Parameters influencing the temporal behavior of adhesion on the build plate in fused filament fabrication

References

• Gebhardt, A. Additive Manufacturing: 3D Printing for Prototyping and Manufacturing; Hanser Publishers: Munich, 2016.
   Google Scholar
• Tofail, S.; Koumoulos, E.; Bandyopadhyay, A.; Bose, S.; O’Donoghue, L.; Charitidis, C. Additive Manufacturing: Scientific and Technological Challenges, Market Uptake and Opportunities. Mater. Today. 2018, 21(1), 22–37. DOI: 10.1016/j.mattod.2017.07.001.
   Web of Science ®Google Scholar
• Thiesse, F.; Wirth, M.; Kemper, H.; Moisa, M.; Morar, D.; Lasi, H.; Piller, F.; Buxmann, P.; Mortara, L.; Ford, S., et al. Economic Implications of Additive Manufacturing and the Contribution of MIS. Bus. Inf. Syst. Eng. 2015, 57(2), 139–148.
   Web of Science ®Google Scholar
• Lim, J.; Le, K.; Lu, Q.; Wong, C. An Overview of 3-D Printing in Manufacturing, Aerospace, and Automotive Industries. IEEE. Potentials. 2016, 35(4), 18–22. DOI: 10.1109/MPOT.2016.2540098.
   Google Scholar
• Yang, C.; Tian, X.; Li, D.; Cao, Y.; Zhao, F.; Shi, C. Influence of Thermal Processing Conditions in 3D Printing on the Crystallinity and Mechanical Properties of PEEK Material. J. Mat. Proc. Technol. 2017, 248, 1–7. DOI: 10.1016/j.jmatprotec.2017.04.027.
   Web of Science ®Google Scholar
• Skrzypczak, N.; Tanikella, N.; Pearce, J. Open Source High-Temperature RepRap for 3-D Printing Heat-Sterilizable PPE and Other Applications. HardwareX. 2020, 8, e00130. DOI: 10.1016/j.ohx.2020.e00130.
   PubMedGoogle Scholar
• Söhling, N.; Neijhoft, J.; Nienhaus, V.; Acker, V.; Harbig, J.; Menz, F.; Ochs, J.; Verboket, R.D.; Ritz, U.; Blaeser, A. 3D-Printing of Hierarchically Designed and Osteoconductive Bone Tissue Engineering Scaffolds. Mater. (Basel). 2020, 13(8). DOI: 10.3390/ma13081836.
   Web of Science ®Google Scholar
• Ramli, F.; Nazan, M.; Alkahari, M.; Sudin, M.; Abdullah, M. Investigation of Warping Deformation in Fused Deposition Modelling by Sago Starch Adhesion. International Conference on Design and Concurrent Engineering 2017 & Manufacturing Systems Conference 2017.
   Google Scholar
• Spoerk, M.; Gonzalez-Gutierrez, J.; Sapkota, J.; Schuschnigg, S.; Holzer, C. Effect of the Printing Bed Temperature on the Adhesion of Parts Produced by Fused Filament Fabrication. Plast. Rubber Compos. 2018, 47(1), 17–24. DOI: 10.1080/14658011.2017.1399531.
   Web of Science ®Google Scholar
• Spoerk, M.; Gonzalez-Gutierrez, J.; Lichal, C.; Cajner, H.; Berger, R.; Schuschnigg, S.; Cardon, L.; Holzer, C. Optimisation of the Adhesion of Polypropylene-Based Materials During Extrusion-Based Additive Manufacturing. Polym. (Basel). 2018, 10(5), 490.
   PubMed Web of Science ®Google Scholar
• Vasconcellos-Birro, T.; Paroissien, E.; Lachaud, F.; Aufray, M. On the Effect of Roughness Parameters on Adherence Using the Three-Point Bending Test (ISO 14679: 120227). J. Adhes. 2023, 99(3), 492–517. DOI: 10.1080/00218464.2021.2024808.
   Web of Science ®Google Scholar
• Naat, N.; Boutar, Y.; Naimi, S.; Mezlini, S.; da Silva, L. Effect of Surface Texture on the Mechanical Performance of Bonded Joints: A Review. J. Adhes. 2023, 2021(2), 166–258. DOI: 10.1080/00218464.2021.2008370.
   Google Scholar
• Laumann, D.; Spiehl, D.; Dörsam, E. Device for Measuring Part Adhesion in FFF Process. HardwareX. 2022, 11, e00258. DOI: 10.1016/j.ohx.2022.e00258.
