References
- Dilger, K. Automobiles - Adhesive Bonding - 16. Adhesive Bonding. 2005, 39(2), 357–385. DOI: https://doi.org/10.1136/bmj.2.1669.1408.
- Hart-Smith, L. J. Aerospace. Adhesive Bonding: Science, Technology and Applications; Woodhead publishing Ltd: Cambridge, 2005; pp 489–527.
- Silva da, L. F. M.; Ochsner, A. Adams RD.Handbook of Adhesion Technology; Springer: Berlin Heidelberg, 2011.
- Ashcroft, I. A.; Comyn, J.; Mubashar, A. Effect of Water and Mechanical Stress on Durability. HAT. 2018, 879–914, Second edition. DOI: https://doi.org/10.1007/978-3-642-01169-6_31.
- Brewis, D. M.; Comyn, J.; Shalash, R. J. A. The Effect of Moisture and Temperature on the Properties of an Epoxide-polyamide Adhesive in Relation to Its Performance in Single Lap Joints. Int. J. Adhes. Adhes. 1982, 2(4), 215–222. DOI: https://doi.org/10.1016/0143-7496(82)90028-8.
- Armstrong, K. B. Long-term Durability in Water of Aluminium Alloy Adhesive Joints Bonded with Epoxy Adhesives. Int. J. Adhes. Adhes. 1997, 17(2), 89–105. DOI: https://doi.org/10.1016/S0143-7496(96)00038-3.
- Petrie, E. M. How Moisture Affects Adhesives, Sealants, and Coatings. Met. Finish. 2011, 109(7), 36–48. DOI: https://doi.org/10.1016/S0026-0576(13)70070-9.
- Banea, M. D.; Silva da, L. F. M.; Carbas, R. J. C.; Barbosa, A. Q.; de Barros, S.; Viana, G. Effect of Water on the Behaviour of Adhesives Modified with Thermally Expandable Particles. Int. J. Adhes. Adhes. 2018, 84, 250–256. DOI: https://doi.org/10.1016/j.ijadhadh.2018.04.002.
- Zhang, Y.; Adams, R. D.; Silva da, L. F. M. Absorption and Glass Transition Temperature of Adhesives Exposed to Water and Toluene. Int. J. Adhes. Adhes. 2014, 50, 85–92. DOI: https://doi.org/10.1016/j.ijadhadh.2014.01.022.
- Carbas, R. J. C.; Silva da, L. F. M.; Critchlow, G. W. Effect of Post-cure on Adhesively Bonded Functionally Graded Joints by Induction Heating. PIME, Desi. Applic. 2014, 229(5), 419–430. DOI: https://doi.org/10.1177/1464420714523579.
- Han, X.; Chao, Y.; Zhang, W.; Chao, Y.; Wu, C. Study on the Effect of Post Curing on the Mode II Fracture Energy of Structural Adhesive Using a Parameter Identification Approach. Int. J. Adhes. Adhes. 2019, 95, 352–398. DOI: https://doi.org/10.1016/j.ijadhadh.2019.102398.
- Han, X.; Jin, Y.; Zhang, W.; Hou, W.; Yu, Y. Characterisation of Moisture Diffusion and Strength Degradation in an Epoxy-based Structural Adhesive considering a Post-curing Process. J. Adhes. Sci. Tech. 2018, 32(15), 1643–1657. DOI: https://doi.org/10.1080/01694243.2018.1436876.
- Mubashar, A.; Ashcroft, I. A.; Critchlow, G. W.; Crocombe, A. D. Moisture Absorption–desorption Effects in Adhesive Joints. Int. J. Adhes. Adhes. 2009, 29(8), 751–760. DOI: https://doi.org/10.1016/j.ijadhadh.2009.05.001.
- Yao, L.; Xia, Y.; Zhou, Q. A Study on Hygrothermal Degradation and Recovery of an Epoxy Adhesive Using Molecular Dynamics Simulation. J. Adhes. Sci. Tech. 2015, 29(8), 753–766. DOI: https://doi.org/10.1080/01694243.2014.1003767.
- Ashcroft, I. A.; Comyn, J. Effect of Water and Mechanical Stress on Durability. Handbook Adhes. Tech. 2011, 787–822.
- Moura, M. F. S. F.; Campilho, R. D. S. G.; Gonçalves, J. P. M. Pure Mode II Fracture Characterization of Composite Bonded Joints. Int. J. Solids. Struct. 2009, 46(6), 1589–1595. DOI: https://doi.org/10.1016/j.ijsolstr.2008.12.001.
- Blackman, B. R. K.; Johnsen, B. B.; Kinloch, A. J.; Teo, W. S. The Effects of Pre-Bond Moisture on the Fracture Behaviour of Adhesively-Bonded Composite Joints. J. Adhes. 2008, 84(3), 256–276. DOI: https://doi.org/10.1080/00218460801954391.
