Response Surface Methodology: A Retrospective and Literature Survey

References

• Abraham, B.; Chipman, H.; and Vijayan, K. (1999). “Some Risks in the Construction and Analysis of Supersaturated Designs”. Technometrics 41, pp. 135–141.
   Web of Science ®Google Scholar
• Aggarwal, M. L. and Bansal, A. (1998). “Robust Response Surface Designs for Quantitative and Qualitative Factors”. Communications in Statistics—Theory and Methods 27, pp. 89–106.
   Web of Science ®Google Scholar
• Aggarwal, M. L.; Gupta, B. C; and Bansal, A. (2000). “Small Robust Response-Surface Designs for Quantitative and Qualitative Factors”. American Journal of Mathematical and Management Sciences 39, pp. 103–130.
   Google Scholar
• Ames, A. E.; Mattucci, N.; MacDonald, S.; Szonyi, G.; and Hawkins, D. M. (1997). “Quality Loss Functions for Optimizations across Multiple Response Surfaces”. Journal of Quality Technology 29, pp. 339–346.
   Web of Science ®Google Scholar
• Andere-Rendon, J.; Montgomery, D. C.; and Rollier, D. A. (1997). “Design of Mixture Experiments Using Bayesian D-Optimality”. Journal of Quality Technology 29, pp. 451–163.
   Web of Science ®Google Scholar
• Ankenman, B. E. and Bisgaard, S. (1996). “Standard Errors for the Eigenvalues in Second-Order Response Surface Models”. Technometrics 38, pp. 238–246.
   Web of Science ®Google Scholar
• Ankenman, B. E.; Liu, H.; Karr, A. F.; and Picka, J. D. (2002). “A Class of Experimental Designs for Estimating a Response Surface and Variance Components”. Technometrics 44, pp. 45–54
   Web of Science ®Google Scholar
• Atkinson, A. C; Chanoler, K.; Herzberg, A. M.; and Juritz, J. (1993). “Optimum Experimental-Designs for Properties of a Compartmental Model”. Biometrics 49, pp. 325–337.
   PubMed Web of Science ®Google Scholar
• Atkinson, A. and Donev, A. N. (1992). Optimum Experimental Design. Clarendon Press, Oxford.
   Google Scholar
• Atkinson, A. C. and Haines, L. M. (1996). “Designs for Nonlinear and Generalized Linear Models” in the Handbook of Statistics North Holland Publishing Co., Amsterdam, pp. 437–475.
   Google Scholar
• Balkin, S. D. and Lin, D. K. J. (1998). “A Graphical Comparison of Supersaturated Designs”. Communications in Statistics—Theory and Practice 27, pp. 1289–1303.
   Web of Science ®Google Scholar
• Barnett, J.; Czitrom, V.; John, P. W. M; and Leon, R. V. (1997). “Using Fewer Wafers to Resolve Confounding in Screening Experiments” in Statistical Case Studies for Industrial Process Improvement edited by V. Czitrom and P.D. Spagon, SIAM, Philadelphia, PA., pp. 235–250.
   Google Scholar
• Barton R. R. (1992). “Metamodels for Simulation Input-Output Relations”. Winter Simulation Conference, pp. 289–299.
   Google Scholar
• Beattie, S. D.; Fong, D. K. H.; and Lin, D. K. J. (2002). “A Two-Stage Bayesian Model Selection Strategy for Supersaturated Designs”. Technometrics 44, pp. 55–63.
   Web of Science ®Google Scholar
• Bergman, B. and Hynen, A. (1997). “Dispersion Effects from Unreplicated Designs in the 2k–p Series”. Technometrics 39, pp. 191–198.
   Web of Science ®Google Scholar
• Berube, J. and Nair, V. N. (1998). “Exploiting the Inherent Structure in Robust Parameter Design Experiments”. Statistica Sinica 8, pp. 43–66.
   Web of Science ®Google Scholar
• Bingham, D. R. and Li, W. (2002). “A Class of Optimal Robust Parameter Designs”. Journal of Quality Technology 34, pp. 244–259.
   Web of Science ®Google Scholar
• Bingham, D. R. and Sitter, R. S. (1999a). “Minimum-Aberration Two-Level Fractional Factorial Split-Plot Designs”. Technometrics 41, pp. 62–70.
   Web of Science ®Google Scholar
• Bingham, D. R. and Sitter, R. S. (1999b). “Some Theoretical Results for Fractional Factorial Split-Plot Designs”. The Annals of Statistics 27, pp. 1240–1255.
   Web of Science ®Google Scholar
• Bingham, D. R. and Sitter, R. S. (2001). “Design Issues in Fractional Factorial Split-Plot Experiments”. Journal of Quality Technology 33, pp. 2–15.
   Web of Science ®Google Scholar
• Bisgaard, S. (2000). “The Design and Analysis of 2k–p × 2q–r Split Plot Experiments”. Journal of Quality Technology 32, pp. 39–56.
   Web of Science ®Google Scholar
• Bisgaard, S. and Kulahci, M. (2001). “Robust Product Design: Saving Trials With Split-Plot Confounding”. Quality Engineering 13, pp. 525–530.
   Google Scholar
• Bisgaard, S. and Steinberg, D. M. (1997). “The Design and Analysis of 2k–p × s Prototype Experiments”. Technometrics 39, pp. 52–62.
   Web of Science ®Google Scholar
• Blomkvist, O.; Hynen, A.; and Bergman, B. (1997). “A Method to Identify Dispersion Effects from Unreplicated Multilevel Experiments”. Quality and Reliability Engineering International 13, pp. 127–138.
   Web of Science ®Google Scholar
• Booth, K. H. V. and Cox, D. R. (1962). “Some Systematic Saturated Designs”. Technometrics 4, pp. 489–495.
   Web of Science ®Google Scholar
• Borkowski, J. J. (1995). “Spherical Prediction-Variance Properties of Central Composite Designs and Box-Behnken Designs”. Technometrics 37, pp. 399–410.
   Web of Science ®Google Scholar
• Borkowski, J. J. (2003a). “Using a Genetic Algorithm to Generate Small Exact Response Surface Designs”. Journal of Probability and Statistical Science 1, pp. 65–88.
   Google Scholar
• Borkowski, J. J. (2003b). “A Comparison of Prediction Variance Criteria for Response Surface Designs”. Journal of Quality Technology 35, pp. 70–77.
   Web of Science ®Google Scholar
• Borkowski, J. J. and Lucas, J. M. (1997). “Designs of Mixed Resolution for Process Robustness Studies”. Technometrics 37, pp. 63–70.
   Google Scholar
• Borkowski, J. J. and Valeroso, E. S. (2001). “Comparison of Design Optimality Criteria of Reduced Models for Response Surface Designs in the Hypercube”. Technometrics 43, pp. 468–477.
   Web of Science ®Google Scholar
• Borror, C. M. (1998). “Response Surface Methods for Experiments Involving Noise Variables”. Ph.D. Dissertation, Arizona State University, Tempe, AZ.
