Dynamic Rheology of Poly(3-hydroxybutyrate-co-4-Hydroxybutyrate) /Clay Biocomposites

References

• Min, M.; Shi, Y.; Ma, H.; Huang, H.; Shi, J.; Chen, X.; Liu, Y.; Wang, L. Polymer-nanoparticle composites composed of poly(3-hydroxybutyrate-co-3-hydroxyvalerate) and coated silver nanoparticles. J. Macromol. Sci. Part B, Phys. 2015, 54, 411–423.
   Web of Science ®Google Scholar
• Zhao, L.; Liu, X.; Zhang, R.; He, H.; Jin, T.; Zhang, J. Unique morphology in polylactide/graphene oxide nanocomposites. J. Macromol. Sci. Part B, Phys. 2015, 54, 45–57.
   Web of Science ®Google Scholar
• Liu, X.; Zhu, J.; Ni, H.; Chen, S. Influence of blend composition on crystallization of poly(L-Lactic Acid)/poly (ethylene oxide) crystalline/crystalline blends. J. Macromol. Sci. Part B, Phys. 2015, 54, 203–214.
   Web of Science ®Google Scholar
• Jose, J.; Shehzad, F.; Al-Harthi, M. A. Preparation method and physical, mechanical, thermal characterization of poly(vinyl alcohol)/poly(acrylic acid) blends. Polym. Bull. 2014, 71, 2787–2802.
   Web of Science ®Google Scholar
• Kaavessina, M.; Ali, I.; Elleithy, R.; Al-Zahrani, S. M. Preparation and characterization of poly(lactic acid)/elastomer blends prepared by melt blending technique. J. Elastom. Plast. 2014, 46, 253–268.
   Web of Science ®Google Scholar
• Yang, J.; Qin, G.; Liang, J. Z. Flow properties and extensional viscosity prediction of high density polyethylene and poly(butylene succinate) blends. J. Thermoplas. Compos. 2016, 29, 479–493.
   Web of Science ®Google Scholar
• Tsi, H. Y.; Tsen, W. C.; Shu, Y. C.; Chuang, F. S.; Chen, C. C. Compatibility and characteristics of poly (butylene succinate) and propylene-co-ethylene copolymer blend. Polym. Test. 2009, 28, 875–885.
   Web of Science ®Google Scholar
• Wu, C. S. Preparation, characterization and biodegradability of crosslinked tea plant-fibre-reinforced polyhydroxyalkanoate composites. Polym. Degrad. Stabil. 2013, 98, 1473–1480.
   Web of Science ®Google Scholar
• Baldi, F.; Franceschini, A.; Bignotti, F. On the measurement of the high rate flow properties of organo-clay platelet filled polyamide 6 melts by capillary rheometer. Polym. Test. 2011, 30, 765–772.
   Web of Science ®Google Scholar
• Żenkiewicz, M.; Richert, J.; Różański, A. Effect of blow moulding ratio on barrier properties of polylactide nanocomposite films. Polym. Test. 2010, 29, 251–257.
   Web of Science ®Google Scholar
• Ahamad, A.; Patil, C. B.; Mahulikar, P. P.; Hundiwale, D. G.; Gite, V. V. Studies on the flame retardant, mechanical and thermal properties of ternary magnesium hydroxide/clay/EVA nanocomposites. J. Elastom. Plast. 2012, 44, 251–261.
   Web of Science ®Google Scholar
• Liu, W.; Liu, B.; Wang, X. Morphology, rheological properties, and crystallization behavior of polypropylene/clay nanocomposites. Int. J. Polym. Mater. Po. 2013, 62, 164–171.
   Web of Science ®Google Scholar
• Jose, A. J.; Alagar, M.; Aprem, A. S. Thermal and barrier properties of organoclay-filled polysulfone nanocomposites. Int. J. Polym. Mater. Po. 2012, 61, 544–557.
   Web of Science ®Google Scholar
• Liang, J. Z. Tensile and flexural properties of hollow glass bead-filled ABS composites. J. Elastom. Plast. 2005, 37, 361–370.
   Web of Science ®Google Scholar
• Arsad, A.; Rahmat, A. R.; Hassan, A.; Mokhtar, M.; Dali, S. N. M. Flow characteristics and dynamic behavior of polyamide 6/acrylonitile butadiene styrene (PA6/ABS) Blends. Int. J. Polym. Mater. Polym. Biometer. 2013, 62, 209–214.
   Web of Science ®Google Scholar
• Yang, J.; Fan, L. D.; Dai, Y. H. Modified single-mode leonov rheological equations for polymer melts and solutions. J. Macromol. Sci. Part B, Phys. 2015, 54, 424–432.
   Web of Science ®Google Scholar
• Cho, J.; Paul, D. Nylon 6 nanocomposites by melt compounding. Polymer 2001, 42, 1083–1094.
   Web of Science ®Google Scholar
• Scaffaro, R.; Botta, L.; Ceraulo, M.; La Mantia, F. Effect of kind and content of organo-modified clay on properties of PET nanocomposites. J. Appl. Polym. Sci. 2011, 122, 384–392.
   Web of Science ®Google Scholar
• Hablot, E.; Bordes, P.; Pollet, E.; Averous, L. Thermal and thermo-mechanical degradation of poly(3-hydroxybutyrate)-based multiphase systems. Polym. Degrad. Stabil. 2008, 93, 413–421.
   Web of Science ®Google Scholar
• Liu, Q. S.; Zhu, M. F.; Wu, W. H.; Qin, Z. Y. Reducing the formation of six-membered ring ester during thermal degradation of biodegradable PHBV to enhance its thermal stability. Polym. Degrad. Stabil. 2009, 94, 18–24.
   Web of Science ®Google Scholar
• Liang, J. Z.; Yang, J.; Tang, C. Y. Melt shear viscosity of PP/Al(OH)3/Mg(OH)2 flame retardant composites at high extrusion rates. J. Appl. Polym. Sci. 2011, 119, 1835–1841.
   Web of Science ®Google Scholar
• Liang, J. Z. Melt extrudate swell behavior of POM/EVA/HDPE/nano-CaCO3 composites. J. Polym. Eng. 2013, 33, 19–26.
   Web of Science ®Google Scholar
• Ismail, H.; Supri, A. G. Rheological behavior, tensile properties, morphology, and thermal stability of recycled poly(vinyl chloride)/acrylonitrile butadiene rubber (PVCr/NBR) blends: The effect of maleic acid. J. Elastom. Plast. 2008, 40, 113–126.
   Web of Science ®Google Scholar
• Ghanbari, A.; Heuzey, M. C.; Carreau, P. J.; Ton-That, M. T. Morphological and rheological properties of PET/clay nanocomposites. Rheol. Acta. 2013, 52, 59–74.
   Web of Science ®Google Scholar