Total Hemispherical Emissivity of SS 316L with Simulated Very High Temperature Reactor Surface Conditions

References

• “Note No. 8: ‘L’, ‘H’ and Standard Grades of Stainless Steel,” Atlas Steels (2011); http://www.atlassteels.com.au/site/pages/technical-library.php ( current as of Nov. 29, 2016).
   Google Scholar
• H. S. KHATAK and B. RAJ, Corrosion of Austenitic Stainless Steels: Mechanism, Mitigation and Monitoring, Woodhead Publishing Limited, Cambridge, United Kingdom (2002).
   Google Scholar
• B. RAJ, P. CHELLAPANDI, and P. R. VASUDEVA RAO, Sodium Fast Reactors with Closed Fuel Cycle, CRC Press, Boca Raton, Florida (2015).
   Google Scholar
• M. F. ASHBY and M. SMIDMAN, “Materials for Nuclear Power Systems,” Version 1.1, Granta Material Inspiration (Jan. 2010).
   Google Scholar
• L. LOMMERS and G. HONMA, “NGNP High Temperature Materials White Paper,” INL/EXT-09-17187, Rev. 1, Idaho National Laboratory (2012); https://doi.org/10.2172/1055953.
   Google Scholar
• G. O. HAYNER et al., “Next Generation Nuclear Plant Materials Research and Development Program Plan,” INEEL/EXT-04-02347, Rev. 1, Idaho National Engineering and Environmental Laboratory (2004); https://doi.org/10.2172/910957.
   Google Scholar
• C. H. OH, G. C. PARK, and C. DAVIS, “RCCS Experiments and Validation for High-Temperature Gas-Cooled Reactor,” Nucl. Technol., 167, 1, 107 (2009); https://doi.org/10.13182/NT09-A8855.
   Web of Science ®Google Scholar
• W. R. CORWIN et al., “Next Generation Nuclear Plant Phenomena Identification and Ranking Tables (PIRTs) Volume 4: High-Temperature Materials PIRTs,” ORNL/TM-2007/147, Oak Ridge National Laboratory (2008); https://doi.org/10.2172/1027385.
   Google Scholar
• E. SHABER et al., “Very High Temperature Reactor (VHTR) Survey of Materials Research and Development Needs to Support Early Deployment,” INEEL/EXT-03-00141, Idaho National Engineering and Environmental Laboratory (2003); https://doi.org/10.2172/910626.
   Google Scholar
• P. BILLOT and J.-L. SERAN, “Materials Requirements to Support Research for the Generation IV Systems Development (VHTR, GFR, SFR),” Proc. NATO Advanced Study Institute on Materials for Generation-IV Nuclear Reactors (MATGEN-IV), Cargese, France, September 24–October 6, 2007, IRAMIS; http://iramis.cea.fr/meetings/matgen4/References/GIVMaterial%20requirements.pdf ( current as of Nov. 29, 2016).
   Google Scholar
• G. J. VAN TUYLE et al., “Summary of Advanced LMR (Liquid Metal Reactor) Evaluations: PRISM (Power Reactor Inherently Safe Module) and SAFR (Sodium Advanced Fast Reactor),” NUREG/CR-5364, U.S. Nuclear Regulatory Commission (1989); https://doi.org/10.2172/5491968.
   Google Scholar
• M. BUCKNOR, D. GRABASKAS, and A. BRUNETT, “The Development of a Demonstration Passive System Reliability Assessment,” Proc. 12th Int. Conf. Probabilistic Safety Assessment and Management (PSAM), Honolulu, Hawaii, June 22–27, 2014, International Association for Probabilistic Safety Assessment and Management (2014); http://psam12.org/proceedings/tuesday.html ( current as of Nov. 29, 2016).
   Google Scholar
• J. R. HOWELL, R. SIEGEL, and M. P. MENGÜÇ, Thermal Radiation Heat Transfer, 5th ed., CRC Press, Boca Raton, Florida (2011).
   Google Scholar
• Y. S. TOULOUKIAN and D. P. DEWITT, “Thermal Radiative Properties, Metallic Elements and Alloys,” IFI/Plenum Data Corporation (1970).
   Google Scholar
• “Note No. 3: Stainless Steel—Properties & Equivalent Grades,” Atlas Steels (2012); http://www.atlassteels.com.au/site/pages/technical-library.php ( current as of Nov. 29, 2016).
   Google Scholar
• Y. ASASA et al., “Current Status of the Development of Advanced 316-Steel for FBR Structures,” Proc. 1992 Pressure Vessels and Piping Conf. Stress Classification, Robust Methods, and Elevated Temperature Design, New Orleans, Louisiana, June 21–25, 1992, Vol. PVP 230, p. 61, American Society of Mechanical Engineers ( 1992).
   Google Scholar
• “Standard Test Method for Total Hemispherical Emittance of Surfaces up to 1400°C,” ASTM C835-06, ASTM International (Dec. 2006); https://doi.org/10.1520/C0835-01R06.
   Google Scholar
• C. ISETTI, E. NANNEI, and C. PISONI, “The Effect of Oxidation and Roughness on the Total Normal Emittance of Stainless Steel,” High Temp.-High Press., 11, 4, 393 (1979).
