Another Look at the EWMA Control Chart with Estimated Parameters

References

• Albers, W. and Kallenberg, W. C. M. (2004). “Are Estimated Control Charts in Control?” Statistics 38 (1), pp. 67–79.
   Web of Science ®Google Scholar
• Aly, A. A.; Mahmoud, M. A.; and Woodall, W. H. (2015). “A Comparison of the Performance of Phase II Simple Linear Profile Control Charts when Parameters are Estimated”. Communications in Statistics–Simulation and Computation, to appear.
   Google Scholar
• Bajgier, S. M. (1992). “The Use of Bootstrapping to Construct Limits on Control Charts”. In Proceedings of the Decision Science Institute, pp. 1611–1613. San Diego, CA.
   Google Scholar
• Chakraborti, S.; Human, S. W.; and Graham, M. A. (2009). “Phase I Statistical Process Control Charts: An Overview and Some Results”. Quality Engineering 21 (1), pp. 52–62.
   Web of Science ®Google Scholar
• Chatterjee, S. and Qiu, P. (2009). “Distribution-Free Cumulative Sum Control Charts Using Bootstrap-Based Control Limits”. The Annals of Applied Statistics 3 (1), pp. 349–369.
   Web of Science ®Google Scholar
• Chen, G. (1997). “The Mean and Standard Deviation of the Run Length Distribution of X̄ Charts When Control Limits are Estimated”. Statistica Sinica 7 (3), pp. 789–798.
   Web of Science ®Google Scholar
• Crowder, S. V. (1987). “A Simple Method for Studying Run-Length Distributions of Exponentially Weighted Moving Average Charts”. Technometrics 29 (4), pp. 401–407.
   Web of Science ®Google Scholar
• Crowder, S. V. (1989). “Design of Exponentially Weighted Moving Average Schemes”. Journal of Quality Technology 21 (3), pp. 155–162.
   Web of Science ®Google Scholar
• Derman, C. and Ross, S. (1995). “An Improved Estimator of σ in Quality Control”. Probability in the Engineering and Informational Sciences 9 (3), pp. 411–415.
   Google Scholar
• Efron, B. (1979). “Bootstrap Methods: Another Look at the Jackknife”. The Annals of Statistics 7 (1), pp. 1–26.
   Web of Science ®Google Scholar
• Faraz, A.; Woodall, W. H.; and Heuchenne, C. (2015). “Guaranteed Conditional Performance of the S2 Control Chart with Estimated Parameters”. International Journal of Production Research 53 (14), pp. 4405–4413.
   Web of Science ®Google Scholar
• Gandy, A. and Kval⊘y, J. T. (2013). “Guaranteed Conditional Performance of Control Charts via Bootstrap Methods”. Scandinavian Journal of Statistics 40, pp. 647–668.
   Web of Science ®Google Scholar
• Jensen, W. A.; Jones-Farmer, L. A.; Champ, C. W.; and Woodall, W. H. (2006). “Effects of Parameter Estimation on Control Chart Properties: A Literature Review”. Journal of Quality Technology 38 (4), pp. 349–364.
   Web of Science ®Google Scholar
• Jones, L. A. (2002). “The Statistical Design of EWMA Control Charts with Estimated Parameters”. Journal of Quality Technology 34 (3), pp. 277–288.
   Web of Science ®Google Scholar
• Jones, L. A.; Champ, C. W.; and Rigdon, S. E. (2001). “The Performance of Exponentially Weighted Moving Average Charts with Estimated Parameters”. Technometrics 43 (2), pp. 156–167.
   Web of Science ®Google Scholar
• Jones, L. A.; Champ, C. W.; and Rigdon, S. E. (2004). “The Run Length Distribution of the CUSUM with Estimated Parameters”. Journal of Quality Technology 36 (1), pp. 95–108.
   Web of Science ®Google Scholar
• Jones, L. A. and Woodall, W. H. (1998). “The Performance of Bootstrap Control Charts”. Journal of Quality Technology 30 (4), pp. 362–375.
   Web of Science ®Google Scholar
• Jones, M. A. and Steiner, S. H. (2012). “Assessing the Effect of Estimation Error on the Risk-Adjusted CUSUM Chart Performance”. International Journal for Quality in Health Care 24 (2), pp. 176–181.
   PubMed Web of Science ®Google Scholar
• Jones-Farmer, L. A.; Woodall, W. H.; Steiner, S. H.; and Champ, C. W. (2014). “An Overview of Phase I Analysis for Process Improvement and Monitoring”. Journal of Quality Technology 46 (3), pp. 265–280.
   Web of Science ®Google Scholar
• Lee, J.; Wang, N.; Xu, L.; Schuh, A.; and Woodall, W. H. (2013). “The Effect of Parameter Estimation on Upper-Sided Bernoulli Cumulative Sum Charts”. Quality and Reliability Engineering International 29 (5), pp. 639–651.
