Influence of the Matrix Molecular Weight on the Morphology and Properties of Poly(Ethylene Terephthalate)/Poly(Ethylene-Octene) Blends

References

• Bedi, R.; Singh, A. K.; Kaith, B. S. Composite Materials Based on Recycled Polyethylene Terephthalate and Their properties – A Comprehensive Review. Compos. Part B-Eng. 2021, 219, 108928. DOI: 10.1016/j.compositesb.2021.108928.
   Web of Science ®Google Scholar
• Bocz, K.; Ronkay, F.; Decsov, K. E.; Molnár, B.; Maros, G. Application of Low-Grade Recyclate to Enhance Reactive Toughening of Poly(Ethylene Terephthalate). Polym. Degrad. Stab. 2021, 185, 109505. DOI: 10.1016/j.polymdegradstab.2021.109505.
   Web of Science ®Google Scholar
• Huang, J.; Wang, J.; Qiu, Y.; Wu, D. Mechanical Properties of Thermoplastic Polyester Elastomer Controlled by Blending with Poly(Butylene Terephthalate). Polym. Test. 2016, 55, 152–159. DOI: 10.1016/j.polymertesting.2016.08.020.
   Web of Science ®Google Scholar
• Cao, W.; Wei, D. F.; Zheng, A. N.; Guan, Y. Surface Enrichment and Nonleaching Antimicrobial Performance of Polypropylene Grafted Poly(Hexamethylene Guanidine) (PP-g-PHMG) in Poly(Ethylene Terephthalate)/PP-g-PHMG. Eur. Polym. J. 2019, 118, :231–238. DOI: 10.1016/j.eurpolymj.2019.05.062.
   Web of Science ®Google Scholar
• Jiang, J.; Wang, S.; Hou, J.; Zhang, K.; Wang, X.; Li, Q.; Liu, G. Effect of Injection Velocity on the Structure and Mechanical Properties of Micro Injection Molded Polycarbonate/ Poly(Ethylene Terephthalate) Blends. Mater. Des. 2018, 141, 132–141. DOI: 10.1016/j.matdes.2017.12.024.
   Web of Science ®Google Scholar
• Yan, Y.; Huang, Y. H.; Wang, Y.; Xiao, Z. C.; Yang, M. B. Polyamide 6 (PA6) /Polyethylene Terephthalate (PET) Blends with Gradient and Encapsulation Structure Developed by Injection Molding. Polymer 2019, 180, 121679. 10.1016/j.polymer.2019.121679.
   Web of Science ®Google Scholar
• Rico, M.; López, J.; Montero, B.; Bouza, R.; Díez, F. J. Influence of the Molecular Weight of a Modifier on the Phase Separation in an Epoxy Thermoset Modified with a Thermoplastic. Eur. Polym. J. 2014, 58, 125–134. DOI: 10.1016/j.eurpolymj.2014.06.017.
   Web of Science ®Google Scholar
• Dijkstra, K.; Gaymans, R. J. Nylon-6/Rubber Blends: 8. Influence of the Molecular Weight of the Matrix on the Impact Behaviour. Polymer 1994, 35, 332–335. DOI: 10.1016/0032-3861(94)90698-X.
   Web of Science ®Google Scholar
• Oshinski, A. J.; Keskkula, H.; Paul, D. R. The Role of Matrix Molecular Weight in Rubber Toughened Nylon 6 Blends: 2. Room Temperature Izod Impact Toughness. Polymer 1996, 37, 4909–4918. DOI: 10.1016/0032-3861(96)00374-6.
   Web of Science ®Google Scholar
• Oshinski, A. J.; Keskkula, H.; Paul, D. R. The Role of Matrix Molecular Weight in Rubber Toughened Nylon 6 Blends: 3. Ductile-Brittle Transition Temperature. Polymer 1996, 37, 4919–4928. DOI: 10.1016/0032-3861(96)00375-8.
   Web of Science ®Google Scholar
• Van der Wal, A.; Mulder, J. J.; Oderkerk, J.; Gaymans, R. J. Polypropylene-Rubber Blends: 1. The Effect of the Matrix Properties on the Impact Behaviour. Polymer 1998, 39, 6781–6787. DOI: 10.1016/S0032-3861(98)00170-0.
   Web of Science ®Google Scholar
• Guimaraes, M. J. O. C.; Coutinho, F. M. B.; Rocha, M. C. G.; Farah, M.; Bretas, R. E. S. Effect of Molecular Weight and Long Chain Branching of Metallocene Elastomers on the Properties of High Density Polyethylene Blends. Polym. Test. 2003, 22, 843–847. DOI: 10.1016/S0142-9418(03)00019-9.
   Web of Science ®Google Scholar
• Geng, C.; Su, J.; Han, S.; Wang, K.; Fu, Q. Hierarchical Structure and Unique Impact Behavior of Polypropylene/Ethylene-Octene Copolymer Blends as Obtained via Dynamic Packing Injection Molding. Polymer 2013, 54, 3392–3401. DOI: 10.1016/j.polymer.2013.04.048.
   Web of Science ®Google Scholar
• Grizzuti, N.; Bifulco, O. Effects of Coalescence and Breakup on the Steady-State Morphology of an Immiscible Polymer Blend in Shear Flow. Rheol. Acta 1997, 36, 406–415. DOI: 10.1007/BF00396327.
   Web of Science ®Google Scholar
• Taylor, G. I. The Viscosity of a Fluid Containing Small Drops of Another Fluid. Proc. R. Soc. Lond. Ser. A 1932, 138, 41–48. DOI: 10.1098/rspa.1932.0169.
   Google Scholar
• Taylor, G. I. The Formation of Emulsions in Definable Fields of Flow. Proc. R. Soc. Lond. Ser. A 1934, 146, 501–523. DOI: 10.1098/rspa.1934.0169.
   Google Scholar
• Grace, H. P. Dispersion Phenomena in High Viscosity Immiscible Fluid Systems and Application of Static Mixers as Dispersion Devices in Such Systems. Chem. Eng. Commun. 1982, 14, 225–277. DOI: 10.1080/00986448208911047.
   Web of Science ®Google Scholar
• Hale, W.; Lee, J. H.; Keskkula, H.; Paul, D. R. Effect of PBT Melt Viscosity on the Morphology and Mechanical Properties of Compatibilized and Uncompatibilized Blends with ABS. Polymer 1999, 40, 3621–3629. DOI: 10.1016/S0032-3861(98)00583-7.
   Web of Science ®Google Scholar
• Liu, Y. J.; Xu, H. Q.; Liu, G.; Pu, S. Z. Core Shell Morphologies in Recycled Poly(Ethylene Terephthalate) Linear Low-Density Polyethylene Poly(Styrene-b-(Ethylene-co-Butylene)-b-Styrene) Ternary Blends. Polym. Bull. 2017, 74, 4223–4233. DOI: 10.1007/s00289-017-1950-1.
   Web of Science ®Google Scholar
• Liu, Y. J.; Zhong, M.; Liu, G.; Pu, S. Z. Formation of High-Density Polyethylene–Poly(Ethylene-Octene) Core–Shell Particles in Recycled Poly(Ethylene Terephthalate) by Reactive Blending. Prog. Rubber Plast. Re 2019, 35, 117–137. DOI: 10.1177/1477760619843536.
   Web of Science ®Google Scholar