References
- N. WOOLSTENHULME et al., “Development of Irradiation Test Devices for Transient Testing,” Nucl. Technol., 205, 10, 1251 (2019); https://doi.org/10.1080/00295450.2019.1590072.
- T. HOLSCHUH et al., “Transient Reactor Test Facility Advanced Transient Shapes,” Nucl. Technol., 205, 10, 1346 (2019); https://doi.org/10.1080/00295450.2018.1559712.
- C. L. POPE et al., “Transient Reactor (TREAT) Facility Design and Experiment Capability,” Nucl. Technol., 205, 10, 1378 (2019); https://doi.org/10.1080/00295450.2019.1599615.
- B. HEATH and C. RACE, “TREAT Restart Project,” Nucl. Technol., 205, 10, 1369 (2019); https://doi.org/10.1080/00295450.2019.1589853.
- C. B. JENSEN and A. D. FLEMING, “Development of Advanced Instrumentation for Transient Testing,” Nucl. Technol., 205, 10, 1354 (2019); https://doi.org/10.1080/00295450.2019.1627123.
- D. M. GERSTNER et al., “Safety Strategy and Update of the TREAT Facility Safety Basis,” Nucl. Technol., 205, 10, 1266 (2019); https://doi.org/10.1080/00295450.2018.1556993.
- “Transient Reactor Test Facility (TREAT) Final Safety Analysis Report,” SAR-420, Idaho National Laboratory (2018).
- D. R. MacFARLENE, G. A. FREUND, and J. F. BOLAND, “Hazards Summary Report on the Transient Reactor Test Facility (TREAT),” ANL-5923, Argonne National Laboratory Reactor Engineering Division (1958).
- S. R. JENSEN et al., “Restart of the Transient Reactor Test (TREAT) Facility Neutron Radiography Program,” Nucl. Technol., 205, 10, 1325 (2019); https://doi.org/10.1080/00295450.2019.1605780.
- C. H. BEAN, F. D. McCUAIG, and J. H. HANDWERK, “The Fabrication of the Fuel Elements for the Transient Reactor Test,” ANL-FGF-162, Argonne National Laboratory (1959).
- J. H. HANDWERK and R. C. LIED, “The Manufacture of the Graphite-Urania Fuel Matrix for TREAT,” ANL-5963, Argonne National Laboratory (1960).
- G. A. FREUND et al., “Design Summary Report on the Transient Reactor Test Facility (TREAT),” ANL-6034, Argonne National Laboratory, Reactor Engineering Division (1960).
- J. D. BESS and M. D. DEHART, “Baseline Assessment of TREAT for Modeling and Analysis Needs,” INL/EXT-15-35372, Idaho National Laboratory (2015).
- D. L. HETRICK, “The Effect of Fuel Particle Size on the Transient Behavior of a Homogenous Graphite Reactor,” NAA-SR-210, Atomic Energy Commission, Atomic Energy Research Department (1952).
- S. SCHUNERT et al., “Heat Source Characterization in a TREAT Fuel Particle Using Coupled Neutronics Binary Collision Monte-Carlo Calculations,” INL/CON-16-40179, Idaho National Laboratory (2016).
- A. ZABRISKIE et al., “A Coupled Multiscale Approach to TREAT LEU Feedback Modeling Using a Binary-Collision Monte-Carlo-Informed Heat Source,” Nucl. Sci. Eng., 193, 4, 368 (2019); https://doi.org/10.1080/00295639.2018.1528802.
- “Zircaloy-3 (Corrosion and Heat Resistant Alloy),” Eng. Alloys Dig., ASM International (1969).
- J. B. AINSCOUGH, “Gap Conductance in Zircaloy-Clad LWR Fuel Rods,” CSNI Report No. 72, Nuclear Energy Agency, Organization for Economic Co-operation and Development (1982).
- “ASM Handbook,” Volume 2B Properties and Selection of Aluminum Alloys, pp. 394–397, ASM International (2019).
- “Properties of Wrought Aluminum and Aluminum Alloys,” ASM Handbook: Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, Vol. 2, pp. 62–122, ASM International (1990).
- “Emissivity Values for Common Materials,” Infrared Services Inc, (Feb. 15, 2014); www.infrared-thermography.com/material-html (current as of Dec. 16, 2019).
- D. OKRENT et al., “The Reactor Kinetics of the Transient Reactor Test Facility (TREAT),” ANL-6174, Argonne National Laboratory (1960).
- A. T. BUTLAND and R. J. MADDISON, “The Specific Heat of Graphite: An Evaluation of Measurements,” J. Nucl. Mater., 49, 1, 45 (1973/74); https://doi.org/10.1016/0022-3115(73)90060-3.
- D. F. SCHOEBERLE, “A Study of the Enthalpy and Specific Heat Data for TREAT Core Graphite,” Argonne National Laboratory (1959).
- D. WILLCOX and J. PARRY, “Transient Reactor Test (TREAT) Facility Restart Heat Balance Calibration and Rod Worth Measurements,” Nucl. Technol., 205, 10, 1302 (2019); https://doi.org/10.1080/00295450.2019.1590075.
- F. L. HOOPER, “Derivation of the Power Equation Used for Heat Balance,” Argonne National Laboratory (1980).
- “TREAT Heat Balance Data Sheet (Z0003-0071-OP-04),” Argonne National Laboratory (1989).
- C. E. DICKERMAN et al., “Kinetics of TREAT Used as a Test Reactor,” ANL-6458, Argonne National Laboratory (1962).
- F. KIRN et al., “Reactor Physics Measurements in TREAT,” ANL-6173, Argonne National Laboratory (1960).
- J. HILSENRATH, “Tables of Thermal Properties of Gases,” Circular 564, National Bureau of Standards (1955).
- R. IVANY, “Treat Experimental Heat Transfer,” Argonne National Laboratory, Reactor Engineering Division (1959).
- H. M. CONNAWAY et al., “Analysis of the TREAT LEU Conceptual Design,” ANL/RTR/TM-16/1, Argonne National Laboratory (2016).
- D. PAPADIAS and A. E. WRIGHT, “Thermal Analysis of a TREAT Fuel Assembly,” ANL/GTRI/TM-14/14, Argonne National Laboratory (2014).
- B. K. HEATH, “Parametric Thermal Models of the Transient Reactor Test Facility (TREAT),” INL/EXT-14-31449, Idaho National Laboratory (2014).
- W. G. KNAPP, “Peak TREAT Core Temperatures as a Function of Reactor Energy,” Argonne National Laboratory (1977).