   Web of Science ®Google Scholar
• Liu, R. Y. and Tang, J. (1996). “Control Charts for Dependent and Independent Measurements Based on the Bootstrap”. Journal of the American Statistical Association 91 (436), pp. 1694–1700.
   Web of Science ®Google Scholar
• Lucas, J. M. and Saccucci, M. S. (1990). “Exponentially Moving Average Control Schemes: Properties and Enhancements”. Technometrics 32 (1), pp. 1–12.
   Web of Science ®Google Scholar
• Mahmoud, M. A.; Henderson, G. R.; Epprecht, E. K.; and Woodall, W. H. (2010). “Estimating the Standard Deviation in Quality Control Applications”. Journal of Quality Technology 42 (4), pp. 348–357.
   Web of Science ®Google Scholar
• Montgomery, D. C. (2013). Introduction to Statistical Quality Control, 7th Edition. Hoboken, NJ: John Wiley & Sons, Inc.
   Google Scholar
• Psarakis, S.; Vyniou, A. K.; and Castagliola, P. (2014). “Some Recent Developments on the Effects of Parameter Estimation on Control Charts”. Quality and Reliability Engineering International 30 (8), pp. 1113–1129.
   Web of Science ®Google Scholar
• Quesenberry, C. P. (1993). “The Effect of Sample Size on Estimated Limits for X̄ and X Control Charts”. Journal of Quality Technology 25 (4), pp. 237–247.
   Web of Science ®Google Scholar
• Roberts, S. W. (1959). “Control Chart Tests Based on Geometric Moving Averages”. Technometrics 1 (3), pp. 239–250.
   Google Scholar
• Robinson, P. B. and Ho, T. Y. (1978). “Average Run Lengths of Geometric Moving Average Charts by Numerical Methods”. Technometrics 20 (1), pp. 85–93.
   Web of Science ®Google Scholar
• Saleh, N. A.; Mahmoud, M. A.; and Abdel-Salam, A.-S. G. (2013). “The Performance of the Adaptive Exponentially Weighted Moving Average Control Chart with Estimated Parameters”. Quality and Reliability Engineering International 29 (4), pp. 595–606.
   Web of Science ®Google Scholar
• Saleh, N. A.; Mahmoud, M. A.; Keefe, M. J.; and Woodall, W. H. (2015). “The Difficulty in Designing Shewhart and X Control Charts with Estimated Parameters”. Journal of Quality Technology 47 (2), pp. 127–138.
   Web of Science ®Google Scholar
• Seppala, T.; Moskowitz, H.; Plante, R.; and Tang, J. (1995). “Statistical Process Control via the Subgroup Bootstrap”. Journal of Quality Technology 27 (2), pp. 139–153.
   Web of Science ®Google Scholar
• Simöes, B. F. T.; Epprecht, E. K.; and Costa, A. F. B. (2010). “Performance Comparisons of EWMA Control Chart Schemes”. Quality Technology and Quantitative Management 7 (3), pp. 249–261.
   Web of Science ®Google Scholar
• Steiner, S. H. (1999). “EWMA Control Charts with Time-Varying Control Limits and Fast Initial Response”. Journal of Quality Technology 31 (1), pp. 75–86.
   Web of Science ®Google Scholar
• Vardeman, S. B. (1999). “A Brief Tutorial on the Estimation of the Process Standard Deviation”. IIE Transactions 31 (6), pp. 503–507.
   Web of Science ®Google Scholar
• Woodall, W. H. and Thomas, E. V. (1995). “Statistical Process Control with Several Components of Common Cause Variability”. IIE Transactions 27 (6), pp. 757–764.
   Web of Science ®Google Scholar
• Zhang, M.; Megahed, F. M.; and Woodall, W. H. (2014). “Exponential CUSUM Charts with Estimated Control Limits”. Quality and Reliability Engineering International 30, pp. 275–286.
   Web of Science ®Google Scholar
• Zhang, M.; Peng, Y.; Schuh, A.; Megahed, F. M.; and Woodall, W. H. (2013). “Geometric Charts with Estimated Control Limits”. Quality and Reliability Engineering International 29 (2), pp. 209–223.
   Web of Science ®Google Scholar
• Zwetsloot, I. M.; Schoonhoven, M.; and Does, R. J. M. M. (2014). “A Robust Estimator for Location in Phase I Based on an EWMA Chart”. Journal of Quality Technology 46 (4), pp. 302–316.
   Web of Science ®Google Scholar
• Zwetsloot, I. M.; Schoonhoven, M.; and Does, R. J. M. M. (2015). “A Robust Phase I Exponentially Weighted Moving Average Chart for Dispersion”. Quality and Reliability Engineering International. DOI: 10.1002/qre.1655
   Google Scholar