References
- H. LEE et al., “Development Status of Monte Carlo Code at UNIST,” presented at the KNS 2016 Spring Mtg., Jeju, Korea, May 12–13, 2016.
- A. E. ISOTALO et al., “Comparison of Depletion Algorithms for Large Systems of Nuclides,” Ann. Nucl. Energy, 38, 2–3, 261 (2011); https://doi.org/10.1016/j.anucene.2010.10.019.
- M. RYU et al., “Solution of the BEAVRS Benchmark Using the nTRACER Direct Whole Core Calculation Code,” J. Nucl. Sci. Technol., 52, 7–8, 961 (2015); https://doi.org/10.1080/00223131.2015.1038664.
- J. YU et al., “Preliminary Coupling of the Thermal/Hydraulic Solvers in the Monte Carlo Code MCS for Practical LWR Analysis,” Ann. Nucl. Energy, 118, 317 (2018); https://doi.org/10.1016/j.anucene.2018.03.043.
- S. PALMTAG et al., “Coupled Neutronics and Thermal-Hydraulic Solution of a Full Core PWR Using VERA-CS,” presented at PHYSOR 2014—The Role of Reactor Physics Toward a Sustainable Future, Miyako, Kyoto, Japan, September 28–October 3, 2014.
- “Consortium for Advanced Simulation of Light Water Reactors,” CASL (2015); http://www.casl.gov/ (current as of May 30, 2019).
- R. K. SALKO et al., CTF Theory Manual, The Pennsylvania State University (2014).
- B. KOUCHUNAS et al., “Validation and Application of the 3D Neutron Transport MPACT Within CASL VERA-CS,” Oak Ridge National Laboratory (2015).
- K. CLARNO et al., “Incorporate MPACT into TIAMAT and Demonstrate Pellet-Clad Interaction (PCI) Calculations,” CASL-U-2015-0022-000, Consortium for Advanced Simulation of Light Water Reactors (2014).
- P. JEFFREY et al., “Comparison and Demonstration of Fully Coupled Multiphysics Simulations for Watts Bar Unit 1,” presented at the 2017 Water Reactor Fuel Performance Mtg., Jeju, Korea, September 10–14, 2017.
- O. W. HERMANN et al., “ORIGEN-S: SCALE System Module to Calculate Fuel Depletion, Actinide Transmutation, Fission Product Buildup and Decay, and Associated Radiation Source Terms,” in SCALE: A Modular Code System for Performing Standardized Computer Analyses for Licensing Evaluation, Vol. II, Sect. F7, NUREG/CR-0200, Rev 6 (1995).
- S. M. BOWMAN et al., “SCALE 6: Comprehensive Nuclear Safety Analysis Code System,” Nucl. Technol., 174, 2, 126 (2011); https://doi.org/10.13182/NT10-163.
- B. COLLINS et al., “Analysis of the BEAVRS Benchmark Using VERA-CS,” presented at the Joint Int. Conf. on Mathematics and Computation (M&C), Supercomputing in Nuclear Applications (SNA) and the Monte Carlo (MC) Method, Nashville, Tennessee April 19–23, 2015.
- S. LIU et al., “BEAVRS Full Core Burnup Calculation in Hot Full Power Condition by RMC Code,” Ann. Nucl. Energy, 101, 434 (2017); https://doi.org/10.1016/j.anucene.2016.11.033.
- K. WANG et al., “Analysis of BEAVRS Two-Cycle Benchmark Using RMC Based on Full Core Detailed Model,” Prog. Nucl. Energy, 98, 301 (2017); https://doi.org/10.1016/j.pnucene.2017.04.009.
- M. DAEUBLER et al., “High-Fidelity Coupled Monte Carlo Neutron Transport and Thermal-Hydraulic Simulations Using Serpent 2/SUBCHANFLOW,” Ann. Nucl. Energy, 83, 352 (2015); https://doi.org/10.1016/j.anucene.2015.03.040.
- J. YU et al., “Preliminary Validation of MCS Multi-Physics Coupling Capability with CTF,” Proc. Reactor Physics Asia 2017 (RPHA17) Conf., Chengdu, China, August 24–25, 2017.
- H. LEE et al., “Preliminary Simulation Results of BEAVRS Three-Dimensional Cycle 1 Wholecore Depletion by UNIST Monte Carlo Code MCS,” presented at the M&C 2017 Int. Conf. Mathematics & Computational Methods Applied to Nuclear Science & Engineering, Jeju, Korea, April 16–20, 2017.
- N. HORELIK et al., “Benchmark for Evaluation and Validation of Reactor Simulations (BEAVRS), Vo1. 0.1,” Proc. Int. Conf. Mathematics and Computational Methods Applied to Nuclear Science & Engineering, Sun Valley, Idaho, May 5–9, 2013.
- N. HORELIK et al., MIT Benchmark for Evaluation and Validation of Reactor Simulations (BEAVRS), Release Rev. 2.0.2, MIT Computational Reactor Physics Group, Massachusetts Institute of Technology (2018).
- J. YU et al., “MCS Based Neutronics/Thermal-Hydraulics/Fuel-Performance Coupling with CTF and FRAPCON,” Comput. Phys. Commun., 238, 1 (2019); https://doi.org/10.1016/j.cpc.2019.01.001.
- J. YU et al., “Performance of On-The-fly Cross Sections Processing in Monte Carlo Simulation Code,” presented at the 37th Annual Conf. Canadian Nuclear Society and 41st Annual CNS/CNA Student Conf., Niagara Falls, Ontario, Canada, June 4–7, 2017.
- R. SALKO and M. AVRAMOVA, CTF Pre-Processor User’s Manual, Reactor Dynamics and Fuel Management Group, Pennsylvania State University, (2014).