Ethylene-Propylene Elastomer Grafted Maleic Anhydride Toughened Polyamide-6 Morphology and Properties

References

• Burgisi , G. , Paternoster , M. , Peduto , N. and Saraceno , A. 1997 . Toughness enhancement of polyamide 6 modified with different types of rubber: the influence of internal rubber cavitation . J. Appl. Polym. Sci. , 66 : 777
   Web of Science ®Google Scholar
• van der Mee , M. A.J. , l’Abee , R. M.A. , Portale , G. , Goossens , J. G.P. and van Duin , M. 2008 . Synthesis, structure, and properties of ionic thermoplastic elastomers based on maleated Ethylene/Propylene copolymers . Macromolecules , 41 : 5493
   Web of Science ®Google Scholar
• Zhang , Y. , Li , Y. , Zhao , S. and Xie , L. 2008 . Compatibility effect of radiation-grafting-functionalized styrene–butadiene–styrene on polyamide 6/styrene–butadiene–styrene blends . J. Appl. Polym. Sci. , 108 : 1029
   Web of Science ®Google Scholar
• Yue , Q. , Ren , J. and Pan , B. 2006 . Compatibilizing effect of ethylene-propylene-diene grafted maleic anhydride terpolymer on the blend of polyamide 66 and thermal liquid crystalline polymer . Polym. Compos. , 27 : 608
   Web of Science ®Google Scholar
• Sinthavathavorn , W. , Nithitanakul , M. , Grady , B. P. and Magaraphan , R. 2009 . Melt rheology and die swell of PA6/LDPE blends by using lithium ionomer as a compatibilizer . Polym. Bull. , 63 : 23
   Web of Science ®Google Scholar
• Fu , J. , Wang , L. and Zhang , A. 2008 . Synthesis of EPDM-graft-methyl methacrylate and styrene and its toughening effect on MS resin . Polym. Bull. , 60 : 405
   Web of Science ®Google Scholar
• Tjong , S. C. , Li , R. K.Y. and Xie , X. L. 2000 . Compatibilizing Effect of Styrene-Maleic Anhydride Copolymer on the Properties of Polyamide-6/Liquid Crystalline Copolyester Composites . J. Appl. Polym. Sci. , 77 : 1964
   Web of Science ®Google Scholar
• Lai , S.-M. , Liao , Y.-C. and Chen , T.-W. 2006 . Properties and preparation of compatibilized Nylon 6 Nanocomposites/ABS Blends using Functionalized Metallocene Polyolefin Elastomer. I. Impact properties . J. Appl. Polym. Sci. , 100 : 1364
   Web of Science ®Google Scholar
• Loyens , W. and Groeninckx , G. 2003 . Rubber toughened semicrystalline PET: influence of the Matrix Molar Mass and Test Temperature . Polymer , 44 : 123
   Web of Science ®Google Scholar
• Ozkoc , G. , Bayram , G. and Bayramli , E. 2008 . Impact essential work of fracture toughness of ABS/Polyamide-6 blends compatibilized with olefin based copolymers . J. Mater. Sci , 43 : 2642
   Web of Science ®Google Scholar
• D’orazio , L. , Mancarella , C. and Martuscelli , E. 1988 . Particle size distribution in rubber modified polyamides 6 . J. Mater. Sci. , 23 : 161
   Web of Science ®Google Scholar
• Silva , J. , Machado , A. V. and Maia , J. 2007 . Rheological behavior of compatibilized and non-compatibilized PA6/EPM blends. J. Rheol . Acta , 46 : 1091
   Google Scholar
• Yoo , Y. , Cui , L. , Yoon , P. J. and Paul , D. R. 2010 . Morphology and mechanical properties of rubber toughened amorphous polyamide/MMT nanocomposites . Macromolecules , 43 : 615
   Web of Science ®Google Scholar
• Adriaensens , P. , Storme , L. Carleer , R. 2002 . NMR Imaging study of stress-induced material response in rubber modified Polyamide 6 . Macromolecule , 35 : 135
   Web of Science ®Google Scholar
• Machado , A. V. , Covas , J. A. and Van Duin , M. 1999 . Chemical and morphological evolution of PA-6/Epm/Epm-g-MA blends in a twin screw extruder . J. Polym. Sci. A: Polym. Chem. , 37 : 1311
   Web of Science ®Google Scholar
• Bucknall , C. B. and Lazzeri , A. 2000 . Rubber toughening of plastics Part XIII dilatational yielding in PA6.6/EPR blends . J. Mater. Sci. , 35 : 427
   Web of Science ®Google Scholar
• Komalan , C. , George , K. E. , Jacob , S. and Thomas , S. 2008 . Reactive compatibilization of Nylon Copolymer/EPDM Blends: experimental aspects and their comparison with theory . Polym. Adv. Tech. , 19 : 351
   Web of Science ®Google Scholar
• Wang , B. , Hao , L. and Wang , W. 2010 . One-step compatibilization of polyamide 6/poly (ethylene-1-octene) blends with maleic anhydride and peroxide . J. Polym. Res. , 17 : 821
   Web of Science ®Google Scholar
• Lin , Y. , Zhong , W. , Shen , L. , Xu , P. and Du , Q. 2005 . Study on the relationship between crystalline structures and physical properties of Polyamide-6 . J. Macromol Sci.: Phys. , B44 : 161
   Web of Science ®Google Scholar
• Loyens , W. and Groeninckx , G. 2002 . Ultimate mechanical properties of Rubber toughened semicrystalline PET at room temperature . Polymer , 43 : 5679
   Web of Science ®Google Scholar
• The Advanced THermal Analysis System (ATHAS Databank) . (M. Pyda's Research Group, Ed.) can be accessed at http://athas.prz.edu.pl/
   Google Scholar
• Kumar , S. , Ramanaiah , B. V. and Maiti , S. N. 2007 . Effect of maleation on Polyamide-6/EPDM-G-MAH blends . Soft Matter , 4 : 85
   Web of Science ®Google Scholar
• Loyens , W. and Groeninckx , G. 2002 . Phase morphology development in reactively compatibilised polyethylene terephthalate/elastomer blends . Macromol. Chem. Phys , 203 : 1702
   Web of Science ®Google Scholar
• Gallego , R. , García-López , D. , López-Quintana , S. , Gobernado-Mitre , L. , Merino , J. C. and Pastor , J. M. 2008 . Toughening of PA6/mEPDM Blends by two methods of compounding, extruder and internal mixer: Rheological, Morphological and Mechanical Characterization . Polym. Bull. , 60 : 665
   Web of Science ®Google Scholar