Crack-arresting behavior of adhesively bonded joints with a single rectangular convex/concave shape formed on adherend surfaces

References

• Hirose, Y.; Hojo, M.; Fujiyoshi, A.; Matsubara, G. Suppression of Interfacial Crack for Foam Core Sandwich Panel with Crack Arrester. Adv. Compos. Mater. 2007, 16(1), 11–30. DOI: 10.1163/156855107779755309.
   Web of Science ®Google Scholar
• Tserpes, K. I.; Peikert, G.; Floros, I. S. Crack Stopping in Composite Adhesively Bonded Joints through Corrugation. Theor. Appl. Fract. Mech. 2016, 83, 152–157. DOI: 10.1016/j.tafmec.2015.10.003.
   Web of Science ®Google Scholar
• Löbel, T.; Holzhüter, D.; Sinapius, M.; Hühne, C.; Hybrid Bondline, A. Concept for Bonded Composite Joints. Int. J. Adhes. Adhes. 2016, 68, 229–238. DOI: 10.1016/j.ijadhadh.2016.03.025.
   Web of Science ®Google Scholar
• Moroni, F.; Pirondi, A. Technology of Rivet: Adhesive Joints. In Hybrid Adhesive Joints; da Silva, L. F. M., Pirondi, A., Öchsner, A., Eds.; Springer: Berlin, 2011; Vol. 6, pp 79–108.
   Google Scholar
• Floros, I.; Tserpes, K. Numerical Simulation of Quasi-static and Fatigue Debonding Growth in Adhesively Bonded Composite Joints Containing Bolts as Crack Stoppers. J. Adhes. 2021, 97(7), 611–633. DOI: 10.1080/00218464.2019.1690473.
   Web of Science ®Google Scholar
• Matsuzaki, R.; Shibata, M.; Todoroki, A. Reinforcing an Aluminum/GFRP Co-cured Single Lap Joint Using Inter-adherend Fiber. Compos. A. 2008, 39(5), 786–795. DOI: 10.1016/j.compositesa.2008.02.002.
   Web of Science ®Google Scholar
• Kruse, T.; Körwien, T.; Heckner, S.; Geistbeck, M. Bonding of CFRP Primary Aerospace Structures–Crackstopping in Composite Bonded Joints under Fatigue. Presented at the 20th International Conference on Composite Materials, Copenhagen, Jul 19–24, 2015; Paper 2219-1.
   Google Scholar
• Minakuchi, S. Fiber-reinforcement-based Crack Arrester for Composite Bonded Joints. Presented at the 20th International Conference on Composite Materials, Copenhagen, Jul 19–24, 2015; Paper 2118-4.
   Google Scholar
• Parkes, P. N.; Butler, R.; Meyer, J.; de Oliveira, A. Static Strength of Metal-composite Joints with Penetrative Reinforcement. Compos. Struct. 2014, 118, 250–256. DOI: 10.1016/j.compstruct.2014.07.019.
   Web of Science ®Google Scholar
• Graham, D. P.; Rezai, A.; Baker, D.; Smith, P. A.; Watts, J. F. The Development and Scalability of a High Strength, Damage Tolerant, Hybrid Joining Scheme for Composite–Metal Structures. Compos. A. 2014, 64, 11–24. DOI: 10.1016/j.compositesa.2014.04.018.
   Web of Science ®Google Scholar
• Tu, W.; Wen, P. H.; Hogg, P. J.; Guild, F. J. Optimisation of the Protrusion Geometry in Comeld™ Joints. Compos. Sci. Technol. 2011, 71(6), 868–876. DOI: 10.1016/j.compscitech.2011.02.001.
   Web of Science ®Google Scholar
• Schollerer, M. J.; Kosmann, J.; Völkerink, O.; Holzhüter, D.; Hühne, C. Surface Toughening – A Concept to Decrease Stress Peaks in Bonded Joints. J. Adhes. 2019, 95(5–7), 495–514. DOI: 10.1080/00218464.2018.1555041.
   Web of Science ®Google Scholar
• Morano, C.; Zavattieri, P.; Alfano, M. Tuning Energy Dissipation in Damage Tolerant Bio-inspired Interfaces. J. Mech. Phys. Solids. 2020, 141, 103965. DOI: 10.1016/j.jmps.2020.103965.
