485
Views
5
CrossRef citations to date
0
Altmetric
Article

Development of debris bed cooling evaluation code, DPCOOL, based on heating porous media submerged in two-phase pool

, , &
Pages 55-69 | Received 29 May 2018, Accepted 08 Sep 2018, Published online: 31 Oct 2018

References

  • Fuller EL, Basu S, Esmaili H. Modeling and analysis of in-vessel melt retention and ex-vessel corium cooling in the U.S. Presented at IAEA Technical Conf; 2016 Oct 17–21; Shanghai, China.
  • Lignini F. INPRO User requirement 1.4 ‘Release into the containment’ Position of the EPR reactor. Presented at INPRO dialogue forum 7; 2013 Nov 19-22; Vienna.
  • Tokyo Electric Power Company Holdings, Inc. Progress of Unit 3 PCV internal investigation, (Preliminary report of July 19 investigation). Japan: Tokyo Electric Power Company Holdings, Inc; 2017 Jul 19.
  • Tokyo Electric Power Company Holdings, Inc. Progress of Unit 3 PCV internal investigation, (Preliminary report of July 21 investigation). Japan: Tokyo Electric Power Company Holdings, Inc; 2017 Jul 21.
  • Tokyo Electric Power Company Holdings, Inc. Progress of Unit 3 PCV internal investigation, (Preliminary report of July 22 investigation). Japan: Tokyo Electric Power Company Holdings, Inc; 2017 Jul 22.
  • Basso S, Konovalenko A, Kudinov P. Effectiveness of the debris bed self-leveling under severe accident conditions. Ann Nucl Energy. 2016;95:75–85.
  • Kudinov P, Davydov M. Development and validation of conservative-mechanistic and best estimate approaches to quantifying mass fractions of agglomerated debris. Nucl Eng Des. 2013;262:452–461.
  • Konovalenko A, Karbojian A, Kudinov P. Experimental results on purging and underwater liquid melt spreading and energetic melt-coolant interaction. Proc. NUTHOS-9; 2012 Sep 9-13; Kaohsiung, Taiwan.
  • Kudinov P, Galushin S, Yakush S, et al. A framework for assessment of severe accident management effectiveness in Nordic BWR plants. Proc. PSAM 12; 2014 Jun 22-27; Honolulu, Hawaii.
  • Tung VX, Dhir VK. A hydrodynamic model for two-phase flow through porous media. Int J Multiph Flow. 1988;14(1):47–65.
  • Ergun S. Fluid flow through packed columns. Chem Eng Prog. 1952;48(2):89–94.
  • Darcy H. Les Fontaines Publiques de la Ville de Dijon, Dalamont. Paris: Dalmont; 1856.
  • Launder BE, Spalding DB. The numerical computing of turbulent flows. Comput Methods Appl Mech Eng. 1974;3:269–289.
  • Yakush S, Kudinov P, Dinh T-N. Multiscale simulation of self-organization phenomena in the formation and coolability of corium debris bed. Proc. NURETH-13 N13P1143; 2009 Sep 27-Oct 2; Kanazawa, Japan.
  • Schmidt W. Influence of multidimensionality and interfacial friction on the coolability of fragmented corium. [ Doctoral Thesis]. Germany: Institut für Kernenergetik und Energiesysteme; 2004. IKE 2-149, ISSN-0173-6892.
  • Ishii M, Zuber N. Drag coefficient and relative velocity in bubbly, droplet or particulate flows. AIChE J. 1979 September;5:843.
  • Angelini S, Yuen WW, Theofanous TG. Premixing-related behavior of steam explosions. Nucl Eng Des. 1995;155:115–157.
  • Yakush S, Kudinov P. Effects of water pool subcooling on the debris bed spreading by coolant flow. Proc. ICAPP 2011 paper 11416; 2011 May 2-6; Nice France.
  • Garland WJ. Decay heat estimates for MNR. Technical Report 1998-03. Canada: McMaster University; 1999 Feb.
  • Scatena GJ, Upham GL. Power generation in a BWR following normal shutdown or LOCA conditions. General Electric Company; 1973 Mar. NEDO-10625.
  • Yakush S, Kudinov P, Villanueva W, et al. In-vessel debris bed coolability and its influence on the vessel failure. Proc. NURETH15 paper NURETH15-464; 2013 May 12-17; Pisa, Italy.
  • Spalding DB. Mathematical method in nuclear-reactor thermal hydraulics. Proc. Am. Nucl. Soc. Meeting on Nuclear-Reactor Thermal Hydraulics; 1980 Oct 6; Saratoga (NY).
  • Nakajima K. Linear solver. Lecture note of the summer intensive course on parallel computing programming. Tokyo: University of Tokyo; 2011 Sep 22. [in Japanese]. Available from: http://nkl.cc.u-tokyo.ac.jp/11e/05-Solver/
  • Chu W, Dhir VK, Marshall J. Study of pressure drop, void fraction and relative permeabilities of two phase flow through porous media. Heat Trans Seattle, AIChE Symp Series. 1983;79(225):224–235.
  • Rashid M, Chen Y, Kulenovic R, et al. Experiments on the coolability of a volumetrically heated particle bed with irregularly shaped particles. Proc. NUTHOS7; 2008 Oct 5-9; Seoul, Korea.
  • Kulkarni PP, Rashid M, Kulenovic R, et al. Experimental investigation of coolability behaviour of irregularly shaped particulate debris bed. Nucl Eng Des. 2010;240:3067–3077.
  • Kaiser A, Schütz W, Will H. PREMIX experiments PM12-PM18 to investigate the mixing of a hot melt with water. Germany: Forschungszentrum GmbH, Karlsruhe; 2001. FZKA-6380.
  • Clavier R, Chikhi N, Fichot F, et al. Experimental investigation on single-phase pressure losses in nuclear debris beds: identification of flow regimes and effective diameter. Nucl Eng Des. 2015;292:222–236.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.