References
- Krylov A, Pietro Di E, Hanada M, et al. General design of the neutral beam injection system and integration with ITER. Fusion Technology1996. 1996-1997;697–700. doi:10.1016/B978-0-444-82762-3.50144-0
- Starnella G, Harder ND, Fantz U. Neutral beam injection for fusion reactors: technological constraints versus functional requirements. Nucl Fusion. 2021 9;61(10):106032. doi: 10.1088/1741-4326/ac227a
- Xie Y, Hu C, Wei J, et al. Conceptual design of a beam source for negative neutral beam injector of CRAFT facility. Fusion Eng Des. 2021;167:112377. doi:10.1016/j.fusengdes.2021.112377
- Zhang Z, Wang G, Chen C, et al. Physical design of the neutralizer for CFETR negative ion based neutral beam injection prototype. Fusion Eng Des. 2019;148:111316.1–111316.6. doi: 10.1016/j.fusengdes.2019.111316
- Hemsworth RS, Boilson D, Blatchford P, et al. Overview of the design of the ITER heating neutral beam injectors. New J Phys. 2017;19(2):025005. doi: 10.1088/1367-2630/19/2/025005
- Holtum D, Froeschle M, Heinemann B, et al. Calorimeter design-aspects for neutral beam injection on W7-X. Fusion Eng Des. 2011;86(6–8):905–908. doi: 10.1016/j.fusengdes.2011.04.046
- Bansal LK, Patel PJ, Prahlad V, et al. Signal conditioning & data acquisition system for neutral beam calorimeter for NBI SST-1. 2013 IEEE 25th Symposium on Fusion Engineering (SOFE), San Francisco, CA, USA; 2013. p. 1–4.
- Tang N, Chun-Dong H, Xie Y-L, et al. Thermal analysis and optimization of the calorimeter verification prototype of a negative ion-based neutral beam injection System. Fusion Eng Des. 2021;176:113018. doi:10.1016/j.fusengdes.2022.113018
- Tao L, Hu C, Xie Y. Structure design of calorimeter of EAST-NBI system using thermal inertia with cooling water. International Conference Pacific Basin Nuclear Conference. Proceedings of The 20th Pacific Basin Nuclear Conference. 2017. doi:10.1007/978-981-10-2317-0_83
- Veltri P, Agostinetti P, Marcuzzi D, et al. The influence of grid positioning on the beam optics in the neutral beam injectors for ITER. Fusion Eng Des. 2016;107:64–69. doi:10.1016/j.fusengdes.2016.04.011
- Nwokolo N, Mukumba P, Obileke KC. Thermal performance evaluation of a double pipe heat exchanger installed in a biomass gasification System. Jf Eng. 2020;2020:1–8. doi: 10.1155/2020/6762489
- Russo F, Basse NT. Scaling of turbulence intensity for low-speed flow in smooth pipes. Flow Meas Instrum. 2016;52:S101–114. doi: 10.1016/j.flowmeasinst.2016.09.012
- Han H, L HY, S LY, et al. A numerical study on compact enhanced fin-and-tube heat exchangers with oval and circular tube configurations. Int J Heat & Mass Trans. 2013;65(5):686–695. doi: 10.1016/j.ijheatmasstransfer.2013.06.049
- K AA, Vazifeshenas Y, Rahimi-Esbo M, et al. Numerical simulation of twisted tapes fitted in circular tube consisting of alternate axes and regularly spaced tapes. Acta Sci Technol. 2018;40(1):37348. doi: 10.4025/actascitechnol.v40i1.37348
- Moukalled F, Mangani L, Darwish M, et al. The finite volume method. 2016;Springer International Publishing. doi: 10.1007/978-3-319-16874-6_5
- Wang FJ. The principle and application of computational fluid dynamics software—CFD. Beijing: Tsinghua University Press; 2004.
- Orozco G, Froeschle M, N den Harder, et al. Reviewed design of the high heat flux panels for the AUG and W7-X neutral beam calorimeter. Fusion Eng Des. 2019;146:2105–2109. doi:10.1016/j.fusengdes.2019.03.116
- Nagel WE, KroNer DH, Resch MM et al. High performance computing in science and engineering ´16. Springer International Publishing: 2016. doi:10.1007/978-3-319-47066-5
- Tang N, Chun-Dong H, Xie Y-L et al. Thermodynamic simulation and structural optimization of the collimator in the drift duct of EAST-NBI. Nucl Eng Technol. 2022;54(11):4134–4145. doi: 10.1016/j.net.2022.07.011
- Jing L, Mingxing S, Ke C, et al. Numerical simulation and verification of flow distribution and heat transfer characteristics of CO2 micro⁃channel gas cooler. J Refrig. 2018;39(4):6.
- Kim D, Yu C-H, Yoon SH, et al. Effects of manifold geometries on flow distribution to parallel microchannels. J Mech Sci Technol. 2011;25(12):3069–3074. doi: 10.1007/s12206-011-1220-3
- Liu H, Li P, Lew JV, et al. Experimental study of the flow distribution uniformity in flow distributors having novel flow channel bifurcation structures. Exp Therm Fluid Sci. 2012;37(2):142–153. doi: 10.1016/j.expthermflusci.2011.10.015
- Shiming Y, Wenquan T. Heat transfer. Beijing: Higher Education Press; 2006.
- Sonawane CR, Tolia K, Pandey A, et al. Experimental and numerical analysis of heat transfer and fluid flow characteristics inside pulsating heat pipe. Chem Eng Commun. 2023;2021(4):1–17. doi: 10.1080/00986445.2021.1974413
- Guaman SO, Hanke S, Sartori E. Analysis of twisted tape solutions for cooling of the residual ion dump of the ITER HNB, Fusion Eng. Des. 2016;109:437–442. doi: 10.1016/j.fusengdes.2016.02.085