   Web of Science ®Google Scholar
• Sun, F.; Pruncu, C. I.; Penchev, P.; Jiang, J.; Dimov, S.; Blackman, B. R. K. Influence of Surface Micropatterns on the Mode I Fracture Toughness of Adhesively Bonded Joints. Int. J. Adhes. Adhes. 2020, 103, 102718. DOI: 10.1016/j.ijadhadh.2020.102718.
   Web of Science ®Google Scholar
• Kin Loch, A. J.; Shaw, S. J. The Fracture Resistance of a Toughened Epoxy Adhesive. J. Adhes. 1981, 12(1), 59–77. DOI: 10.1080/00218468108071189.
   Web of Science ®Google Scholar
• Kanani, A. Y.; Hou, X.; Ye, J. The Influence of Notching and Mixed-adhesives at the Bonding Area on the Strength and Stress Distribution of Dissimilar Single-lap Joints. Compos. Struct. 2020, 241, 112136. DOI: 10.1016/j.compstruct.2020.112136.
   Web of Science ®Google Scholar
• Shang, X.; Marques, E. A. S.; Machado, J. J. M.; Carbas, R. J. C.; Jiang, D.; da Silva, L. F. M. A Strategy to Reduce Delamination of Adhesive Joints with Composite Substrates. Proc. Inst. Mech. Eng. Part L. 2019, 233(3), 521–530. DOI: 10.1177/1464420718805712.
   Web of Science ®Google Scholar
• ASTM International. ASTM D5528-01(2007)e3, Standard Test Method for Mode I Interlaminar Fracture Toughness of Unidirectional Fiber-Reinforced Polymer Matrix Composites; ASTM International: West Conshohocken, PA, 2007.
   Google Scholar
• Yasuoka, T. Moisture Absorption and Mechanical Characteristics of Adhesively-bonded Joints in Aircraft. Presented at the 63rd Lecture on Structural Strength, Tokyo, Aug 4–6, 2021; Paper 3D08 (in Japanese).; Paper 3D08 (in Japanese).
   Google Scholar
• Dos Santos, D. G.; Carbas, R. J. C.; Marques, E. A. S.; da Silva, L. F. M. Reinforcement of CFRP Joints with Fibre Metal Laminates and Additional Adhesive Layers. Compos. Part B. 2019, 165, 386–396. DOI: 10.1016/j.compositesb.2019.01.096.
   Web of Science ®Google Scholar
• Battelle Memorial Institute. Metallic Materials Properties Development and Standardization: MMPDS-11; Battelle Memorial Institute: Columbus, OH, USA, 2016; p C5–59 and C5–77.
   Google Scholar
• Irwin, G. Fracture. In Elasticity and Plasticity; Flügge, S., Ed.; Springer: Berlin, 1958; Vol. 6, pp 551–590.
   Google Scholar
• Krueger, R. Virtual Crack Closure Technique: History, Approach, and Applications. Appl. Mech. Rev. 2004, 57(2), 109–143. DOI: 10.1115/1.1595677.
   Google Scholar
• Camanho, P. P.; Dávila, C. G. Mixed-Mode Decohesion Finite Elements for the Simulation of Delamination in Composite Materials; NASA/TM-2002-211737; NASA Langley Research Center: VA, USA, 2002.
   Google Scholar
• Schollerer, M. J.; Kosmann, J.; Holzhüter, D.; Bello-Larroche, C.; Hühne, C. Surface Toughening – An Industrial Approach to Increase the Robustness of Pure Adhesive Joints with Film Adhesives. Proc. Inst. Mech. Eng. Part G. 2020, 234(13), 1980–1987. DOI: 10.1177/0954410020950071.
   Web of Science ®Google Scholar
• Campilho, R. D. S. G.; Moura, D. C.; Banea, M. D.; da Silva, L. F. M. Adherend Thickness Effect on the Tensile Fracture Toughness of a Structural Adhesive Using an Optical Data Acquisition Method. Int. J. Adhes. Adhes. 2014, 53, 15–22. DOI: 10.1016/j.ijadhadh.2014.01.015.
   Web of Science ®Google Scholar
• Park, S.; Dillard, D. A. Development of a Simple Mixed-mode Fracture Test and the Resulting Fracture Energy Envelope for an Adhesive Bond. Int. J. Fract. 2007, 148, 261–271. DOI: 10.1007/s10704-008-9200-z.
   Web of Science ®Google Scholar