   Google Scholar
• Borror, C. M.; Heredia-Langner, A.; and Montgomery, D. C. 2002. “Generalized Linear Models in the Analysis of Industrial Experiments”. Journal of Propagations in Probability and Statistics (International Edition) 2, pp. 127–144.
   Google Scholar
• Borror, C. M. and Montgomery, D. C. (2000). “Mixed Resolution Designs as Alternatives to Taguchi Inner/Outer Array Designs for Robust Design Problems”. Quality and Reliability Engineering International 16, pp. 117–127.
   Web of Science ®Google Scholar
• Borror, C. M.; Montgomery, D. C.; and Myers, R. H. (2002). “Evaluation of Statistical Designs for Experiments Involving Noise Variables”. Journal of Quality Technology 34, pp. 54–70.
   Web of Science ®Google Scholar
• Box, G. E. P. (1985). “Discussion of ‘Off-Line Quality Control, Parameter Design and the Taguchi Method”. Journal of Quality Technology 17, pp. 198–206.
   Web of Science ®Google Scholar
• Box, G. E. P. (1988). “Signal-to-Noise Ratios, Performance Criteria, and Transformations” (with discussion). Technometrics 30, pp. 1–41.
   Web of Science ®Google Scholar
• Box, G. E. P. (1996). “Split-Plot Experiments”. Quality Engineering 8, pp. 515–520.
   Google Scholar
• Box, G. E. P. (1999). “Statistics as a Catalyst to Learning by Scientific Method Part II—A Discussion”. Journal of Quality Technology 31, pp. 16–29.
   Web of Science ®Google Scholar
• Box, G. E. P.; Bisgaard, S.; and Fung, C. A. (1988). “An Explanation and Critique of Taguchi's Contributions to Quality Engineering”. Quality and Reliability Engineering International 4, pp. 123–131.
   Google Scholar
• Box, G. E. P. and Draper, N. R. (1975). “Robust Designs”. Biometrika 62, pp. 347–352.
   Web of Science ®Google Scholar
• Box, G. E. P. and Draper, N. R. (1987). Empirical Model Building and Response Surfaces. John Wiley & Sons, New York, NY.
   Google Scholar
• Box, G. E. P. and Jones, S. (1992). “Split-Plot Designs for Robust Product Experimentation”. Journal of Applied Statistics 19, pp. 3–26.
   Google Scholar
• Box, G. E. P. and Jones, S. (2001). “Split-Plots for Robust Product and Process Experimentation”. Quality Engineering 13, pp. 127–134.
   Google Scholar
• Box, G. E. P. and Liu, P. Y. T. (1999). “Statistics as a Catalyst to Learning by Scientific Method Part I—An Example”. Journal of Quality Technology 31, pp. 1–15.
   Web of Science ®Google Scholar
• Box, G. E. P. and Tyssedal, J. (1996). “Projective Properties of Certain Orthogonal Arrays”. Biometrika 83, pp. 950–955.
   Web of Science ®Google Scholar
• Box, G. E. P. and Tyssedal, J. (2001). “Sixteen Run Designs of High Projectivity for Factor Screening”. Communications in Statistics: Simulation and Computation 30, pp. 217–228.
   Web of Science ®Google Scholar
• Box, G. E. P. and Wilson, K. B. (1951). “On the Experimental Attainment of Optimum Conditions”. Journal of the Royal Statistical Society B 13, pp. 1–45.
   Google Scholar
• Brenneman, W. A. and Nair, V. N. (2001). “Methods for Identifying Dispersion Effects in Unreplicated Factorial Experiments: A Critical Analysis and Proposed Strategies”. Technometrics 43, pp. 388–405.
   Web of Science ®Google Scholar
• Brenneman, W. A. and Myers, W. R. (2003). “Robust Parameter Design with Categorical Noise Variables”. Journal of Quality Technology 35, pp. 335–341.
   Web of Science ®Google Scholar
• Brinkley, P; Meyer, K.; and Lu, J. (1996). “Combined Generalized Linear Modelling-Non-linear Programming Approach to Robust Process Design—A Case-study in Circuit Board Quality Improvement”. Journal of the Royal Statistical Society Series C 45, pp. 99–110.
   Google Scholar
• Cantell, B. and Ramirez, J. G. (1994). “Robust Design of a Polysilicon Deposition Process Using a Split-Plot Analysis”. Quality Reliability Engineering International 10, pp. 123–132.
   Web of Science ®Google Scholar
• Carlyle, W. M.; Montgomery, D. C.; and Runger, G. C. (2000). “Optimization Problems and Methods in Quality Control and Improvement” (with discussion). Journal of Quality Technology 32, pp. 1–17.
   Web of Science ®Google Scholar
• Chanoler, K. and Verdinelli, I. (1995). “Bayesian Experimental Design: A Review”. Statistical Science 10, pp. 273–304.
   Web of Science ®Google Scholar
• Cheng, C. S. (1995). “Some Projection Properties of Orthogonal Arrays”. Annals of Statistics 23, pp. 1223–1233.
   Web of Science ®Google Scholar
• Cheng, S.-W. and Wu, C. F. J. (2001). “Factor Screening and Response Surface Exploration” (with discussion). Statistica Sinica 11, pp. 553–604.
   Web of Science ®Google Scholar
• Chiao, C.-H. and Hamada, M. (2001). “Analyzing Experiments with Correlated Multiple Responses”. Journal of Quality Technology 33, pp. 451–465.
   Web of Science ®Google Scholar
• Chipman, H. (1998). “Handling Uncertainty in Analysis of Robust Design Experiments”. Journal of Quality Technology 30, pp. 11–17.
   Web of Science ®Google Scholar
• Chipman, H. and Hamada, M. S. (1996). “Discussion: Factor-Based or Effect-Based Modeling? Implications for Design”. Technometrics 38, pp. 317–320.
   Google Scholar
• Copeland, K. A. F. and Nelson, P. R. (1996). “Dual Response Optimization via Direct Function Minimization”. Journal of Quality Technology 28, pp. 331–336.
   Web of Science ®Google Scholar
• Cornell, J. A. (1988). “Analyzing Data from Mixture Experiments Containing Process Variables: A Split-Plot Approach”. Journal of Quality Technology 20, pp. 2–23.
   Web of Science ®Google Scholar
• Cornell, J. A. (2002). Experiments with Mixtures 3rd Ed. John Wiley and Sons, New York, NY.
   Google Scholar
• Del castillo, E. (1996). “Multiresponse Process Optimization via Constrained Confidence Regions”. Journal of Quality Technology 28, pp. 61–70.
   Web of Science ®Google Scholar
• Del Castillo, E.; Fan, S. K.; and Semple, J. (1999). “Optimization of Dual Response Systems: A Comprehensive Procedure for Degenerate and Nondegenerate Problems”. European Journal of Operational Research 112, pp. 174–186.
   Web of Science ®Google Scholar
• Del Castillo, E. and Montgomery, D. C. (1993). “A Nonlinear Programming Solution to the Dual Response Problem”. Journal of Quality Technology 25, pp. 199–204.
   Web of Science ®Google Scholar
• Del Castillo, E.; Montgomery, D. C.; and McCarville, D. (1996). “Modified Desirability Functions for Multiple Response Optimization”. Journal of Quality Technology 28, pp. 337–345.