- Wylde, J. W.; Spelt, J. K. Measurement of Adhesive Joint Fracture Properties as a Function of Environmental Degradation. Int. J. Adhes. Adhes. 1998, 18(4), 237–246. DOI: https://doi.org/10.1016/s0143-7496(98)00028-1.
- Loh, W. K.; Crocombe, A. D.; Abdel Wahab, M. M.; Ashcroft, I. A. Environmental Degradation of the Interfacial Fracture Energy in an Adhesively Bonded Joint. Eng. Fract. Mech. 2002, 69(18), 2113–2128. DOI: https://doi.org/10.1016/S0013-7944(02)00004-8.
- Sugiman, S.; Crocombe, A. D.; Aschroft, I. A. The Fatigue Response of Environmentally Degraded Adhesively Bonded Aluminium Structures. Int. J. Adhes. Adhes. 2013, 41, 80–91. DOI: https://doi.org/10.1016/j.ijadhadh.2012.10.003.
- Sugiman, S.; Crocombe, A. D.; Aschroft, I. A. Modelling the Static Response of Unaged Adhesively Bonded Structures. Eng. Fract. Mech. 2013, 98, 296–314. DOI: https://doi.org/10.1016/j.engfracmech.2012.10.014.
- Han, X.; Crocombe, A. D.; Anwar, S. N. R.; Hu, P.; Li, W. D. The Effect of a Hot–Wet Environment on Adhesively Bonded Joints under a Sustained Load. J. Adhes. 2014, 90(5–6), 420–436. DOI: https://doi.org/10.1080/00218464.2013.853176.
- Bordes, M.; Davies, P.; Cognard, J.-Y.; Sohier, L.; Sauvant-Moynot, V.; Galy, J. Prediction of Long Term Strength of Adhesively Bonded Steel/epoxy Joints in Sea Water. Int. J. Adhes. Adhes. 2009, 29(6), 595–608. DOI: https://doi.org/10.1016/j.ijadhadh.2009.02.013.
- Fernandes, R. L.; Silva da, L. F. M.; Moreira, R. D. F. Effect of Moisture on Pure Mode I and II Fracture Behaviour of Composite Bonded Joints. Int. J. Adhes. Adhes. 2016, 68, 30–38. DOI: https://doi.org/10.1016/j.ijadhadh.2016.01.010.
- Johar, M.; Wong, K. J.; Tamin, M. N. Non-Fickian Absorption Characteristics of Adhesive Joints: Capillary Effects and Residual Properties. Int. J. Integr. Eng. 2018, 10, 5. DOI: https://doi.org/10.30880/ijie.2018.10.05.006.
- Han, X.; Akhmet, G.; Hu, P.; Hou, W.; Baubekov, Y.; Akhmetov, M. Numerical Prediction on the Mechanical Degradation of Adhesively Bonded Corrugated Sandwich Beam after Hygrothermal Ageing. Compos. Struct. 2020, 241(1), 112–131. DOI: https://doi.org/10.1016/j.compstruct.2020.112131.
- Liljedahl, C. D. M.; Crocombe, A. D.; Wahab, M. A.; Ashcroft, I. A. Modelling the Environmental Degradation of the Interface in Adhesively Bonded Joints Using a Cohesive Zone Approach. J. Adhes. 2006, 82(11), 1061–1089. DOI: https://doi.org/10.1080/00218460600948495.
- Han, X.; Crocombe, A. D.; Anwar, S. N. R.; Hu, P. The Strength Prediction of Adhesive Single Lap Joints Exposed to Long Term Loading in a Hostile Environment. Int. J. Adhes. Adhes. 2014, 55, 1–11. DOI: https://doi.org/10.1016/j.ijadhadh.2014.06.013.
- Moura, M. F. S. F.; Morais, J. J. L.; Dourado, N. A New Data Reduction Scheme for Mode I Wood Fracture Characterization Using the Double Cantilever Beam Test. Eng. Fract. Mech. 2008, 75(13), 3852–3865. DOI: https://doi.org/10.1016/j.tafmec.2008.01.005.
- Costa, M.; Viana, G.; Créac’hcadec, R.; da Silva, L. F. M.; Campilho, R. D. S. G. A Cohesive Zone Element for Mode I Modelling of Adhesives Degraded by Humidity and Fatigue. Int. J. Fatigue. 2018, 112, 173–182. DOI: https://doi.org/10.1016/j.ijfatigue.2018.03.014.
- Liu, S.; Cheng, X.; Zhang, Q.; Zhang, J.; Bao, J.; Guo, X. An Investigation of Hygrothermal Effects on Adhesive Materials and Double Lap Shear Joints of CFRP Composite Laminates. Compos. B Eng. 2016, 91, 431–440. DOI: https://doi.org/10.1016/j.compositesb.2016.01.051.