Load transfer distribution in bolted-sealed joints

References

• Atre, A.; Johnson, W. S. Analysis of the Effects of Interference and Sealant on Riveted Lap Joints. J. Aircr. 2007, 44(2), 353–364. DOI: 10.2514/1.18320.
   Web of Science ®Google Scholar
• Denkert, C.; Gerke, T.; Glienke, R.; Dörre, M.; Henkel, M. K.; Fricke, H.; Myslicki, S.; Kaufmann, M.; Voß, M.; Vallée, T. Experimental Investigations on Pre-Tensioned Hybrid Joints for Structural Steel Applications. J. Adhes. 2023, 99(2), 117–152. DOI: 10.1080/00218464.2021.2003786.
   Web of Science ®Google Scholar
• Abeln, B.; Gessler, A.; Stammen, E.; Ilg, F.; Feldmann, M.; Dilger, K.; Schuler, C. Strengthening of Fatigue Cracks in Steel Bridges by Means of Adhesively Bonded Steel Patches. J. Adhes. 2022, 98(6), 6, 827–853. DOI: 10.1080/00218464.2021.2006059.
   Web of Science ®Google Scholar
• Boni, L.; Lanciotti, A. Fatigue Behavior of Double Lap Riveted Joints Assembled with and without Interfay Sealant. Fatigue Fract. Eng. Mater. Struct. 2010, 34(1), 60–71. DOI: 10.1111/j.1460-2695.2010.01493.x.
   Web of Science ®Google Scholar
• Dechwayukul, C.; Rubin, C. A.; Hahn, G. T. Analysis of the Effects of Thin Sealant Layers in Aircraft Structural Joints. Aiaa. J. 2003, 41(11), 2216–2228. DOI: 10.2514/2.6814.
   Google Scholar
• Kamnerdtong, N., “The shear properties of a polymer sealant and analyses of the distortion and fatigue of sealed countersunk riveted lap joints”, PhD thesis, 2001.
   Google Scholar
• Hart-Smith, L. J. Design Methodology for Bonded-Bolted Composite Joints; Douglas Aircraft Company: Long Beach, California, 1982; pp AFWAL-TR-81–3154.
   Google Scholar
• Fu, M.; Mallick, P. K. Fatigue of Hybrid (Adhesive/Bolted) Joints in SRIM Composites. Int. J. Adhes. Adhes. 2001, 21(2), 145–159. DOI: 10.1016/S0143-7496(00)00047-6.
   Web of Science ®Google Scholar
• Sadowski, T.; Golewski, P.; Zarzeka-Raczkowska, E. Damage and Failure Processes of Hybrid Joints: Adhesive Bonded Aluminium Plates Reinforced by Rivets. Comput. Mater. Sci. 2011, 50(4), 1256–1262. DOI: 10.1016/j.commatsci.2010.06.022.
   Web of Science ®Google Scholar
• Bodjona, K.; Fielding, S.; Heidari-Rarani, M.; Lessard, L. Effect of Adhesive Layer Compliance on Strength of Single-Lap Hybrid Bonded-Bolted Joints. Compos. Struct. Apr 2021, 261(1), 1–9. DOI: 10.1016/j.compstruct.2020.113324.
   Google Scholar
• Kelly, G. Quasi-Static Strength and Fatigue Life of Hybrid (Bonded/Bolted) Composite Single-Lap Joints. Compos. Struct. 2006, 72(1), 119–129. DOI: 10.1016/j.compstruct.2004.11.002.
   Web of Science ®Google Scholar
• Hartman, A. Fatigue Tests on Single-Lap Joints in Clad 2024-T3 Aluminium Alloy Manufactured by a Combination of Riveting and Adhesive Bonding. NLR-TN M2170 .1966, Amsterdam (NL): NTIS.
   Google Scholar
• Paroissien, E., “Contribution aux Assemblages Hybrides (Boulonnés/Collés) – Application aux Jonctions Aéronautiques”. PhD Thesis, Université de Toulouse III Paul Sabatier (FR). 2006. http://thesesups.ups-tlse.fr/3/.