   Web of Science ®Google Scholar
• Deng, L. Y.; Lin, D. K. J.; and Wang, J. N. (1996a). “Marginally Oversaturated Designs”. Communications in Statistics 25, pp. 2557–2573.
   Google Scholar
• Deng, L. Y.; Lin, D. K. J.; and Wang, J. N. (1996b). “A Measure of Multifactor Nonorthogonality”. Statistics and Probability Letters 28, pp. 203–209.
   Web of Science ®Google Scholar
• Derringer, G. C. and Suich, R. (1980). “Simultaneous Optimization of Several Response Variables”. Journal of Quality Technology 12, pp. 214–219.
   Web of Science ®Google Scholar
• Donohue, J. M. (1994). “Experimental Designs for Simulation”. Winter Simulation Conference pp. 200–206.
   Google Scholar
• Draper, N. R. (1985). “Small Composite Designs”. Technometrics 27, pp. 173–180.
   Web of Science ®Google Scholar
• Draper, N. R.; Davis, T. P.; Pozueta, L.; and Grove, D. (1994). “Isolation of Degrees of Freedom for Box-Behnken Designs”. Technometrics 36, pp. 283–291.
   Web of Science ®Google Scholar
• Draper, N.; Gaffke, N.; and Pukelsheim, F. (1991). “First and Second Order Rotatability of Experimental Designs, Moment Matrices, and Information Surfaces”. Metrika 38, pp. 129–161.
   Google Scholar
• Draper, N.; Gaffke, N.; and Pukelsheim, F. (1993). “Rotatability of Variance Surfaces and Moment Matrices”. Journal of Statistical Planning and Inference 36, pp. 347–356.
   Web of Science ®Google Scholar
• Draper, N.; Heiligers, B; and Pukelsheim, F. (1996). “An Optimal Third-Order Rotatable Designs”. Annals of Institute of Statistical Mathematics 48, pp. 395–402.
   Web of Science ®Google Scholar
• Draper, N. and John, J. A. (1988). “Response Surface Designs for Quantitative and Qualitative Variables”. Technometrics 30, pp. 423–428.
   Web of Science ®Google Scholar
• Draper, N. and John, J. A. (1998). “Response Surface Designs where levels of Some Factors Are Difficult to Change”. Australian and New Zealand Journal of Statistics 40, pp. 487–495.
   Web of Science ®Google Scholar
• Draper, N. and Lin, D. K. J. (1990). “Small Response Surface Designs”. Technometrics 32, pp. 187–194.
   Web of Science ®Google Scholar
• Draper, N. and Lin, D. K. J. (1995). “Characterizing Projected Designs- Repeat and Mirror Image Runs”. Communications in Statistics—Theory and Methods 24, pp. 775–795.
   Web of Science ®Google Scholar
• Draper, N. and Lin, D. K. J. (1996). “Response Surface Designs”. Chapter 11 in Handbook of Statistics, Vol. 13, Design and Analysis of Experiments edited by S. Ghosh and C.R. Rao. Elsevier Science, Amsterdam, pp. 343–375.
   Google Scholar
• Draper, N. and Pukelsheim, F. (1990). “Another Look at Rotatability”. Technometrics 32, pp. 195–202.
   Web of Science ®Google Scholar
• Draper, N. and Pukelsheim, F. (1994). “On Third-Order Rotatability”. Metrika 41, pp. 137–161.
   Google Scholar
• Draper, N. and Pukelsheim, F. (1996). “An Overview of Design of Experiments”. Statistical Papers 37, pp. 1–32.
   Web of Science ®Google Scholar
• Draper, N. and Pukelsheim, F. (1998). “Polynomial Representations for Response Surface Modeling”. New Developments and Applications in Experimental Designs. IMS Lecture Notes—Monograph Series 34, pp. 199–212.
   Google Scholar
• Draper, N. and Ying, L. H. (1994). “A Note on Slope Rotatability over all Directions”. Journal of Statistical Planning and Inference 41, pp. 113–119.
   Web of Science ®Google Scholar
• DuMochel, W. and Jones, B. (1994). “A Simple Bayesian Modification of D-optimal Designs to Reduce Dependence on an Assumed Model”. Technometrics 13, pp. 682–688.
   Google Scholar
• Engel, J. (1992). “Modelling Variation in Industrial Experiments”. Applied Statistics 41, pp. 579–593.
   Web of Science ®Google Scholar
• Engel, J. and Huele, A. F. (1996). “Taguchi Parameter Design by Second-Order Response Surfaces”. Quality and Reliability Engineering International 12, pp. 95–100.
   Web of Science ®Google Scholar
• Fan, S.-K. S. (2000). “A Generalized Global Optimization Algorithm for Dual Response Systems”. Journal of Quality Technology 32, pp. 444–456.
   Web of Science ®Google Scholar
• Fang, K.-T.; Lin, D. K. J.; Winker, P.; and Zhang, Y. (2000). “Uniform Design: Theory and Applications”. Technometrics 42, pp. 237–248.
   Web of Science ®Google Scholar
• Federer, W. T. and Meredith, M. P. (1992). “Covariance Analysis for Split-Plot and Split-Block Designs”. The American Statistician 46, pp. 155–162.
   Web of Science ®Google Scholar
• Ferrer, A. J. and Romero, R. (1993). “Small Samples Estimation of Dispersion Effects from Unreplicated Data”. Communications in Statistics—Simulation and Computation 22, pp. 975–995.
   Web of Science ®Google Scholar
• Ferrer, A. J. and Romero, R. (1995). “A Simple Method to Study Dispersion Effects from Non-necessary Replicated Data in Industrial Context”. Quality Engineering 7, pp. 747–755.
   Google Scholar
• Ford, I.; Torsney, B.; and Wu, C. F. (1992). “The Use of a Canonical Form in the Construction of Locally Optimal Designs for Nonlinear Problems”. Journal of the Royal Statistical Society Series B 54, pp. 569–583.
   Google Scholar
• Freeny, A. E. and Landwehr, J. M. (1995). “Graphical Analysis for a Large Designed Experiment”. Technometrics 37, pp. 1–14.
   Web of Science ®Google Scholar
• Ganju, J. and Lucas, J. M. (1997). “Bias in Test Statistics When Restrictions in Randomization are Caused by Factors”. Communications in Statistics—Theory and Methods 26, pp. 47–63.
   Web of Science ®Google Scholar
• Ganju, J. and Lucas, J. M. (1999). “Detecting Randomization Restrictions Caused by Factors”. Journal of Statistical Planning and Inference 81, pp. 129–140.
   Web of Science ®Google Scholar
• Ghosh, S. and Duh, Y.-J. (1992). “Determination of Optimum Experimental Conditions using Dispersion Main Effects and Interactions of Factors in Replicated Factorial Experiments”. Journal of Applied Statistics 19, pp. 367–378.
   Google Scholar
• Giovannitti-Jensen, A. and Myers, R. H. (1989). “Graphical Assessment of the Prediction Capability of Response Surface Designs”. Technometrics 31, pp. 159–171.
