348
Views
2
CrossRef citations to date
0
Altmetric
Original Articles

A Conductive Carbon Nanotube-Polymer Composite Based on a Co-continuous Blend

, , , , &
Pages 167-177 | Received 24 May 2010, Accepted 07 Sep 2010, Published online: 31 Oct 2012

References

  • Iijima , S. and Ichihashi , T. 1993 . Single-shell carbon nanotubes of 1-nm diameter . Nature , 363 : 603
  • Odom , T. W. , Huang , J. L. , Kim , P. and Lieber , C. M. 1998 . Atomic structure and electronic properties of single-walled carbon nanotubes . Nature , 391 : 62
  • Wilder , J. W.G. , Venema , L. C. , Rinzler , A. G. , Smalley , R. E. and Dekker , C. 1998 . Electronic structure of atomically resolved carbon nanotubes . Nature , 391 : 59
  • Huang , H. , Liu , C. H. , Wu , Y. and Fan , S. 2005 . Aligned carbon nanotube composite films for thermal management . Adv. Mater , 17 : 1652
  • Foulger , S. H. 1999 . Reduced percolation thresholds of immiscible conductive blends . J. Polym. Sci. B , 37 : 1899
  • Ounaies , Z. , Park , C. , Wise , K. E. , Siochi , E. J. and Harrison , J. S. 2003 . Electrical properties of single wall carbon nanotube reinforced polyimide composites . Compos. Sci. Technol , 63 : 1637
  • Ramasubramaniam , R. , Chen , J. and Liu , H. Y. 2003 . Homogeneous carbon nanotube/polymer composites for electrical applications . Appl. Phys. Lett , 83 : 2928
  • Zhang , C. , Ma , C. A. , Wang , P. and Sumita , M. 2005 . Temperature dependence of electrical resistivity for carbon black filled ultra-high molecular weight polyethylene composites prepared by hot compaction . Carbon , 43 : 2544
  • Gao , J. F. , Li , Z. M. , Meng , Q. J. and Yang , Q. 2008 . CNTs/UHMWPE composites with a two-dimensional conductive network . Mater. Lett , 62 : 3530
  • Li , B. , Zhang , Y. C. , Li , Z. M. , Li , S. N. and Zhang , X. N. 2010 . Easy fabrication and resistivity-temperature behavior of an anisotropically conductive carbon nanotube−polymer composite . J. Phys. Chem. B , 114 : 689
  • Cipriano , B. H. , Kota , A. K. , Gershon , A. L. , Laskowski , C. J. , Kashiwagi , T. , Bruck , H. A. and Raghavan , S. R. 2008 . Conductivity enhancement of carbon nanotube and nanofiber-based polymer nanocomposites by melt annealing . Polymer , 49 : 4846
  • Zhang , C. , Wang , P. , Ma , C. A. , Wu , G. Z. and Sumita , M. 2006 . Temperature and time dependence of conductive network formation: Dynamic percolation and percolation time . Polymer , 47 : 466
  • Zhang , C. , Han , H. F. , Yi , X. S. , Asai , S. and Sumita , M. 1999 . Selective location of the filler and double percolation of carbon black filled high density polyethylene/isotactic polypropylene blends . Compos. Interfaces , 6 : 227
  • Pötschke , P. , Bhattacharyya , A. R. and Janke , A. 2004 . Carbon nanotube-filled polycarbonate composites produced by melt mixing and their use in blends with polyethylene . Carbon , 42 : 965
  • Pötschke , P. , Bhattacharyya , A. R. and Janke , A. 2003 . Morphology and electrical resistivity of melt mixed blends of polyethylene and carbon nanotube filled polycarbonate . Polymer , 44 : 8061
  • Pötschke , P. , Dudkin , S. M. and Alig , I. 2003 . Dielectric spectroscopy on melt processed polycarbonate-multiwalled carbon nanotube composites . Polymer , 44 : 5023
  • Sumita , M. , Sakata , K. , Asai , S. , Miyasaka , K. and Nakagawa , H. 1991 . Dispersion of fillers and the electrical conductivity of polymer blends filled with carbon black . Polym. Bull , 25 : 265
  • Gubbels , F. , Jerome , R. , Teyssie , P. , Vanlathem , E. , Deltour , R. , Calderone , A. , Parente , V. and Bredas , J. L. 1994 . Selective localization of carbon black in immiscible polymer blends: A useful tool to design electrical conductive composites . Macromolecules , 27 : 1972
