References
- Abellan-Nebot, J. V., J. Liu, F. R. Subiron, and J. Shi. 2012. State space modeling of variation propagation in multistation machining processes considering machining-induced variations. Journal of Manufacturing Science and Engineering 134 (2):021002. doi: https://doi.org/10.1115/1.4005790.
- Apley, D. W., and J. Zhu. 2020. Visualizing the effects of predictor variables in black box supervised learning models. Journal of the Royal Statistical Society: Series B (Statistical Methodology) 82 (4):1059–1086.
- Apley, D., and J. Shi. 1998. Diagnosis of multiple fixture faults in panel assembly. Journal of Manufacturing Science and Engineering 120 (4):793–801. doi: https://doi.org/10.1115/1.2830222.
- Bak Ir, B., İ. Batmaz, F. Güntürkün, İ. İpekçi, G. Köksal, and N. Özdemirel. 2006. Defect cause modeling with decision tree and regression analysis. World Academy of Science, Engineering and Technology 24:1–4.
- Bottou, L. 2010. Large-scale machine learning with stochastic gradient descent. In Proceedings of COMPSTAT’2010, 177–86. Heidelberg, Germany: Springer.
- Caruana, R. 1997. Multitask learning. Machine Learning 28 (1):41–75. doi: https://doi.org/10.1023/A:1007379606734.
- Ceglarek, D., and J. Shi. 1996. Fixture failure diagnosis for autobody assembly using pattern recognition. Journal of Engineering for Industry 118 (1):55–66. doi: https://doi.org/10.1115/1.2803648.
- Chang, D. S., and S.-T. Jiang. 2002. Assessing quality performance based on the on-line sensor measurements using neural networks. Computers & Industrial Engineering 42 (2–4):417–24. doi: https://doi.org/10.1016/S0360-8352(02)00035-9.
- Correa, M., C. Bielza, M. d J. Ramirez, and J. R. Alique. 2008. A Bayesian network model for surface roughness prediction in the machining process. International Journal of Systems Science 39 (12):1181–92. doi: https://doi.org/10.1080/00207720802344683.
- Ding, Y., J. Jin, D. Ceglarek, and J. Shi. 2005. Process-oriented tolerancing for multi-station assembly systems. IIE Transactions 37 (6):493–508. doi: https://doi.org/10.1080/07408170490507774.
- Friedman, N., D. Geiger, and M. Goldszmidt. 1997. Bayesian network classifiers. Machine Learning 29 (2/3):131–63. doi: https://doi.org/10.1023/A:1007465528199.
- Graves, A., and J. Schmidhuber. 2009. Offline handwriting recognition with multidimensional recurrent neural networks. In Advances in Neural Information Processing Systems, 545–52, Vancouver, Canada. San Francisco: Morgan Kau.
- Graves, A., A-R Mohamed, and G. Hinton. 2013a. Speech recognition with deep recurrent neural networks. In IEEE International Conference on Acoustics, Speech and Signal Processing (ICASSP), 6645–6649. IEEE.
- Graves, A., A.-R. Mohamed, and G. Hinton. 2013b. Speech recognition with deep recurrent neural networks. 2013 IEEE International Conference on Acoustics, Speech and Signal Processing, 6645–6649. IEEE.
- Hao, L., L. Bian, N. Gebraeel, and J. Shi. 2017. Residual life prediction of multistage manufacturing processes with interaction between tool wear and product quality degradation. IEEE Transactions on Automation Science and Engineering 14 (2):1211–24. doi: https://doi.org/10.1109/TASE.2015.2513208.
- Huang, Q., S. Zhou, and J. Shi. 2002. Diagnosis of multi-operational machining processes through variation propagation analysis. Robotics and Computer-Integrated Manufacturing 18 (3–4):233–9. doi: https://doi.org/10.1016/S0736-5845(02)00014-5.
- Jemwa, G. T., and C. Aldrich. 2005. Improving process operations using support vector machines and decision trees. AIChE Journal 51 (2):526–43. doi: https://doi.org/10.1002/aic.10315.