   Web of Science ®Google Scholar
• Galdfarb, H. B.; Borror, C. M.; and Montgomery, D. C. (2003). “Mixture Process Experiments with Noise Variables”. Journal of Quality Technology 35, pp. 393–405.
   Web of Science ®Google Scholar
• Goos, P. and Vandebroek, M. (2001). “Optimal Split-Plot Designs”. Journal of Quality Technology 33, pp. 436–450.
   Web of Science ®Google Scholar
• Grego, J. M. (1993). “Generalized Linear Models and Process Variation”. Journal of Quality Technology 25, pp. 288–295.
   Web of Science ®Google Scholar
• Haaland, P.; McMillan, N.; Nycha, D.; and Welch, W. (1994). “Analysis of Space-Filling Designs,” Computing Science and Statistics, Computationally Intensive Statistical Methods. Proceedings of the 26^th Symposium on the Interface. Interface Foundation of North America, Fairfax Station, VA, pp. 111–120.
   Google Scholar
• Hader, R. and Park, S. H. (1978). “Slope-Rotatable Central Composite Designs”. Technometrics 20, pp. 413–417.
   Web of Science ®Google Scholar
• Haines, L. M. (1987). “The Application of the Annealing Algorithm to the Construction of the Exact Optimal Designs for Linear-Regresison Models”. Technometrics 29, pp. 4394–437.
   Web of Science ®Google Scholar
• Hamada, M.; Martz, H. F.; Reese, C. S.; and Wilson, A. G. (2001). “Finding Near-Optimal Bayesian Experimental Designs via Genetic Algorithms”. The American Statistician 55, pp. 175–181.
   Web of Science ®Google Scholar
• Heise, M. A. and Myers, R. H. (1996). “Optimal Designs for Bivariate Logistic Regression”. Biometrics 52, pp. 613–624.
   Web of Science ®Google Scholar
• Heredia-Langner, A; Carlyle, W. M.; Montgomery, D. C.; Borror, C. M.; and Runger, G. C. (2003) “Genetic Algorithms for the Construction of D-Optimal Designs”. Journal of Quality Technology 35, pp. 28–46.
   Web of Science ®Google Scholar
• Heredia-Langner, A.; Carlyle, W. M.; Montgomery, D. C.; and Borror, C. M. (2004). “Model-Robust Optimal Designs: A Genetic Algorithm Approach”. To appear in the Journal of Quality Technology
   Google Scholar
• Heredia-Langner, A.; Loredo, E. N.; Montgomery, D. C.; and Gritton, A. H. (2000). “Optimization of a Bonded Leads Process Using Statistically Designed Experiments”. Robotics and Computer Integrated Manufacturing 16, pp. 377–382.
   Web of Science ®Google Scholar
• Hill, W. J. and Hunter, W. G. (1966). “A Review of Response Surface Methodology: A Literature Review”. Technometrics 8, pp. 571–590.
   Web of Science ®Google Scholar
• Holcomb, D. R. and Carlyle, W. M. (2002). “Some Notes on the Construction and Evaluation of Supersaturated Designs”. Quality and Reliability Engineering International 18, pp. 299–304.
   Web of Science ®Google Scholar
• Holcomb, D. R.; Montgomery, D. C.; and Carlyle, W. M. (2003). “Analysis of Supersaturated Designs”. Journal of Quality Technology 35, pp. 13–27.
   Web of Science ®Google Scholar
• Hooke, R. and Jeeves, T. A. (1961). “Direct Search Solution of Numerical and Statistical Problems”. Journal of the Association of Computing Machinery 8, pp. 212–229.
   Google Scholar
• Huang, P.; Chen, D.; and Voelkel, J. O. (1998). “Minimum-Aberration Two-Level Split-Plot Designs”. Technometrics 40, pp. 314–326.
   Web of Science ®Google Scholar
• Jia, Y. and Myers, R. H. (2001). “Experimental Designs for Logistic Models in Two Design Variables”. Technical Report number 01–9, Department of Statistics, Virginia Tech, Blacksburg, VA.
   Google Scholar
• Johnson, M. E.; Moore, L. M.; and Ylvisaker, D. (1990). “Minimax and Maximin Distance Designs”. Journal of Statistical Planning and Inference 36, pp. 131–148.
   Web of Science ®Google Scholar
• Kackar, R. (1985). “Off-Line Quality Control, Parameter Designs, and the Taguchi Methods” (with discussion). Journal of Quality Technology 17, pp. 176–188.
   Web of Science ®Google Scholar
• Kalish, L. A. (1990). “Efficient Design for Estimation of Median Lethal Dose and Quantal Dose-Response Curves”. Biometrics 46, pp. 737–748.
   PubMed Web of Science ®Google Scholar
• Khattree, R. (1996). “Robust Parameter Design: A Response Surface Approach”. Journal of Quality Technology 28, pp. 187–198.
   Web of Science ®Google Scholar
• Khuri, A. I. (1988). “A Measure of Rotatability for Response Surface Designs”. Technometrics 30, pp. 95–104.
   Web of Science ®Google Scholar
• Khuri, A. I. (1990). “Analysis of Multiresponse Experiments: A Review” in Statistical Design and Analysis of Industrial Experiments edited by S. Ghosh, Marcel Dekker, New York, NY, pp. 231–246.
   Google Scholar
• Khuri, A. I. (1992). “Diagnostic Results Concerning a Measure of Rotatability”. Journal of the Royal Statistical Society Series B 54, pp. 253–267.
   Google Scholar
• Khuri, A. I. and Conlon, M. (1981). “Simultaneous-Optimization of Multiple Responses Represented by Polynomial Regression-Functions”. Technometrics 23, pp. 363–375.
   Web of Science ®Google Scholar
• Khuri, A. I. and Cornell, J. A. (1996). Response Surfaces: Designs and Analyses 2nd ed. Marcel Dekker, New York.
   Google Scholar
• Khuri, A. I.; Harrison, J. M.; and Cornell, J. A. (1999). “Using Quantile Plots of the Prediction Variance for Comparing Designs for a Constrained Mixture Region: An Application Involving a Fertilizer Experiment”. Journal of the Royal Statistical Society Series C 48, pp. 521–532.
   Google Scholar
• Khuri, A. I.; Kim, H. J.; and Um, Y. (1996). “Quantile Plots of the Prediction Variance for Response Surface Designs”. Computational Statistics and Data Analysis 22, pp. 395–407.
   Web of Science ®Google Scholar
• Kim, W. B. and Draper, N. R. (1994). “Choosing a Design for Straight Line Fits to Two Correlated Responses”. Statistica Sinica 4, pp. 275–280.
   Web of Science ®Google Scholar
• Kim, K-J. and Lin, D. K. J. (1998). “Dual Response Surface Optimization: A Fuzzy Modeling Approach”. Journal of Quality Technology 1, pp. 1–10.
   Google Scholar
• Kim, K-J. and Lin, D. K. J. (2000). “Simultaneous Optimization of Mechanical Properties of Steel by Maximizing Experimental Desirability Functions”. Journal of the Royal Statistical Society Series C 49, pp. 311–325.
