References
- Food and Agriculture Organization. FAOSTAT, https://www.fao.org/faostat/en/#home (accessed December 13, 2021).
- Killmann, W.; Fink, D. Coconut Palm Stem Processing – Technical Handbook; Deutsche Gesellschaft für Technische Zusammenarbeit (GTZ) GmbH: Germany, 1996; pp 206.
- Frühwald, A.; Peek, R. D.; Schulte, M. Utilization of Coconut Timber from North Sulawesi, Indonesia; Federal Research Center of Forestry and Forest Products: Hamburg, 1992; pp 352.
- Rumbayan, R.; Kandou, C. D. E.; Wala, M. M.; Tombeg, B. A. The Development of Traditional Wooden House Using Local Coco Wood Waste as Strategy for Facing Earthquakes. IOP Conference Series: Earth and Environmental Science. 2021, 739(1), 012032. DOI: https://doi.org/10.1088/1755-1315/739/1/012032.
- Hasemann, D. Herstellung und Untersuchung der Eigenschaften von Massivholzplatten aus Kokospalmenholz (Cocos nucifera L.); Diplomarbeit: Universität Hamburg: Germany, 2011.
- Srivaro, S.; Duong HAL, P. Z.; Lim, H.; Jantawee, S.; Tomad, J.; Tomad, J. Physical, Mechanical and Thermal Properties of Cross Laminated Timber Made with Coconut Wood. Eur. J. Wood Wood Prod. 2021, 79(6), 1519–1529. DOI: https://doi.org/10.1007/s00107-021-01741-y.
- Fathi, L. Structural and Mechanical Properties of the Wood from Coconut Palms, Oil Palms and Date Palms. Ph.D. Thesis: University of Hamburg: Germany; 2014. 248 p.
- Srivaro, S.; Tomad, J.; Shi, J.; Cai, J. Characterization of Coconut (Cocos Nucifera) Trunk’s Properties and Evaluation of Its Suitability to Be Used as Raw Material for Cross Laminated Timber Production. Constr. Build. Mater. 2020, 254, 119291. DOI: https://doi.org/10.1016/j.conbuildmat.2020.119291.
- Fathi, L.; Frühwald, A. The Role of Vascular Bundles on the Mechanical Properties of Coconut Palm Wood. Wood Mater. Sci. Eng. 2014, 9(4), 214–223. DOI: https://doi.org/10.1080/17480272.2014.887774.
- Sulc, V. K. Mechanical Properties of Coconut Palm Wood. Regional Coconut Wood Training Program RAS/81/10; FAO/UNIDO: Zamboanga, Philippines, 1983. pp 62.
- Paulitsch, M.; Barbu, M. C. Holzwerkstoffe der Moderne; DRW-Verlag: Leinfelden-Echterdingen, 2015; pp 516.
- Wardhani, I. Y.; Surjokusumo, S.; Hadi, Y. S.; Nugroho, N. Distribution of Chemical Compounds of Coconut Wood (Cocos Nucifera L). J Trop Wood Sci Technol. 2004, 2(1), 1–7. DOI:https://doi.org/10.51850/jitkt.v2i1.313.
- Poulter, R.; Hopewell, G. Secondary Coco Wood Products - Potting Mix; Department of Employment, Economic Development and Innovation, Australian Centre for International Agricultural Research: Queensland, 2010.
- Bodîrlău, R.; Teacă, C. A.; Spiridon, I. Chemical Modification of Beech Wood: Effect on Thermal Stability. BioResources. 2008, 3(3), 789–900. DOI: https://doi.org/10.15376/biores.3.3.789-800.
- Chaowana, P. Acidity and Solubility of Rubberwood and Their Impacts on the Curing Behaviour of urea-formaldehyde Resin. J. Trop. Forest Sci. 2016, 28(1), 32–38.
- Bockel, S.; Mayer, I.; Konnerth, J.; Harling, S.; Niemz, P.; Swaboda, C.; Beyer, M.; Bieri, N.; Weiland, G.; Pichelina, F. The Role of Wood Extractives in Structural Hardwood Bonding and Their Influence on Different Adhesive Systems. Int. J. Adhes. Adhes. 2019, 91, 43–53. DOI: https://doi.org/10.1016/j.ijadhadh.2019.03.001.
- Tamolang, F. B. Variation in Bending Strength Properties of glued-laminated Coconut Wood. For Prod Res Dev Inst J 1989, 18(1–4), 62–77.
- McLaughlan, J. M. Glue Line Shear Test on Coconut Palm Timbers; New Zealand: Forest Research Institute, 1974. Fiber note 51/5/2
- Melencion, N. J. Determination of appropriate gluing parameters for lamination of coconut (Cocos nucifera L.) wood. M.Sc. Thesis, University of the Philippines: Philippines; 1997.
- Humphrey, P. E. A Protocol for ABES Testing of Adhesive Bond Strength Development Dynamics; Adhesive Evaluation Systems, Inc.: Oregon, 2009.
- Humphrey, P. E. Device for Testing Adhesive Bonds. United States Patent USP 5176028; 1993.
- Humphrey, P. E. Outline Standard for Adhesion Dynamics Evaluation Employing the ABES (Automated Bonding Evaluation System) Technique. In: 2009 International conference on wood adhesives proceedings, Nevada, USA. pp 203–213; 2009.
- Frihart, C. R.;. Wood Adhesion and Adhesives. In Wood Chemistry and Wood Composites; Roger, M. R., Ed.; CRC Press: Florida, 2005; pp 210–273.
- Dunky, M.; Niemz, P. Holzwerkstoffe und Leime - Technologie und Einflussfaktoren; Springer-Verlag: Berlin, 2002; pp 954.
- Nuryawan, A.; Singh, A. P.; Park, B. D.; Causin, V. Micro-morphological Features of Cured urea-formaldehyde Adhesive Detected by Transmission Electron Microscopy. J. Adhes. 2016, 92(2), 121–134. DOI: https://doi.org/10.1080/00218464.2014.1003545.
- Pizzi, A. Advanced Wood Adhesives Technology; Marcel Dekker, Inc.: New York, 1994; pp 304.
- Vek, V.; Oven, P.; Poljanšek, I.; Ters, T. Contribution to Understanding the Occurrence of Extractives in Read Heart of Beech. BioResources. 2015, 10(10), 970–985. DOI: https://doi.org/10.15376/biores.10.1.970-985.
- Geffert, A.; Geffertova, J.; Dudiak, M. Direct Method of Measuring the pH Value of Wood. Forests. 2019, 10(10), 852. DOI: https://doi.org/10.3390/f10100852.
- Malanit, P.; Barbu, M. C.; Frühwald, A. The Gluability and Bonding Quality of an Asian Bamboo (Dendrocalamus Asper Backer) for the Production of Composite Lumber. J. Trop. For. Sci. 2009, 21(4), 359–366.