   Google Scholar
• C. ISETTI and E. NANNEI, “Total Normal Emittance of Stainless Steel at High Temperatures: Influence of Oxide Layer Growth,” High Temp.-High Press., 12, 3, 307 (1980).
   Google Scholar
• C. ISETTI and E. NANNEI, “Influence of Surface Treatments on the Total Normal Emittance of AISI 316 Stainless Steel,” Wärme- Und Stoffübertragung, 14, 3, 211 (1980); https://doi.org/10.1007/BF01637703.
   Web of Science ®Google Scholar
• R. BARTOLINI, C. ISETTI, and E. NANNEI, “On the Effect of Annealing on Total Normal Emittance of Oxidized Steel,” Int. J. Heat Mass Transfer, 28, 1, 309 (1985); https://doi.org/10.1016/0017-9310(85)90033-X.
   Web of Science ®Google Scholar
• G. RUFFINO and C. PISONI, “An Apparatus for Emissivity Measurements,” High Temp.-High Press., 8, 4, 419 (1976).
   Google Scholar
• H. Y. NAM et al., “Experimental Study on the Emissivity of Stainless Steel,” Proc. Korean Nuclear Society 2001 Spring Mtg., Cheju, Korea, May 24–25, 2001, Korean Nuclear Society ( 2001).
   Google Scholar
• F. VALIORGUE et al., “Emissivity Calibration for Temperature Measurement Using Infrared Thermography in Orthogonal Cutting of 316L and 100Cr6 Grinding,” AIP Conf. Proc., 1315, 1053 (2011); https://doi.org/10.1063/1.3552319.
   Google Scholar
• F. VALIORGUE et al., “Emissivity Calibration for Temperatures Measurement Using Thermography in the Context of Machining,” Appl. Therm. Eng., 58, 1–2, 321, (2013); https://doi.org/10.1016/j.applthermaleng.2013.03.051.
   Web of Science ®Google Scholar
• P. G. BARNETT et al., “Emissivity Measurements of Liquid Sodium and Some Sodium Contaminated Steel Surfaces,” Proc. Int. Working Group on Fast Reactors Specialists’ Mtg. Heat and Mass Transfer in the Reactor Cover Gas, Harwell, United Kingdom, October 8–10, 1985, IWGFR-57, International Atomic Energy Agency, 5/1-1 ( 1986).
   Google Scholar
• N. HATTORI, A. FURUTANI, and O. FURUKAWA, “Emisisivity of Sodium Mist Deposited on a Stainless-Steel Plate,” Proc. Int. Working Group on Fast Reactors Specialists’ Mtg. Heat and Mass Transfer in the Reactor Cover Gas, Harwell, United Kingdom, October 8–10, 1985, IWGFR-57, International Atomic Energy Agency, 5/2-1 ( 1986).
   Google Scholar
• S. FRACHET, M. BOUTRAIS, and P. PRADEL, “Measurements of Emissivity: THEMIS Facility,” Proc. Int. Working Group on Fast Reactors Specialists’ Mtg. Heat and Mass Transfer in the Reactor Cover Gas, Harwell, United Kingdom, October 8–10, 1985, IWGFR-57, International Atomic Energy Agency, 5/3-1 ( 1986).
   Google Scholar
• R. K. MAYNARD et al., “Total Hemispherical Emissivity of Potential Structural Materials for Very High Temperature Reactor Systems: Hastelloy X,” Nucl. Technol., 172, 1, 88 (2010); https://doi.org/10.13182/NT10-6.
   Web of Science ®Google Scholar
• R. K. MAYNARD et al., “Hemispherical Total Emissivity of Potential Structural Materials for Very High Temperature Reactor Systems: Haynes 230,” Nucl. Technol., 179, 3, 429 (2012); https://doi.org/10.13182/NT11-5.
   Web of Science ®Google Scholar
• A. J. GORDON et al., “Hemispherical Total Emissivity of Hastelloy N with Different Surface Conditions,” J. Nucl. Mater., 426, 1–3, 85 (2012); https://doi.org/10.1016/j.jnucmat.2012.03.026.
   Web of Science ®Google Scholar
• ANSI/ASME Standard B46.1-1985, “Surface Texture (Surface Roughness, Waviness, and Lay),” American Society of Mechanical Engineers, New York (1985).
   Google Scholar
• B. P. KELLER et al., “Total Hemispherical Emissivity of Inconel 718,” Nucl. Eng. Des., 287, 11 (2015); https://doi.org/10.1016/j.nucengdes.2015.02.018.
   Google Scholar
• C. B. AZMEH et al., “Total Hemispherical Emissivity of Grade 91 Ferritic Alloy with Various Surface Conditions,” Nucl. Technol., 195, 1, 87 (2016); https://doi.org/10.13182/NT15-54.
   Web of Science ®Google Scholar
• G. NEUER and G. JAROMA-WEILAND, “Spectral and Total Emissivity of High-Temperature Materials,” Int. J. Thermophys., 19, 3, 917 (1998); https://doi.org/10.1023/A:1022607426413.
   Web of Science ®Google Scholar