   Google Scholar
• Kowalski, S. M. (1999). “The Design and Analysis of Split-Plot Experiments in Industry”. Ph.D. Dissertation, University of Florida, Gainesville, FL.
   Google Scholar
• Kowalski, S. M. (2002). “24 Run Split-Plot Experiments for Robust Parameter Design”. Journal of Quality Technology 34, pp. 399–410.
   Web of Science ®Google Scholar
• Kowalski, S. M., Cornell, J. A.; and Vining, G. G. (2002). “Split-Plot Designs and Estimation Methods for Mixture Experiments with Process Variables”. Technometrics 44, pp. 72–79.
   Web of Science ®Google Scholar
• Kraft, O. and Schaefer, M. (1992). “D-Optimal Designs for a Multivariate Regression Model”. Journal of Multivariate Analysis 42, pp. 130–140.
   Web of Science ®Google Scholar
• Kuhn, A. M.; Carter, W. H.; and Myers, R. H. (2000). “Incorporating Noise Factors into Experiments with Censored Data”. Technometrics V42, pp. 376–383.
   Google Scholar
• Langsrud, O. (2001). “Identifying Significant Effects in Fractional Factorial Multiresponse Experiments”. Technometrics 43, pp. 415–424.
   Web of Science ®Google Scholar
• Lasdon, L.; Fox, R.; and Ratner, M. (1974). “Nonlinear Optimization Using Generalized Reduced Gradient Method”. Revue Francaise D Automatique Informatique Recherche Operationnelle 8, pp. 73–103.
   Google Scholar
• Lawson, J. (2003). “One-Step Screening and Process optimization Experiments”. The American Statistician 57, pp. 15–20.
   Web of Science ®Google Scholar
• Lee, Y. and Nelder, J. A. (1998). “Joint Modeling of Mean and Dispersion”. Technometrics 40, pp. 168–171.
   Web of Science ®Google Scholar
• Lee, Y. and Nelder, J. A. (2003). “Robust Designs via Generalized Linear Models”. Journal of Quality Technology 35, pp. 2–12.
   Web of Science ®Google Scholar
• Letsinger, J. D.; Myers, R. H.; and Lentner, M. (1996). “Response Surface Methods for Bi-Randomization Structures”. Journal of Quality Technology 28, pp. 381–397.
   Web of Science ®Google Scholar
• Lewis, S. L.; Montgomery, D. C.; and Myers, R. H. (1999–2000). “The Analysis of Designed Experiments with Nonnormal Responses”. Quality Engineering 12, pp. 225–244.
   Google Scholar
• Lewis, S. L.; Montgomery, D. C.; and Myers, R. H. (2001a). “Examples of Designed Experiments with Nonnormal Responses”. Journal of Quality Technology 33, pp. 265–278.
   Web of Science ®Google Scholar
• Lewis, S. L.; Montgomery, D. C.; and Myers, R. H. (2001b). “Confidence Interval Coverage for Designed Experiments Analyzed with Generalized Linear Models”. Journal of Quality Technology 33, pp. 279–292.
   Web of Science ®Google Scholar
• Lewis, S. M. and Dean, A. M. (2001). “Detection of Interactions in Experiments on Large Numbers of Factors”. Journal of the Royal Statistical Society Series B 63, pp. 633–672.
   Google Scholar
• Li, H. and Mee, R. W. (2002). “Better Foldover Fractions for Resolution III 2k∼p Designs”. Technometrics 44, pp. 278–283.
   Web of Science ®Google Scholar
• Li, W. and Nachtsheim, C. J. (2000). “Model-Robust Factorial Designs”. Technometrics 42, pp. 345–352.
   Web of Science ®Google Scholar
• Li, W. W. and Wu, C. F. J. (1997). “Columnwise-Pairwise Algorithms with Applications to the Construction of Supersaturated Designs”. Technometrics 39, pp. 171–179.
   Web of Science ®Google Scholar
• Lin, D. K. J. (1993a). “A New Class of Supersaturated Designs”. Technometrics 35, pp. 28–31.
   Web of Science ®Google Scholar
• Lin, D. K. J. (1993b), “Another Look at First-Order Saturated Designs: The p-Efficient Designs”. Technometrics 35, pp. 284–292.
   Web of Science ®Google Scholar
• Lin, D. K. J. (1995). “Generating Systematic Supersaturated Designs”. Technometrics 37, pp. 255–264.
   Web of Science ®Google Scholar
• Lin, D. K. J. (2000). “Recent Developments in Supersaturated Designs” in Statistical Process Monitoring and Optimization edited by S. H. Park and G. G. Vining, Marcel Dekker, New York, NY, pp. 305–320.
   Google Scholar
• Lin, D. K. J. and Draper, N. (1992). “Projection Properties of Plackett and Burman Designs”. Technometrics 34, pp. 423–428.
   Web of Science ®Google Scholar
• Lin, D. K. J. and Draper, N. (1993). “Generating Alias Relationships for Two-Level Plackett-Burman Designs”. Computational Statistics and Data Analysis 15, pp. 147–157.
   Web of Science ®Google Scholar
• Lin, D. K. J. and Tu, W. (1995). “Dual Response Surface Optimization”. Journal of Quality Technology 27, pp. 248–260.
   Web of Science ®Google Scholar
• Lin, H. F.; Myers, R. H.; and Ye, K. Y. (2000). “Bayesian Two-stage Optimal Design for Mixture Models”. Journal of Statistical Computation and Simulation 66, pp. 209–231.
   Web of Science ®Google Scholar
• Lind, E. E.; Goldin, J.; and Hickman, J. B. (1960). “Fitting Yield and Cost Response Surfaces”. Chemical Engineering Progress 56, p. 62.
   Google Scholar
• Lucas, J. M. (1989). “Achieving a Robust Process Using Response Surface Methodology”. Paper presented at American Statistical Association Conference, Washington, D.C.
   Google Scholar
• Lucas, J. M. (1994). “How to Achieve a Robust Process Using Response Surface Methodology”. Journal of Quality Technology 26, pp. 248–260.
   Web of Science ®Google Scholar
• Lucas, J. M. and Hazel, M. C. (1997). “Running Experiments With Multiple Error Terms: How an Experiment is Run is Important”. ASQC Technical Conference Transactions, American Society for Quality Control, Milwaukee, WI, pp. 283–296.
   Google Scholar
• Lucas, J. M. and Ju, H. L. (1992). “Split Plotting and Randomization in Industrial Experiments”. ASQC Quality Congress Transactions, American Society for Quality Control, Nashville, TN, pp. 374–382.
   Google Scholar
• Lunani, M.; Nair, V. N.; and Wasserman, G. S. (1997). “Graphical Methods for Robust Parameter Design with Dynamic Characteristics”. Journal of Quality Technology 29, pp. 327–338
   Web of Science ®Google Scholar
• Mathew, T. and Sinha, B. K. (1992). “Exact and Optimum Tests in Unbalanced Split-Plot Designs Under Mixed and Random Models”. Journal of the American Statistical Association 87, pp. 192–200.