   Google Scholar
• Ramière, J. F.; Briançon, C.; Chéret, F.; Jeandrau, J. P.; Leroy, M.; Renard, J.; Thionnet, A. Jonctions hybrides boulonnées-collées. Application aux cas des structures d’avions. Revue. des. composites. et. des. matériaux. avancés. 2010, 20(2), 215–232. DOI: 10.3166/rcma.20.215-232.
   Google Scholar
• Kelly, G. Load Transfer in Hybrid (Bonded/Bolted) Composite Single-Lap Joints. Compos. Struct. 2005, 69(1), 35–43. DOI: 10.1016/j.compstruct.2004.04.016.
   Web of Science ®Google Scholar
• Bois, C.; Wargnier, H.; Wahl, J.-C.; Le Goff, E. An Analytical Model for the Strength Prediction of Hybrid (Bolted/Bonded) Composite Joints. Compos. Struct. 2013, 97, 252–260. DOI: 10.1016/j.compstruct.2012.10.022.
   Web of Science ®Google Scholar
• Bodjona, K.; Raju, K.; Lim, G. H.; Lessard, L. Load Sharing in Single-Lap Bonded/Bolted Joints, Part I: Model Development and Validation. Compos. Struct. 2015, 129, 268–275. DOI: 10.1016/j.compstruct.2015.04.040.
   Web of Science ®Google Scholar
• Bodjona, K.; Lessard, L. Load Sharing in Single-Lap Bonded/Bolted Composite Joints. Part II: Global Sensitivity Analysis. Compos. Struct. 2015, 129, 276–283. DOI: 10.1016/j.compstruct.2015.03.069.
   Web of Science ®Google Scholar
• Paroissien, E.; Hoang-Ngoc, C. T.; Bhugaloo, H.; Ducher, D., Improving the Fatigue Life of Single-Lap Bolted Joints Thanks to the Hybrid (Bolted/Bonded) Joining Technology. 25th International Committee on Aeronautical Fatigue (ICAF 2009), Rotterdam, NL, Book of Proceedings, Springer Eds. ISBN 978-90-481-2745-0. pp. 475–492. May 27-29, 2009 doi: 10.1007/978-90-481-2746-7_27
   Google Scholar
• Hoang-Ngoc, C. T.; Paroissien, E. Simulation of Single-Lap Bonded and Hybrid (Bolted/Bonded) Joints with Flexible Adhesive. Int. J. Adhes. Adhes. 2010, 30(3), 117–129. DOI: 10.1016/j.ijadhadh.2009.12.002.
   Web of Science ®Google Scholar
• Paroissien, E.; Lachaud, F.; Schwartz, S. Modelling load transfer in single-lap adhesively bonded and hybrid (bolted/bonded) joints. Prog. Aerosp. Sci. 2022, 130, 100811. DOI: 10.1016/j.paerosci.2022.100811.
   Web of Science ®Google Scholar
• Brinson, H. F.; Brinson, L. C. Polymer engineering science and viscoelasticity: an introduction. Library of Congress ISBN. Springer. ISBN: 978-1-4899-7485-3. 2008.
   Google Scholar
• Crocker, L. E.; Duncan, B. C.; Hughes, R. G.; Urquhart, J. M., Hyperelastic Modelling of Flexible Adhesives; NPL Report CMMT(A)183. ISSN 1361-4061. May 1999.
   Google Scholar
• Lim, G. H.; Heidari-Rarani, M.; Bodjona, K.; Raju, K.; Romanov, V.; Lessard, L. Mechanical Characterization of EA9361 Flexible Epoxy Adhesive for the Design of Hybrid Bonded-Bolted Joints. Polym. Test. 2019, 79(106048), 1–9. DOI: 10.1016/j.polymertesting.2019.106048.
   Google Scholar
• Lim, G. H.; Bodjona, K.; Raju, K.; Romanov, V.; Fielding, S.; Lessard, L. Evolution of Mechanical Properties of Flexible Epoxy Adhesives Under Cyclic Loading and Its Effects on Composite Hybrid Bolted/Bonded Joint Design. Compos. Struct. 2018, 189, 54–60. DOI: 10.1016/j.compstruct.2018.01.049.
   Web of Science ®Google Scholar
• Manterola, J.; Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Jumel, J.; Urresti, J. Effect of the Width-To-Thickness Ratio on the Mode I Fracture Toughness of Flexible Bonded Joints. Eng. Fract. Mech 218 . 2019, 106584. DOI: 10.1016/j.engfracmech.2019.106584.