- Jensen, F. V. 1996. An introduction to Bayesian networks, Vol. 210. London: UCL press.
- Jin, R., J. Li, and J. Shi. 2007. Quality prediction and control in rolling processes using logistic regression. Transactions of NAMRI/SME 35:113–20.
- Jin, J., and J. Shi. 1999. State space modeling of sheet metal assembly for dimensional control. Journal of Manufacturing Science and Engineering 121 (4):756–62. doi: https://doi.org/10.1115/1.2833137.
- Jin, R., and J. Shi. 2012. Reconfigured piecewise linear regression tree for multistage manufacturing process control. IIE Transactions 44 (4):249–61. doi: https://doi.org/10.1080/0740817X.2011.564603.
- Jin, M., and F. Tsung. 2009. A chart allocation strategy for multistage processes. IIE Transactions 41 (9):790–803. doi: https://doi.org/10.1080/07408170902789068.
- Joe Qin, S. 2003. Statistical process monitoring: basics and beyond. Journal of Chemometrics 17 (8–9):480–502. doi: https://doi.org/10.1002/cem.800.
- Kourti, T., J. Lee, and J. F. Macgregor. 1996. Experiences with industrial applications of projection methods for multivariate statistical process control. Computers & Chemical Engineering 20:S745–S750. doi: https://doi.org/10.1016/0098-1354(96)00132-9.
- Kuhn, M., and K. Johnson. 2013. Applied predictive modeling, Vol. 26. New York: Springer.
- Lawless, J., R. Mackay, and J. Robinson. 1999. Analysis of variation transmission in manufacturing processes–part I. Journal of Quality Technology 31 (2):131–42. doi: https://doi.org/10.1080/00224065.1999.11979910.
- LeCun, Y., B. E. Boser, J. S. Denker, D. Henderson, R. E. Howard, W. E. Hubbard, and L. D. Jackel. 1990. Handwritten digit recognition with a back-propagation network. In Advances in Neural Information Processing Systems, 396–404, Denver, CO. San Francisco, CA: Morgan Kaufmann.
- Li, Y., and F. Tsung. 2009. False discovery rate-adjusted charting schemes for multistage process monitoring and fault identification. Technometrics 51 (2):186–205. doi: https://doi.org/10.1198/TECH.2009.0019.
- Liu, K., and J. Shi. 2013. Objective-oriented optimal sensor allocation strategy for process monitoring and diagnosis by multivariate analysis in a Bayesian network. IIE Transactions 45 (6):630–43. doi: https://doi.org/10.1080/0740817X.2012.725505.
- Liu, J., J. Shi, and S. J. Hu. 2009. Quality-assured setup planning based on the stream-of-variation model for multi-stage machining processes. IIE Transactions 41 (4):323–34. doi: https://doi.org/10.1080/07408170802108526.
- Liu, K., X. Zhang, and J. Shi. 2014. Adaptive sensor allocation strategy for process monitoring and diagnosis in a bayesian network. IEEE Transactions on Automation Science and Engineering 11 (2):452–62. doi: https://doi.org/10.1109/TASE.2013.2287101.
- Lowry, C. A., and D. C. Montgomery. 1995. A review of multivariate control charts. IIE Transactions 27 (6):800–10. doi: https://doi.org/10.1080/07408179508936797.
- MacGregor, J. F., and T. Kourti. 1995. Statistical process control of multivariate processes. Control Engineering Practice 3 (3):403–14. doi: https://doi.org/10.1016/0967-0661(95)00014-L.
- Mateos, G., and G. B. Giannakis. 2012. Robust nonparametric regression via sparsity control with application to load curve data cleansing. IEEE Transactions on Signal Processing 60 (4):1571–84. doi: https://doi.org/10.1109/TSP.2011.2181837.
- Molnar, C. 2020. Interpretable Machine Learning. Morrisville, NC: Lulu Press.