   Web of Science ®Google Scholar
• Mays, D. P. and Myers, R. H. (1996). “Bayesian Approach for the Design and Analysis of a Two Level Factorial Experiment in the Presence of Dispersion Effects”. Communications in Statistics—Theory and Methods 25, pp. 1409–1428.
   Web of Science ®Google Scholar
• McCullough, C. and Nelder, J. A. (1989). Generalized Linear Models 2nd ed. Chapman and Hall, New York, NY.
   Google Scholar
• McGrath, R. N. and Lin, D. K. J. (2001a). “Confounding of Location and Dispersion Effects in Unreplicated Fractional Factorials”. Journal of Quality Technology 33, pp. 129–139.
   Web of Science ®Google Scholar
• McGrath, R. N. and Lin, D. K. J. (2001b). “Testing Multiple Dispersion Effects in Unreplicated Fractional Factorial Designs”. Technometrics 43, pp. 406–414.
   Web of Science ®Google Scholar
• McKay M. D.; Beckman, R. J.; and Conover, W. J. (1979). “A Comparison of Three Methods for selecting Values of Input Variables in the Analysis of Output from a Computer Code”. Technometrics 21, pp. 239–245.
   Web of Science ®Google Scholar
• Mead, R. and Pike, D. J. (1975). “A Review of Response Surface Methodology from a Biometrics Viewpoint”. Biometrics 31, pp. 803–851.
   PubMed Web of Science ®Google Scholar
• Mee, R. W. (2001). “Noncentral Composite Designs”. Technometrics 43, pp. 34–43.
   Web of Science ®Google Scholar
• Mee, R. W. (2002). “Three-Level Simplex Designs and Their Use in Sequential Experimentation”. Journal of Quality Technology 34, pp. 152–164.
   Web of Science ®Google Scholar
• Mee, R. W. and Bates, R. L. (1998). “Split-Lot Designs: Experiments for Multistage Batch Processes”. Technometrics 40, pp. 127–140.
   Web of Science ®Google Scholar
• Mee, R. W. and Peralta, M. (2000). “Semifolding 2k–p Designs”. Technometrics 42, pp. 122–134.
   Web of Science ®Google Scholar
• Meyer, R. D.; Steinberg, D. M.; and Box, G. E. P. (1996). “Follow-Up Designs to Resolve the Confounding in Multifactor Experiments”. Technometrics 38, pp. 303–313.
   Web of Science ®Google Scholar
• Miller, A. (1997). “Strip-Plot Configurations of Fractional-Factorials”. Technometrics 39, pp. 153–161.
   Web of Science ®Google Scholar
• Miller, A. (2002). “Analysis of Parameter Design Experiments for Signal-Response Systems”. Journal of Quality Technology 34, pp. 139–151.
   Web of Science ®Google Scholar
• Miller, A. and Wu, C. F. J. (1996). “Parameter Design for Signal-Response Systems: A Different Look at Taguchi's Dynamic Parameter Design”. Statistical Science 11, pp. 122–136.
   Web of Science ®Google Scholar
• Montepiedra, G.; Myers, D.; and Yeh, A. B. (1998). “Application of Genetic Algorithms to the Construction of Exact D-Optimal Designs”. Journal of Applied Statistics 25, pp. 817–826.
   Web of Science ®Google Scholar
• Montgomery, D. C. (1990–91). “Using Fractional Factorial Designs for Robust Process Development”. Quality Engineering 3, pp. 193–205.
   Google Scholar
• Montgomery, D. C. (1992). “The Use of Statistical Process Control and Design of Experiments in Product and Process Improvement”. IIE Transactions 24, pp. 4–17.
   Web of Science ®Google Scholar
• Montgomery, D. C. (1999). “Experimental Design for Product and Process Design and Development” (with Commentary). Journal of the Royal Statistical Society Series D 48, pp. 159–177.
   Google Scholar
• Montgomery, D. C. (2001). Design and Analysis of Experiments 5th ed. John Wiley & Sons, Inc., New York, NY.
   Google Scholar
• Montgomery, D. C. and Borror, C. M. (2001). “Discussion of ‘Factor Screening and Response Surface Exploration’ by Cheng and Wu”. Statistica Sinica 11, pp. 591–595.
   Web of Science ®Google Scholar
• Montgomery, D. C. and Runger, G. C. (1996). “Foldovers of 2k–p Resolution IV Experimental Designs”. Journal of Quality Technology 28, pp. 446–450.
   Web of Science ®Google Scholar
• Morris, M. (2000). “A Class of Three-Level Experimental Designs for Response Surface Modeling”. Technometrics 42 pp. 111–121.
   Web of Science ®Google Scholar
• Mukerjee, R. and Huda, S. (1985). “Minimax Second and Third-Order Designs to Estimate the Slope of a Response Surface”. Biometrika 72, pp. 173–178.
   Web of Science ®Google Scholar
• Murty, V. N. and Studden, W. J. (1972). “Optimal Designs for Estimating the Slope of a Polynomial Regression”. Journal of the American Statistical Association 67, pp. 869–873.
   Web of Science ®Google Scholar
• Myers, R. H. (1991). “Response Surface Methodology in Quality Improvement”. Communications in Statistics—Theory and Methods 20, pp. 457–476.
   Web of Science ®Google Scholar
• Myers, R. H. (1999). “Response Surface Methodology—Current Status and Future Directions” (with discussion). Journal of Quality Technology 31, pp. 30–44.
   Web of Science ®Google Scholar
• Myers, R. H. and Carter, W. H. (1973). “Response Surface Techniques for Dual Response Systems”. Technometrics 15. pp. 301–317.
   Web of Science ®Google Scholar
• Myers, R. H.; Khuri, A. I.; and Carter, W. H. (1989). “Response Surface Methodology: 1966–1988”. Technometrics 31, pp. 137–157.
   Web of Science ®Google Scholar
• Myers, R. H.; Khuri, A. I.; and Vining, G. G. (1992). “Response Surface Alternatives to the Taguchi Robust Parameter Design Approach”. American Statistician 46, pp. 131–139.
   Web of Science ®Google Scholar
• Myers, R. H.; Kim, Y.; and Griffiths, K. (1997). “Response Surface Methods and the Use of Noise Variables”. Journal of Quality Technology 29, pp. 429–441.
   Web of Science ®Google Scholar
• Myers, R. H. and Lahoda, S. J. (1975). “A Generalization of the Response Surface Mean Square Error Criterion with a Specific Application to the Slope”. Technometrics 17, pp. 481–486.
   Web of Science ®Google Scholar
• Myers, R. H. and Montgomery, D. C. (2002). Response Surface Methodology, Process and Product Optimization Using Designed Experiments 2nd ed. John Wiley & Sons, New York, NY.
   Google Scholar
• Myers, R. H.; Montgomery, D. C.; and Vining, G. G. (2002). Generalized Linear Models with Applications in Engineering and the Sciences. John Wiley and Sons, Inc., New York, NY.
   Google Scholar
• Myers, W. R.; Myers, R. H.; and Carter, W. H. (1994). “Some Alphabetic Optimal Designs for the Logistic Regression Model”. Journal of Statistical Planning and Inference 42, pp. 57–77.