   Web of Science ®Google Scholar
• Manterola, J. Development of Advanced Methods to Characterize the Fracture Behavior of Flexible Bonded Joints. PhD. Thesis, Universitat de Girona (ES). 2020. http://hdl.handle.net/10803/672807.
   Google Scholar
• Cabello, M.; Zurbitu, J.; Renart, J.; Turon, A.; Martinez, F. A Non-Linear Hyperelastic Foundation Beam Theory Model for Double Cantilever Beam Tests with Thick Flexible Adhesive. Int. J. Solids Struct. 2015, 80, 19–27. DOI: 10.1016/j.ijsolstr.2015.10.017.
   Web of Science ®Google Scholar
• Hart-Smith, L. J. Adhesive-bonded single-lap joints; NASA Contractor Report, CR-112236, Douglas Aircraft Company: Long Beach (CA), 1973.
   Google Scholar
• Hart-Smith, L. J., Adhesive-bonded double-lap joints; NASA Contractor Report, CR-112235, Douglas Aircraft Company: Long Beach (CA), 1973.
   Google Scholar
• Benhaddou, T.; Stephan, P.; Daidie, A.; Alkatan, F.; Chirol, C.; Tuery, J. B. Effect of Axial Preload on Durability of Aerospace Fastened Joints. Int. J. Mech. Sci. 2018, 137, 214–223. DOI: 10.1016/j.ijmecsci.2018.01.023.
   Web of Science ®Google Scholar
• AECMA. prEN6115-P5 (Aerospace Series, Bolts), European Association of Aerospace Industries; 2007.
   Google Scholar
• ISO 37:2005(E). Rubber, Vulcanized or Thermoplastic: Determination of Tensile Stress-Strain Properties
   Google Scholar
• Meunier, L.; Chagnon, G.; Favier, D.; Orgeas, L.; Vacher, P. Mechanical experimental characterisation and numerical modelling of an unfilled silicone rubber. Polym. Test. 2008, 27(6), 765–777. DOI: 10.1016/j.polymertesting.2008.05.011.
   Web of Science ®Google Scholar
• Moreira, D. C.; Nunes, L. C. S. Comparison of Simple and Pure Shear for an Incompressible Isotropic Hyperelastic Material Under Large Deformation. Polym. Test. 2013, 32(2), 240–248. DOI: 10.1016/j.polymertesting.2012.11.005.
   Web of Science ®Google Scholar
• Sasso, M.; Palmieri, G.; Chiappini, G.; Amodio, D. Characterization of Hyperelastic Rubber-Like Materials by Biaxial and Uniaxial Stretching Tests Based on Optical Methods. Polym. Test. 2008, 27(8), 995–1004. DOI: 10.1016/j.polymertesting.2008.09.001.
   Web of Science ®Google Scholar
• Guillot, J. Calcul des assemblages vissés. Assemblages de pièces planes de faibles épaisseurs. Partie 1. Tech. de. l’ingénieur. BM. 2010, 5564, 1–20. DOI: 10.51257/a-v1-bm5564.
   Google Scholar
• Mooney, M. A. A Theory of Large Elastic Deformation. J. Appl. Phys. 1940, 11(9), 582–592. DOI: 10.1063/1.1712836.
   Google Scholar
• Rivlin, R. S.; Saunders, D. W. Large Elastic Deformations of Isotropic Materials VII. Experiments on the Deformation of Rubber. Philos. Transitions. Royal Soc. London A. 1951, 243(865), 251–288. DOI: 10.1098/rsta.1951.0004.
   Google Scholar
• Brinson, L. C.; Gates, T. S.2000. Comprehensive Composite Materials. Elsevier Science
   Google Scholar
• Williams, M. L. Structural Analysis of Viscoelastic Materials. Aiaa. J. 1964, 2(5), 785–808. DOI: 10.2514/3.2447.
   Google Scholar
• Paroissien, E.; Lachaud, F. On the Potential Static Strength of Hybrid (Bolted/Bonded) Lap Joints with Functionally Graded Adhesives. Aiaa. J. 2019, 57(2019), 4093–4103. DOI: 10.2514/1.J058372.
   Google Scholar