References
- Thiesse, F.; Wirth, M.; Kemper, H.; Moisa, M.; Morar, D.; Lasi, H.; Piller, F.; Buxmann, P.; Mortara, L.; Ford, S., et al. Economic Implications of Additive Manufacturing and the Contribution of MIS. Bus. Inf. Syst. Eng. 2015, 57(2), 139–148.
- Tofail, S.; Koumoulos, E.; Bandyopadhyay, A.; Bose, S.; O’Donoghue, L.; Charitidis, C. Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities. Mater. Today. 2018, 21(1), 22–37. DOI: 10.1016/j.mattod.2017.07.001.
- Gebhardt, A.;. Additive Manufacturing: 3D Printing for Prototyping and Manufacturing; Hanser Publishers: Munich, 2016.
- Lim, C.; Le, K.; Lu, Q.; Wong, C. An Overview of 3-D Printing in Manufacturing, Aerospace, and Automotive Industries. IEEE Potentials. 2016, 35(4), 18–22. DOI: 10.1109/MPOT.2016.2540098.
- Yang, C.; Tian, X.; Li, D.; Cao, Y.; Zhao, F.; Shi, C. Influence of Thermal Processing Conditions in 3D Printing on the Crystallinity and Mechanical Properties of PEEK Material. Journal of Materials Processing Technology. 2017, 248, 1–7. DOI: 10.1016/j.jmatprotec.2017.04.027.
- Skrzypczak, N.; Tanikella, N.; Pearce, J. Open Source high-temperature RepRap for 3-D Printing heat-sterilizable PPE and Other Applications. HardwareX. 2020, 8, e00130. DOI: 10.1016/j.ohx.2020.e00130.
- Söhling, N.; Neijhoft, J.; Nienhaus, V., Acker, V.; Harbig, J.; Menz, F.; Ochs, J.; Verboket, R. D.; Ritz, U.; Blaeser, A.; Dörsam, E.; Frank, J.; Marzi, I.; Henrich, D. 3D-Printing of Hierarchically Designed and Osteoconductive Bone Tissue Engineering Scaffolds. Materials (Basel). 2020, 13( 8).
- Zhou, Y.; Lu, H.; Wang, G.; Wang, J.; Li, W. Voxelization Modelling Based Finite Element Simulation and Process Parameter Optimization for Fused Filament Fabrication. Mater. Des. 2020, 187, 108409. DOI: 10.1016/j.matdes.2019.108409.
- Ramli, F.; Nazan, M.; Alkahari, M.; Sudin, M.; Abdullah, M. Investigation of Warping Deformation in Fused Deposition Modelling by Sago Starch Adhesion. International Conference on Design and Concurrent Engineering, Osaka, Japan 2017.
- Kujawa, M.;. The Influence of First Layer Parameters on Adhesion between the 3D Printer’s Glass Bed and ABS 2017.
- Naat, N.; Boutar, Y.; Naimi, S.; Mezlini, S.; da Silva, L. Effect of Surface Texture on the Mechanical Performance of Bonded Joints: A Review. J. Adhes. 2021, 1–93. doi:10.1080/00218464.2021.2008370.
- Spoerk, M.; Gonzalez-Gutierrez, J.; Lichal, C., Cajner, H.; Berger, G.; Schuschnigg, S.; Cardon, L.; Holzer, C. Optimisation of the Adhesion of Polypropylene-Based Materials during Extrusion-Based Additive Manufacturing. Polymers (Basel). 2018, 10.
- Spoerk, M.; Gonzalez-Gutierrez, J.; Sapkota, J.; Schuschnigg, S.; Holzer, C. Effect of the Printing Bed Temperature on the Adhesion of Parts Produced by Fused Filament Fabrication. Plast., Rubber Compos. 2018, 47(1), 17–24. DOI: 10.1080/14658011.2017.1399531.
- Bergonzi, L.; Pirondi, A.; Moroni, F.; Frascio, M.; Avalle, M. A Study on Additive Manufacturing Build Parameters as Bonded Joint Design Factors. J. Adhes. 2021, 1–30. doi:10.1080/00218464.2020.1862655.
- Carneiro, S.; Silva, A.; Gomes, R. Fused Deposition Modeling with Polypropylene. Mater. Des. 2015, 83, 768–776. DOI: 10.1016/j.matdes.2015.06.053.
- Laumann, D.; Spiehl, D.; Dörsam, E. Device for Measuring Part Adhesion in FFF Process. HardwareX 2022.
- https://www.filamentworld.de/shop/pla-filament-3d-drucker/schwarz/. accessed 23 September 2021.
- Nienhaus, V.; Smith, K.; Spiehl, D.; Dörsam, E. Investigations on Nozzle Geometry in Fused Filament Fabrication. Additive Manuf. 2019, 28, 711–718. DOI: 10.1016/j.addma.2019.06.019.
- Kim, K.; Heo, J. Effects of Temperature on the Microscale Adhesion Behavior of Thermoplastic Polymer Film. Tribol. Lett. 2010, 38(2), 97–106. DOI: 10.1007/s11249-010-9578-4.
- Lepoivre, A.; Boyard, N.; Levy, A.; Sobotka, V.; Transfer, H. Adhesion Study for the FFF Additive Manufacturing Process. Procedia Manuf. 2020, 47, 948–955. DOI: 10.1016/j.promfg.2020.04.291.
- Compton, B.; Post, B.; Duty, C.; Love, L.; Kunc, V. Thermal Analysis of Additive Manufacturing of large-scale Thermoplastic Polymer Composites. Additive Manuf. 2017, 17, 77–86. DOI: 10.1016/j.addma.2017.07.006.
- Parlevliet, P.; Bersee, H.; Beukers, A. Residual Stresses in Thermoplastic composites—A Study of the literature—Part I: Formation of Residual Stresses. Compos. Part A Appl. Sci. Manuf. 1847–57, 2006, 37.
- Mechanical Engineer’s Data Handbook; Elsevier Ltd.: Oxford, United Kingdom, 1993.
- Aiello, L.; Kovachec, G.; Brunnsteiner, B.; Schwab, M.; Gstrein, G.; Sinz, W.; Ellersdorfer, C. In Situ Measurement of Orthotropic Thermal Conductivity on Commercial Pouch Lithium-Ion Batteries with Thermoelectric Device. Batteries. 2020, 6(1), 10.
- DIN EN 28510-1, Adhesives – Peel Test for a flexible-bonded-to-rigid Test Specimen Assembly –part 1: 90° Peel; German version EN 28510-1, 2014
- DIN EN ISO/ASTM 52900, Additive Manufacturing — General Principles — Terminology, 2017