   Web of Science ®Google Scholar
• Myers, R. H.; Vining, G. G.; Giovannitti-Jensen, A.; and Myers, S. L. (1992). “Variance Dispersion Properties of Second-Order Response Surface Designs”. Journal of Quality Technology 24, pp. 1–11.
   Web of Science ®Google Scholar
• Nair, V. N. et al (Editors) (1992). “Taguchi's Parameter Design: A Panel Discussion”. Technometrics 34, pp. 127–161.
   Web of Science ®Google Scholar
• Nelder, J. A. and Lee, Y. (1991). “Generalized Linear Models for the Analysis of Taguchi-Type Experiments”. Applied Stochastic Models and Data Analysis 7, pp. 107–120.
   Google Scholar
• Nelder, J. A. and Wedderburn, R. W. M. (1972). “Generalized Linear Models”. Journal of the Royal Statistical Society A 135, pp. 370–384.
   Google Scholar
• Nelson, B. J.; Montgomery, D. C.; Elias, R. J.; and Maass, E. (2000). “A Comparison of Several Design Augmentation Strategies”. Quality and Reliability Engineering International 16, pp. 435–449.
   Web of Science ®Google Scholar
• Nelson, L. S. (1985). “What Do Low F Ratios Tell You?” Journal of Quality Technology 17, pp. 237–238.
   Web of Science ®Google Scholar
• Nesterov, Y. and Nemirovskii, A. (1994). Interior-Point Polynomial Algorithms in Convex Programming. Society for Industrial and Applied Mathematics, Philadelphia, PA.
   Google Scholar
• Nguyen, N.-K. (1996). “An Algorithmic Approach to Generating Supersaturated Designs”. Technometrics 38, pp. 69–73.
   Web of Science ®Google Scholar
• O'Connell, M.; Haaland, P.; Hardy, S.; and Nychka, D. (1995). “Nonparametric Regression, Kriging, and Process Optimization” in Statistical Modeling Springer Verlag, NY, pp. 207–214.
   Google Scholar
• O'Neill, J. C; Borror, C. M.; Eastman, P. Y.; Fradkin, D. G.; James, M. P.; Marks, A. P.; and Montgomery, D. C. (2000). “Optimal Assignment of Samples to Treatments for Robust Design”. Quality and Reliability Engineering International 16, pp. 417–22.
   Web of Science ®Google Scholar
• Pan, G. and Santner, T. J. (1998). “Selection and Screening Procedures to Determine Optimal Product Designs”. Journal of Statistical Planning and Inference 67, pp. 311–330.
   Web of Science ®Google Scholar
• Park, S. H. (1987). “A Class of Multifactor Designs for Estimating the Slope of Response Surfaces”. Technometrics 29, pp. 449–453.
   Web of Science ®Google Scholar
• Peipel, G. and anderson, C. M. (1992). “Variance Dispersion Graphs for Designs on Polyhedral Regions”. Proceedings of the Section on Physical and Engineering Sciences American Statistical Association, Alexandria, VA. pp. 111–117.
   Google Scholar
• Peipel, G.; Anderson, C. M.; and Redgate, P. E. (1993a). “Variance Dispersion Graphs for Designs on Polyhedral Regions—Revisited”. Proceedings of the Section on Physical and Engineering Sciences American Statistical Association, Alexandria, VA, pp. 102–107.
   Google Scholar
• Peipel, G.; Anderson, C. M.; and Redgate, P. E. (1993b). “Response Surface Designs for Irregularly-Shaped Regions (Parts 1, 2, and 3)”. Proceedings of the Section on Physical and Engineering Sciences American Statistical Association, Alexandria, VA, pp. 205–227.
   Google Scholar
• Phadke, M. S. (1989). Quality Engineering Using Robust Design. Prentice Hall, Englewood Cliffs, NJ.
   Google Scholar
• Pignatiello, J. J., Jr. (1993). “Strategies for Robust Multiresponse Quality Engineering”. IIE Transactions 25, pp. 5–15.
   Web of Science ®Google Scholar
• Pignatiello, J. J., Jr. and Ramberg, J. S. (1991). “Top Ten Triumphs and Tragedies of Genichi Taguchi”. Quality Engineering 4, pp. 211–225.
   Google Scholar
• Pledger, M. (1996). “Observable Uncontrollable Factors in Parameter Design”. Journal of Quality Technology 28, pp. 153–162.
   Web of Science ®Google Scholar
• Remmenga, M. D. and Johnson, D. E. (1995). “A Comparison of Inference Procedures in Unbalanced Split-Plot Designs”. Journal of Statistical Computation and Simulation 51, pp. 353–367.
   Web of Science ®Google Scholar
• Rice, J. (1995). Mathematical Statistics and Data Analysis 2nd ed. Wadsworth & Brooks/Cole, Pacific Grove, CA.
   Google Scholar
• Rosenbaum, P. R. (1994). “Dispersion Effects from Fractional Factorials in Taguchi's Method of Quality Design”. Journal of the Royal Statistical Society B 56, pp. 641–652.
   Google Scholar
• Rosenbaum, P. R. (1996). “Some Useful Compound Dispersion Experiments in Quality Design”. Technometrics 38, pp. 354–364.
   Web of Science ®Google Scholar
• Rosenberger, J. and Kalish, L. (1978). “Optimal Designs for Estimation of Parameters of Logistic Function”. Biometrics 34, pp. 746–756.
   Web of Science ®Google Scholar
• Sacks, J.; Schiller, S. B.; and Welch, W. J. (1989). “Designs for Computer Experiments”. Technometrics 31, pp. 41–47.
   Web of Science ®Google Scholar
• Sacks, J.; Welch, W. J.; Mitchell, T. J.; and Wynn, H. P. (1989). “Design and Analysis of Computer Experiments” (with discussion). Statistical Science 4, pp. 409–435.
   Google Scholar
• Satterthwaite, F. E. (1959). “Random Balance Experimentation” (with Discussion). Technometrics 1, pp. 111–137.
   Google Scholar
• Schoen, E. D. (1999). “Designing Fractional Two-Level Experiments With Nested Error Structures”. Journal of Applied Statistics 26, pp. 495–508.
   Web of Science ®Google Scholar
• Schoen, E. D. and Wolff, K. (1997). “Design and Analysis of a Fractional 413125 Split-Plot Experiment”. Journal of Applied Statistics 24, pp. 409–419.
   Web of Science ®Google Scholar
• Shoemaker, A. C. and Tsui, K.-L. (1993). “Response Model Analysis for Robust Design Experiments”. Communications in Statistics—Series A 22, pp. 1037–1064.
   Web of Science ®Google Scholar
• Shoemaker, A. C; Tsui, K.-L.; and Wu, C. F. J. (1991). “Economical Experimentation Methods for Robust Design”. Technometrics 33, pp. 415–427.
   Web of Science ®Google Scholar
• Sitter, R. R. (1992). “Robust Designs for Binary Data”. Biometrics 48, pp. 1145–1155.
   Web of Science ®Google Scholar
• Sitter, R. R. and Torsney, B. (1995). “Optimal Designs for Binary Response Experiments with 2 Design Variables”. Statistica Sinica 5, pp. 405–419.