  • Gubbels , F. , Blacher , S. , Vanlathem , E. , Jerome , R. , Deltour , R. , Brouers , F. and Teyssie , P. 1995 . Design of electrical conductive composites: Key role of the morphology on the electrical properties of carbon black filled polymer blends . Macromolecules , 28 : 1559
  • Dai , K. , Xu , X. B. and Li , Z. M. 2007 . Electrically conductive carbon black (CB) filled in situ microfibrillar poly(ethylene terephthalate) (PET)/polyethylene (PE) composite with a selective CB distribution . Polymer , 48 : 849
  • Xie , H. Q. , Xu , J. and Zhou , S. 1991 . Polymer blends with two kinds of elastomeric ionomers . Polymer , 32 : 95
  • Veenstra , H. , Verkooijen , P. C.J. , van Lenta , B. J.J. , Dama , J. V. , de Boera , A. P. and Nijhofb , A. P.H.J. 2000 . On the mechanical properties of co-continuous polymer blends: experimental and modeling . Polymer , 41 : 1817
  • Liu , Z. H. , Marechal , P. and Jerome , R. 1998 . Blends of poly(vinylidene fluoride) with polyamide 6: interfacial adhesion, morphology and mechanical properties . Polymer , 39 : 1779
  • Omonov , T. S. , Harrats , C. , Moldenaers , P. and Groeninckx , G. 2007 . Phase continuity detection and phase inversion phenomena in immiscible polypropylene/polystyrene blends with different viscosity ratios . Polymer , 48 : 5917
  • Galloway , J. A. and Macosko , C. W. 2004 . Comparison of methods for the detection of cocontinuity in poly(ethylene oxide)/polystyrene blends . Polym. Eng. Sci. , 44 : 714
  • Faker , M. , Razavi Aghjeh , M. K. , Ghaffari , M. and Seyyedi , S. A. 2008 . Rheology, morphology and mechanical properties of polyethylene/ethylene vinyl acetate copolymer (PE/EVA) blends . Eur. Polym. J , 44 : 1834
  • Landreau , E. , Tighzert , L. , Bliard , C. , Berzin , F. and Lacoste , C. 2009 . Morphologies and properties of plasticized starch/polyamide compatibilized blends . Eur. Polym. J , 45 : 2609
  • Weis , C. , Leukel , J. , Borkenstein , K. , Maier , D. , Gronski , W. , Friedrich , C. and Honerkamp , J. 1998 . Morphological and rheological detection of the phase inversion of PMMA/PS polymer blends . Polym. Bull , 40 : 235
  • Vinckier , I. and Laun , H. M. 1999 . Manifestation of phase separation processes in oscillatory shear: droplet-matrix systems versus co-continuous morphologies . Rheol. Acta , 38 : 274
  • Lacroix , C. , Bousmina , M. , Carreau , P. J. , Favis , B. D. and Michel , A. 1996 . Properties of PETG/EVA blends: 1. Viscoelastic, morphological and interfacial properties . Polymer , 37 : 2939
  • Huitric , J. , Mederic , P. , Moan , M. and Jarrin , J. 1998 . Influence of composition and morphology on rheological properties of polyethylene/polyamide blends . Polymer , 39 : 4849
  • Asai , S. , Sakata , K. , Sumita , M. and Miyasaka , K. 1992 . Effect of interfacial free energy on the heterogeneous distribution of oxidized carbon black in polymer blends . Polym. J , 24 : 415
  • Wu , S. H. 1970 . Surface and interfacial tensions of polymer melts. II. Poly(methyl methacrylate), poly(n-butyl methacrylate), and polystyrene . J. Phys. Chem , 74 : 632
  • Fowkes , F. M. 1963 . Additivity of intermolecular forces at interfaces. I. Determination of the contribution to surface and interfacial tensions of dispersion forces in various liquids . J. Phys. Chem. , 67 : 2538
  • Goldel , A. , Kasaliwal , G. and Pötschke , P. 2009 . Selective localization and migration of multiwalled carbon nanotubes in blends of polycarbonate and poly(styrene-acrylonitrile) . Macromol. Rapid. Commun , 30 : 423
  • Nuriel , S. , Liu , L. , Barber , A. H. and Wagner , H. D. 2005 . Direct measurement of multiwall nanotube surface tension . Chem. Phys. Lett , 404 : 263
  • Feng , J. Y. , Chan , C. M. and Li , J. X. 2003 . A method to control the dispersion of carbon black in an immiscible polymer blend . Polym. Eng. Sci. , 43 : 1058

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.