   PubMedGoogle Scholar
• Laumann, D.; Spiehl, D.; Dörsam, E.; Blaeser, A. Interaction of Printing Speed and Temperature Settings on the Build Plate Adhesion of 3D-Printed Polylactide Acid Parts. J. Adhes. 2022, 99(7), 1186–1204. DOI: 10.1080/00218464.2022.2093640.
   Web of Science ®Google Scholar
• Kujawa, M. The Influence of First Layer Parameters on Adhesion Between the 3d Printer’s Glass Bed and ABS: Interdyscyplinarnosc Bada N Naukowych; Oficyna Wydawnicza Politechniki Wrocławskiej: Poland, 2017; 76–81.
   Google Scholar
• Culmone, C.; Smit, G.; Breedveld, P. Additive Manufacturing of Medical Instruments: A State-Of-The-Art Review. Additive. Manuf. 2019, 27, 461–473. DOI: 10.1016/j.addma.2019.03.015.
   Web of Science ®Google Scholar
• Ilyas, R.; Sapuan, S.; Harussani, M.; Hakimi, M.; Haziq, M.; Atikah, M.; Asyraf, M.R.M.; Ishak, M.R.; Razman, M.R.; Nurazzi, N.M.; Norrrahim, M.N.F. Polylactic Acid (PLA) Biocomposite: Processing, Additive Manufacturing and Advanced Applications. Polym. (Basel). 2021, 13(8), 1326.
   PubMed Web of Science ®Google Scholar
• Wickramasinghe, S.; Do, T.; Phuong, P. FDM-Based 3D Printing of Polymer and Associated Composite: A Review on Mechanical Properties, Defects and Treatments. Polym. (Basel). 2020, 12(7), 1529. DOI: 10.3390/polym12071529.
   PubMed Web of Science ®Google Scholar
• EN ISO/ASTM 52900. Additive Manufacturing –General Principles –Terminology. 2017.
   Google Scholar
• https://www.filamentworld.de/shop/pla-filament-3d-drucker/schwarz/. (accessed Oct 8, 2022).
   Google Scholar
• https://www.fiberthree.com/downloads/tdb/filaments/TDB_F3_PA_Pure_Pro.pdf. (accessed Oct 8, 2022).
   Google Scholar
• Solarski, S.; Ferreira, M.; Devaux, E. Characterization of the Thermal Properties of PLA Fibers by Modulated Differential Scanning Calorimetry. Polymer. 2005, 46(25), 11187–11192. DOI: 10.1016/j.polymer.2005.10.027.
   Web of Science ®Google Scholar
• https://www.kern.de/de/technisches-datenblatt/polyamid-pa-6?n=1102_1. (accessed Oct 8, 2022).
   Google Scholar
• Park, Y.; Ko, J.; Ahn, T.; Choe, S. Moisture Effects on the Glass Transition and the Low Temperature Relaxations in Semiaromatic Polyamides. J. Polym. Sci. B Polym. Phys. 1997, 35(5), 807–815. DOI: 10.1002/(SICI)1099-0488(19970415)35:5<807:AID-POLB9>3.0.CO;2-I.
   Web of Science ®Google Scholar
• Titone, V.; Correnti, A.; La Mantia, F. Effect of Moisture Content on the Processing and Mechanical Properties of a Biodegradable Polyester. Polym. (Basel). 2021, 13(10). DOI: 10.3390/polym13101616.
   Web of Science ®Google Scholar
• https://metallstore24.de/messing-blech-3-mm. (accessed Oct 8, 2022).
   Google Scholar
• https://www.filafarm.de/products/borosilglasplatte. (accessed Oct 8, 2022).
   Google Scholar
• https://www.filafarm.de/collections/dauerdruckplatten/products/pertiprint. (accessed Oct 8, 2022).
   Google Scholar
• Geometrical Product Specifications (GPS) – Surface texture. Profile Method – Terms, Definitions and Surface Texture Parameters (ISO 4287: 1997 + Cor 1: 1998 + Cor 2: 2005 + Amd 1: 2009); German version EN ISO 4287:1998 + AC:2008 + A1. 2019.
   Google Scholar
• https://www.sandstrahl-shop.de/strahlmittel/edelkorund/4040/edelkorund-f60-koernung-212-300?number=14279.11. (accessed Oct 8, 2022).
   Google Scholar
• https://www.sandstrahl-shop.de/strahlmittel/glasperlen/4110/glasperlen-koernung-200-300?number=14368.11. (accessed Oct 8, 2022).
   Google Scholar
• Adhesives – Peel Test for a Flexible-Bonded-To-Rigid Test Specimen Assembly – Part 1: 90° peel; German version EN 28510-1. 2014.
   Google Scholar
• https://github.com/Ultimaker/Cura/releases. (accessed Oct 8, 2022).