   Web of Science ®Google Scholar
• Sitter, R. R. and Wu, C. F. W. (1993). “Optimal Designs for Binary Response Experiments—Fieller, D, and A Criteria”. Scandinavian Journal of Statistics 20, pp. 329–341.
   Web of Science ®Google Scholar
• Spargo, C. A.; Haaland, P. D.; Jurgensen, S. R.; Shank, D. D.; and Walker, G. T. (1993). “Chemiluminescent Detection of Strand Displacement Amplified DNA From Species Comprising the Microbacterium Tuberculosis Complex”. Molecular and Cellular Probes 7, pp. 395–404.
   PubMed Web of Science ®Google Scholar
• Steinberg, D. M. and Bursztyn (1994). “Dispersion Effects in Robust-Design Experiments with Noise Factors”. Journal of Quality Technology 26, pp. 12–20.
   Web of Science ®Google Scholar
• Steinberg, D. M. and Bursztyn (1998). “Noise Factors, Dispersion Effects, and Robust Design”. Statistica Sinica 8, pp. 67–85.
   Web of Science ®Google Scholar
• Steiner, S. H. and Hamada, M. (1997). “Making Mixtures Robust to Noise and Mixing Measurement Errors”. Journal of Quality Technology 29, pp. 441–450.
   Web of Science ®Google Scholar
• Taguchi, G. (1987). System of Experimental Design: Engineering Methods to Optimize Quality and Minimize Cost. Quality Resources, White Plains, NJ.
   Google Scholar
• Taguchi, G. (1991). Introduction to Quality Engineering. UNIPUB/Kraus International, White Plains, New York (Originally published by the Asian Productivity Organization).
   Google Scholar
• Taguchi, G. and Wu, Y. (1985). Introduction to Off-Line Quality Control. Central Japan Quality Control Association (available from American Supplier Institute, Dearborn, MI).
   Google Scholar
• Trinca, L. A. and Gilmour, S. G. (1998). “Variance Dispersion Graphs for Comparing Blocked Response Surface Designs”. Journal of Quality Technology 30, pp. 314–327.
   Web of Science ®Google Scholar
• Trinca, L. A. and Gilmour, S. G. (2001). “Multistratum Response Surface Designs”. Technometrics 43, pp. 25–33.
   Web of Science ®Google Scholar
• Tsui, K.-L. (1996). “A Critical Look at Taguchi's Modelling Approach for Robust Design”. Journal of Applied Statistics 23, pp. 81–95.
   Web of Science ®Google Scholar
• Vining, G. G. (1993). “A Computer Program for Generating Variance Dispersion Graphs”. Journal of Quality Technology 25, pp. 45–58.
   Web of Science ®Google Scholar
• Vining, G. G. (1998). “A Compromise Approach to Multiresponse Optimization”. Journal of Quality Technology 30, pp. 309–313.
   Web of Science ®Google Scholar
• Vining, G. G. and Bohn, L. L. (1998). “Response Surfaces for the Mean and Variance Using a Nonparametric Approach”. Journal of Quality Technology 30, pp. 282–291.
   Web of Science ®Google Scholar
• Vining, G. G.; Cornell, J.; and Myers, R. H. (1993). “A Graphical Approach for Evaluating Mixture Designs”. Journal of the Royal Statistical Society Series C 42, pp. 127–138.
   Google Scholar
• Vining, G. G. and Myers, R. H. (1990). “Combining Taguchi and Response Surface Philosophies: A Dual Response Approach”. Journal of Quality Technology 22, pp. 38–45.
   Web of Science ®Google Scholar
• Vining, G. G. and Schaub, D. (1996). “Experimental Designs for Estimating Both Mean and Variance Functions”. Journal of Quality Technology 29, pp. 135–147.
   Web of Science ®Google Scholar
• Vuchkov, I. N. and Boyadjieva, L. N. (1992). “Quality Improvement Through Design of Experiments with Both Product Parameters and External Noise Factors” in Model Oriented Data Analysis edited by V. Fedorov, W. G. Muller, I. N. Vuchkov. Physica-Verlag, Heidelberg, pp. 195–212.
   Google Scholar
• Wang, J. C. and Wu, C. F. J. (1995). “A Hidden Projection Property of Plackett-Burman and Related Designs”. Statistica Sinica 5, pp. 235–250.
   Web of Science ®Google Scholar
• Welch, W. J. (1982). “Branch and Bound Search for Experimental Designs Based on D-Optimality and Other Criteria”. Technometrics 24, pp. 41–18.
   Web of Science ®Google Scholar
• Welch, W. J.; Buck, R. J.; Sacks, J.; Wynn, H. P.; Mitchell, T. J.; and Morris, M. D. (1992). “Screening, Predicting, and Computer Experiments”. Technometrics 34, pp. 15–25.
   Web of Science ®Google Scholar
• Welch, W. J.; Yu, T. K.; Kang, S. M.; and Sacks, J. (1990). “Computer Experiments for Quality Control by Parameter Design”. Journal of Quality Technology 22, pp. 15–22.
   Web of Science ®Google Scholar
• Westfall, P. H.; Young, S. S.; and Lin, D. K. J. (1998). “Forward Selection Error Control in the Analysis of Supersaturated Designs”. Statistica Sinica 8, pp. 101–117.
   Web of Science ®Google Scholar
• Wolfinger, R. D. and Tobias, R. D. (1998). “Joint Estimation of Location, Dispersion, and Random Effects in Robust Design”. Technometrics 40, pp. 62–71.
   Web of Science ®Google Scholar
• Wu, C. F. J. (1993). “Construction of Supersaturated Designs Through Partially Aliased Interactions”. Biometrika 80, pp. 661–369.
   Web of Science ®Google Scholar
• Wu, C. F. J. and Ding, Y. (1998). “Construction of Response Surface Designs for Qualitative and Quantitative Factors”. Journal of Statistical Planning Inference 71, pp. 331–348.
   Web of Science ®Google Scholar
• Yamada, S. and Lin, D. K. J. (1997). “Supersaturated Designs Including an Orthogonal Base”. Canadian Journal of Statistics 25, pp. 203–213.
   Web of Science ®Google Scholar
• Ying, L. A.; Pukelsheim, F.; and Draper, N. R. (1995a). “Slope Rotatability over all Directions Designs”. Journal of Applied Statistics 22, pp. 331–341.
   Web of Science ®Google Scholar
• Ying, L. A.; Pukelsheim, F.; and Draper, N. R. (1995b). “Slope Rotatability over all Directions Designs for k > 4”. Journal of Applied Statistics 22, pp. 343–354.
   Web of Science ®Google Scholar
• Zahran, A.; Anderson-Cook, C. M.; and Myers, R. H. (2003). “Fraction of Design Space to Assess Prediction Capability of Response Surface Designs”. Journal of Quality Technology 35, pp. 377–386.
   Web of Science ®Google Scholar
• Zhou, J. (2001). “A Robust Criterion for Experimental Designs for Serially Correlated Observations”. Technometrics 43, pp. 462–467.
   Web of Science ®Google Scholar