- Obozinski, G., B. Taskar, and M. Jordan. 2006. Multi-task feature selection. Technical report, Department of Statistics, University of California, Berkeley.
- Paynabar, K., J. Jin, and M. Pacella. 2013. Monitoring and diagnosis of multichannel nonlinear profile variations using uncorrelated multilinear principal component analysis. IIE Transactions 45 (11):1235–47. doi: https://doi.org/10.1080/0740817X.2013.770187.
- Reckhow, K. H. 1999. Water quality prediction and probability network models. Canadian Journal of Fisheries and Aquatic Sciences 56 (7):1150–8. doi: https://doi.org/10.1139/f99-040.
- Shewhart, W. A. 1931. Economic control of quality of manufactured product. ASQ Quality Press.
- Shi, J. 2006. Stream of variation modeling and analysis for multistage manufacturing processes. Boca Raton, FL: CRC Press.
- Shiu, B., D. Ceglarek, and J. Shi. 1997. Flexible beam-based modeling of sheet metal assembly for dimensional control. In Transactions-North American Manufacturing Research Institution of SME, 24, 49–54.
- Skinner, K. R., D. C. Montgomery, G. C. Runger, J. W. Fowler, D. R. McCarville, T. R. Rhoads, and J. D. Stanley. 2002. Multivariate statistical methods for modeling and analysis of wafer probe test data. IEEE Transactions on Semiconductor Manufacturing 15 (4):523–30. doi: https://doi.org/10.1109/TSM.2002.804901.
- Tam, C., T. K. Tong, T. C. Lau, and K. Chan. 2004. Diagnosis of prestressed concrete pile defects using probabilistic neural networks. Engineering Structures 26 (8):1155–62. doi: https://doi.org/10.1016/j.engstruct.2004.03.018.
- Woodall, W. H. 2007. Current research on profile monitoring. Production 17 (3):420–5. doi: https://doi.org/10.1590/S0103-65132007000300002.
- Yan, H., K. Paynabar, and M. Pacella. 2019. Structured point cloud data analysis via regularized tensor regression for process modeling and optimization. Technometrics 61 (3):385–395.
- Yan, H., K. Paynabar, and J. Shi. 2015. Image-based process monitoring using low-rank tensor decomposition. IEEE Transactions on Automation Science and Engineering 12 (1):216–27. doi: https://doi.org/10.1109/TASE.2014.2327029.
- Yan, H., K. Paynabar, and J. Shi. 2017. Anomaly detection in images with smooth background via smooth-sparse decomposition. Technometrics 59 (1):102–14. doi: https://doi.org/10.1080/00401706.2015.1102764.
- Yu, J., and M. M. Rashid. 2013. A novel dynamic bayesian network-based networked process monitoring approach for fault detection, propagation identification, and root cause diagnosis. AIChE Journal 59 (7):2348–65. doi: https://doi.org/10.1002/aic.14013.
- Yuan, M., and Y. Lin. 2006. Model selection and estimation in regression with grouped variables. Journal of the Royal Statistical Society: Series B (Statistical Methodology) 68 (1):49–67. doi: https://doi.org/10.1111/j.1467-9868.2005.00532.x.
- Zhang, C., H. Yan, S. Lee, and J. Shi. 2020. Dynamic multivariate functional data modeling via sparse subspace learning. Technometrics, in press.
- Zhou, S., Y. Chen, and J. Shi. 2004. Statistical estimation and testing for variation root-cause identification of multistage manufacturing processes. IEEE Transactions on Automation Science and Engineering 1 (1):73–83. doi: https://doi.org/10.1109/TASE.2004.829427.
- Zhou, S., Q. Huang, and J. Shi. 2003. State space modeling of dimensional variation propagation in multistage machining process using differential motion vectors. IEEE Transactions on Robotics and Automation 19 (2):296–309.
- Zhou, Q., Z. Xiong, J. Zhang, and Y. Xu. 2006. Hierarchical neural network based product quality prediction of industrial ethylene pyrolysis process. In International Symposium on Neural Networks, 1132–1137. Springer.