Effect of Methyl Methacrylate Graft Acrylonitrile–Butadiene-Styrene on Morphology and Properties of Polycarbonate/Acrylonitrile–Butadiene-Styrene Blend

References

• Shi , X. Y. , Zhang , P. , Liang , Y. C. , Ren , C. L. and Zhao , S. G. 2007 . Preparation and compatibility of EVM/TPU blend . J. Macromol. Sci. Phys. , 46 : 807
   Web of Science ®Google Scholar
• Kim , W. N. and Burn , C. M. 1988 . Thermal behavior, morphology, and some melt properties of blends of polycarbonate with poly(styrene-co-acrylonitrile) and poly(acrylonitrile–butadiene–styrene) . Polym. Eng. Sci. , 28 : 1115
   Web of Science ®Google Scholar
• Chiang , W. Y. and Hwung , D. S. 1987 . Properties of polycarbonate/acrylonitrile–butadiene–styrene blends . Polym. Eng. Sci. , 27 : 632
   Web of Science ®Google Scholar
• Huang , J. C. and Wang , M. S. 1989 . Recent advances in ABS/PC blends . Adv. Polym. Technol. , 9 : 293
   Google Scholar
• Nigam , I. , Nigam , D. and Mathur , G. N. 2005 . Effect of rubber content of ABS on properties of PC/ABS blends. I. Rheological, mechanical, and thermal properties . Polym. Plast. Technol. Eng. , 44 : 815
   Web of Science ®Google Scholar
• Morbitzer , L. , Kress , H. J. , Lindner , C. and Ott , K. H. 1985 . Behaviour of deformation and crack of polycarbonate/ABS blends . Angew. Makromol. Chem. , 132 : 19
   Google Scholar
• Suarez , H. , Barlow , J. W. and Paul , D. R. 1984 . Mechanical properties of ABS/polycarbonate blends . J. Appl. Polym. Sci. , 29 : 3253
   Web of Science ®Google Scholar
• Lee , M. P. , Hiltner , A. and Baer , E. 1992 . Formation and break-up of a bead-and-string structure during injection moulding of a polycarbonate/acrylonitrile–butadiene–styrene blend . Polymer , 33 : 675
   Web of Science ®Google Scholar
• Ishikawa , M. 1995 . Stability of plastic deformation and toughness of polycarbonate blended with poly(acrylonitrile–butadiene–styrene) copolymer . Polymer , 36 : 2203
   Web of Science ®Google Scholar
• Jin , D. W. , Shon , K. H. , Jeong , H. M. and Kim , B. K. 1998 . Compatibility enhancement of ABS/polycarbonate blends . J. Appl. Polym. Sci. , 69 : 533
   Web of Science ®Google Scholar
• Tan , Z. Y. , Xu , X. F. , Sun , S. L. , Zhou , C. , Ao , Y. H. , Zhang , H. X. and Han , Y. 2006 . Influence of rubber content in ABS in wide range on the mechanical properties and morphology of PC/ABS blends with different composition . Polym. Eng. Sci. , 46 : 1476
   Web of Science ®Google Scholar
• Chiang , W. Y. and Tzeng , G. L. 1997 . Effect of the compatibilizers on flame-reardant polycarbonate (PC)/acrylonitrile–butadiene–styrene (ABS) alloy . J. Appl. Polym. Sci. , 65 : 795
   Web of Science ®Google Scholar
• Balakrishnan , S. , Neelakantan , N. R. and Jaisankar , S. N. 1999 . Effect of functionality levels and compatibility of polycarbonate blends with maleic anhydride grafted ABS . J. Appl. Polym. Sci. , 74 : 2102
   Web of Science ®Google Scholar
• Parsons , C. F. 1989 . Polymer blends of polycarbonate styrene terpolymer and ABS resin , USP 4886855 .
   Google Scholar
• Wildes , G. S. , Keskkula , H. and Paul , D. R. 1999 . Morphology of PC/SAN blends: Effect of reactive compatibilization, SAN concentration, processing, and viscovity ratio . J. Polym. Sci., Part B: Polym. Phys. , 37 : 71
   Web of Science ®Google Scholar
• Wildes , G. S. , Keskkula , H. and Paul , D. R. 1999 . Coalescene in PC/SAN blends: effect of reactive compatibilization and matrix phase viscosity . Polymer , 40 : 5609
   Web of Science ®Google Scholar
• Wildes , G. S. , Harata , T. and Keskkula , H. 1999 . Synthesis and characterization of an amine-functional SAN for the compatibilization of PC/ABS blends . Polymer , 40 : 3069
   Web of Science ®Google Scholar
• Sung , Y. T. , Song , K. H. , Kim , W. N. , Kang , B. I. , Kim , S. L. and Lee , C. H. 2007 . Morphology and dynamic mechanical properties of poly(acrylonitrile–butadiene–styrene)/polycarbonate/clay nanocomposites prepared by melt mixing . Compos. Interfaces , 14 : 519
   Web of Science ®Google Scholar
• Charoen , N. O. , Leong , Y. W. and Hamada , H. 2008 . Determination of different morphological structures in PC/ABS open spiral injection moldings . Polym. Eng. Sci. , 48 : 786
   Web of Science ®Google Scholar
• Shi , J. J. , Chen , X. H. and Deng , K. H. 2008 . Study on PC/ABS alloy modified by MBS. . Plast. Sci. Technol. , 36 : 32
   Google Scholar
• Hu , G. S. , Wang , B. B. and Zhou , X. M. 2004 . Effect of EPDM–MAH compatibilizer on the mechanical properties and morphology of nylon 11/PE blends . Mater. Lett. , 58 : 3457
   Web of Science ®Google Scholar