Adv. Struct. Eng. 2020, 23(5), 911–923. DOI: https://doi.org/10.1177/1369433219886081.
- Abd-Elhady, A. A.; Sallam, H. E.-D. M. Crack Sensitivity of Bolted Metallic and Polymeric Joints. Eng. Fract. Mech. 2015, 147, 55–71. DOI: https://doi.org/10.1016/j.engfracmech.2015.08.005.
- Abd-Elhady, A. A.;. Effect of Clamping Force and Coefficient of Friction on the Elastic-plastic Behavior of Cracked Bolted Joint. Ain. Shams. Eng. J. 2018, 9(4), 3113–3122. DOI: https://doi.org/10.1016/j.asej.2018.04.001.
- Chakherlou, T.; Zehsaz, M.; Samaei, M. Experimental Investigation of the Effects of Clamping Force on the Fatigue Life and Fatigue Crack Growth of Single Lap Simple Bolted and Hybrid (Bolted/adhesive) Joints. Transactions of the Indian Institute of Metals. 2016, 69(7), 1335–1341. DOI: https://doi.org/10.1007/s12666-015-0684-8.
- Gamdani, F.; Boukhili, R.; Vadean, A. Tensile Behavior of Hybrid Multi-bolted/bonded Joints in Composite Laminates. Int. J. Adhes. Adhes. 2019, 95, 102426. DOI: https://doi.org/10.1016/j.ijadhadh.2019.102426.
- Fu, M.; Mallick, P. Fatigue of Hybrid (Adhesive/bolted) Joints in SRIM Composites. Int. J. Adhes. Adhes. 2001, 21(2), 145–159. DOI: https://doi.org/10.1016/S0143-7496(00)00047-6.
- Simulia, D. S.;. Abaqus Analysis User’s Manual; Dassault Systemes: Pawtucket, USA, 2010.
- Doghri, I.;. Fully Implicit Integration and Consistent Tangent Modulus in Elasto-plasticity. Int. J. Numer. Methods Eng. 1993, 36(22), 3915–3932. DOI: https://doi.org/10.1002/nme.1620362210.
- Ju, S.-H.; Fan, C.-Y.; Wu, G. Three-dimensional Finite Elements of Steel Bolted Connections. Eng. Struct. 2004, 26(3), 403–413. DOI: https://doi.org/10.1016/j.engstruct.2003.11.001.
- Kulak, G.; Fisher, J.; Struik, J. Guide to Design Criteria for Bolted and Riveted Joints, American Institute of Steel Construction. Inc.: Chicago, 2001. https://doi.org/10.1115/1.2829467
- Ferrero, J.-F.; Yettou, E.; Barrau, -J.-J.; Rivallant, S. Analysis of a Dry Friction Problem under Small Displacements: Application to a Bolted Joint. Wear. 2004, 256(11–12), 1135–1143. DOI: https://doi.org/10.1016/j.wear.2003.07.003.
- Ireman, T.;. Three-dimensional Stress Analysis of Bolted Single-lap Composite Joints. Compos. Struct. 1998, 43(3), 195–216. DOI: https://doi.org/10.1016/S0263-8223(98)00103-2.
- Tserpes, K. I.; Papanikos, P.; Kermanidis, T., . A Three-dimensional Progressive Damage Model for Bolted Joints in Composite Laminates Subjected to Tensile Loading. Fatigue &Fracture of Engineering Materials and Structures. 2001, 24(10), 663–675. DOI: https://doi.org/10.1046/j.1460-2695.2001.00424.x.