   Google Scholar
• Geminger, T.; Jarka, S. Injection Molding of Multimaterial Systems. In Specialized Injection Molding Techniques; Elsevier, 2016; pp. 165–210. DOI: 10.1016/B978-0-323-34100-4.00004-3
   Google Scholar
• Grubova, I.; Priamushko, T.; Surmeneva, M.; Korneva, O.; Epple, M.; Prymak, O.; Surmenev, R. Sand-Blasting Treatment as a Way to Improve the Adhesion Strength of Hydroxyapatite Coating on Titanium Implant. J. Phys.: Conf. Ser. 2017, 830, 12109. DOI: 10.1088/1742-6596/830/1/012109.
   Google Scholar
• Rudawska, A.; Danczak, I.; Müller, M.; Valasek, P. The Effect of Sandblasting on Surface Properties for Adhesion. Int. J. Adhes. Adhes. 2016, 70, 176–190. DOI: 10.1016/j.ijadhadh.2016.06.010.
   Web of Science ®Google Scholar
• Shahid, M.; Hashim, S. Effect of Surface Roughness on the Strength of Cleavage Joints. Int. J. Adhes. Adhes. 2002, 22(3), 235–244. DOI: 10.1016/S0143-7496(01)00059-8.
   Web of Science ®Google Scholar
• Clark-Monks, C.; Ellis, B. Adhesion of Polymers and Adsorption on Glass-Like Surfaces: Part I. Trans. Indian Ceram. Soc. 1969, 28(5), 23N–28N. DOI: 10.1080/0371750X.1969.10855697.
   Google Scholar
• Konstadinidis, K.; Thakkar, B.; Chakraborty, A.; Potts, L.; Tannenbaum, R.; Tirrell, M.; Evans, J.F. Segment Level Chemistry and Chain Conformation in the Reactive Adsorption of Poly(methyl Methacrylate) on Aluminum Oxide Surfaces. Langmuir. 1992, 8(5), 1307–1317.
   Web of Science ®Google Scholar
• Tamura, H.; Mita, K.; Tanaka, A.; Ito, M. Mechanism of Hydroxylation of Metal Oxide Surfaces. J. Coll. Interf. Sci. 2001, 243(1), 202–207. DOI: 10.1006/jcis.2001.7864.
   Web of Science ®Google Scholar
• Park, H.; Lee, S. Review on Interfacial Bonding Mechanism of Functional Polymer Coating on Glass in Atomistic Modeling Perspective. Polym. (Basel). 2021, 13(14). DOI: 10.3390/polym13142244.
   Web of Science ®Google Scholar
• Basin, V. Advances in Understanding the Adhesion Between Solid Substrates and Organic Coatings. Prog. Org. Coat. 1984, 12(3), 213–250. DOI: 10.1016/0033-0655(84)80010-2.
   Web of Science ®Google Scholar
• Park, H.; Lee, S.; Morin, E.; Antony, A. Roles of Paper Composition and Humidity on the Adhesion between Paper Sheet and Glass: A Molecular Dynamics Study. 2021. 10.1007/s10570-021-04268-w
   Google Scholar
• Mahapatro, A.; Singh, D. Biodegradable Nanoparticles are Excellent Vehicle for Site Directed in-Vivo Delivery of Drugs and Vaccines. J. Nanobiotechnology. 2011, 9, 55. DOI: 10.1186/1477-3155-9-55.
   PubMed Web of Science ®Google Scholar
• Wu, T.; Hu, H.; Du, Y.; Jiang, D.; Yu, B. Discrimination of Thermoplastic Polyesters by MALDI-TOF MS and Py-GC/MS. Int. J. Polym. Anal. Charact. 2014, 19(5), 441–452. DOI: 10.1080/1023666X.2014.920126.
   Web of Science ®Google Scholar
• Turku, I.; Kasala, S.; Kärki, T. Characterization of Polystyrene Wastes as Potential Extruded Feedstock Filament for 3D Printing. Recycling. 2018, 3(4), 57. DOI: 10.3390/recycling3040057.
   Google Scholar
• Davidson, J. Multiscale modelling and simulation of crosslinked polymers. dissertation, Michigan, University of Michigan; 2014.
   Google Scholar
• Takeda, S.; Fukawa, M.; Hayashi, Y.; Matsumoto, K. Surface OH Group Governing Adsorption Properties of Metal Oxide Films. Thin. Solid .Films. 1999, 339(1–2), 220–224. DOI: 10.1016/S0040-6090(98)01152-3.
   Web of Science ®Google Scholar
• Chanda, M. Introduction to Polymer Science and Chemistry: A Problem-Solving Approach, 2nd ed. CRC Press: Boca Raton, London, New York, 2013 op.
   Google Scholar