High temperature electrochemical reaction parameters affecting electrochemical corrosion potential of stainless steels in hydrogen peroxide environment

References

• Fejes PP . Deaeration practices in Swedish BWRs, Proc. Seminar in countermeasures for pipe cracking in BWRs; Palo Alto. CA, USA: Electric Power Research Institute; 1980.
   Google Scholar
• Law RJ, Indig ME, Lin CC Suppression of radiolytic oxygen production in a BWR by feedwater hydrogen addition. Proc. 3rd BNES International Conference on Water Chemistry in Nuclear Reactor Systems; 1983 Oct 17-21; Bournemouth (UK): BNES; Vol. 2, 23–30.
   Google Scholar
• Hettiarachchi S, Law RJ, Miller WD et al. First application of NobleChemTM to an operating BWR. Proc. JAIF International Conference on Water Chemistry in Nuclear Power Plants; 1998 Oct 13-16; Kashiwazaki, Niigata (Japan): 155–160.
   Google Scholar
• Hettiarachchi S, Diaz TP, Varela JA et al. NobleChemTM application during power operation for crack mitigation and dose rate reduction of BWRs. Proc. 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems; 2007 Aug 19-23; Whistler, BC (Canada): Canadian Nuclear Society.Paper No. P0087.
   Google Scholar
• Uchida S, Wada Y, Yamamoto S et al. Verification and validation procedures of calculation codes for determining corrosive conditions in the BWR primary cooling system based on water radiolysis and mixed potential models. J Nucl Sci Technol. 2014;51(1):24–26. doi: 10.1080/00223131.2013.842945
   Web of Science ®Google Scholar
• Wada Y, Ishida K, Tachibana M et al. High temperature electrochemical reaction parameters affecting electrochemical corrosion potential of type 316L stainless steel. J Nucl Sci Technol. 2021;59(4):491–498. doi: 10.1080/00223131.2021.1980447
   Web of Science ®Google Scholar
• Tachibana M, Ishida K, Wada Y et al. Cathodic polarization properties of hydrogen peroxide and the effect on electrochemical corrosion potential calculation under simulated BWR environment. Corrosion 2013 Mar 17-21; Orlando, FL (USA): NACE, Paper No. 2155.
   Google Scholar
• Wada Y, Ishida K, Tachibana M et al. High temperature electrochemical reaction parameters affecting electrochemical corrosion potential of Ni-base Alloy 182. J Nucl Sci Technol. 2022;59(4):491–498. doi: 10.1080/00223131.2022.2096145
   Web of Science ®Google Scholar
• Tachibana M, Ishida K, Wada Y et al. Study of polarization curve measurement method for type 304 stainless steel in BWR high temperature-high purity water. J Nucl Sci Technol. 2009;46(2):132–141. doi: 10.1080/18811248.2007.9711514
   Web of Science ®Google Scholar
• Uchida S, Shigenaka N, Tachibana M et al. Effects of hydrogen peroxide on intergranular stress corrosion cracking of stainless steel in high temperature water, (I). J Nucl Sci Technol. 1998;35(4):301–308. doi: 10.1080/18811248.1998.9733860
   Web of Science ®Google Scholar
• Wada Y, Ishida K, Tachibana M. Effectiveness analysis of noble metal treatment to mitigation of intergranular stress corrosion cracking of stainless steel in BWR reactor, Proc. 11th Int. Conf. Environmental Degradation of Materials in Nuclear Systems; 2003 Aug. 10-14; Stevenson, WA (USA): 488–499.
   Google Scholar
• Wada Y, Takagi J, Yamamoto S. Current state on evaluation procedure for corrosive environment in the BWR coolant system and related issues. Atomic Energy Society of Japan - Water Chemistry Division report #2022-0001, 2022 [in Japanese].
   Google Scholar
• Tachibana M, Ishida K, Wada Y et al. Determining factors for anodic polarization curves of typical structural materials of boiling water reactors in high temperature – high purity water. J Nucl Sci Technol. 2012;49(2):253–262. doi: 10.1080/00223131.2011.649077
   Web of Science ®Google Scholar
• Tachibana M, Ishida K, Wada Y et al. Cathodic polarization curves of the oxygen reduction reaction on various structural materials of boiling water reactors in high temperature–high purity water. J Nucl Sci Technol. 2012;49(5):551–561. doi: 10.1080/00223131.2012.676880
   Web of Science ®Google Scholar
• Wada Y, Yamamoto S, Takiguchi H. Current status and issues in ECP calculation: moving toward standardization. Proceeding 6th Workshop on LWR Coolant Water Radiolysis and Electrochemistry; Jeju, Korea. AESJ; 2006Oct 27. (CD-ROM).
   Google Scholar
• Kinoshita K. Electrochemical oxygen technology. New York: John Wily & Sons Inc; 1992.
   Google Scholar
• Lee JB. Electrochemical approach to corrosion problems of several iron-nickel-chromium alloys in high temperature high pressure water. PhD dissertation. The Ohio State University. 1978.
   Google Scholar
• Macdonald DD. Viability of hydrogen water chemistry for protecting in-vessel components of boiling water reactors. Corrosion. 1992;48(3):194–205. doi: 10.5006/1.3315925
   Web of Science ®Google Scholar
• Hosino S. Heat and mass transfer under high flow condition. J Metal Finishing Soc. 1975;26(7): 302–308. in Japanese.
   Google Scholar
• Wada Y, Shigenaka N, Uetake N et al. Numerical simulation of SCC environment in a BWR coolant system. In Proc 8th Int’l sym. On environmental degradation of materials in nuclear power systems-water reactors. Ameria Island: FL (USA) ANS; 1997 Aug 10-14; pp. 574–581
   Google Scholar
• Wada Y, Ishida K, Tachibana M et al. Electrochemical corrosion potential monitoring in BWRs. Power Plant Chemistry. 2019;21(1):28–41.
   Web of Science ®Google Scholar
• Wada Y, Watanabe A, Tachibana M et al. Effects of hydrogen peroxide on intergranular stress corrosion cracking of stainless steel in high temperature water, (III) crack growth rates in corrosive environment determined by hydrogen peroxide. J Nucl Sci Technol. 2000;37(10):901–912. doi: 10.1080/18811248.2000.9714971
   Web of Science ®Google Scholar