References
- N. I. TAK et al., “Development of a Core Thermo-Fluid Analysis Code for Prismatic Gas-Cooled Reactor,” Nucl. Eng. Technol., 46, 641 (2014); https://doi.org/10.5516/NET.02.2014.020.
- J. R. WOLF, T. E. CONDER, and R. R. SCHULTZ, “Particle Image Velocity Measurements and Analysis of Bypass Data for a Scaled 6 Mm Gap,” INL/EXT-12-26934, Idaho National Laboratory (2012).
- H. WANG, Y. A. HASSAN, and E. DOMINGUEZ-ONTIVEROS, “Experimental Study of Core Bypass Flow in a Prismatic VHTR Based on a Two-Layer Block Model,” Nucl. Eng. Des., 306, 98 (2016); https://doi.org/10.1016/j.nucengdes.2015.09.025.
- H. R. GROEHN, “Estimate of Cross Flow in High Temperature Gas-Cooled Reactor Fuel Blocks,” Nucl. Technol., 56, 392 (1982); https://doi.org/10.13182/NT82-A32866.
- H. KABURAKI and T. TAKIZUKA, “Crossflow Characteristics of HTGR Fuel Blocks,” Nucl. Eng. Des., 120, 425 (1990); https://doi.org/10.1016/0029-5493(90)90392-B.
- J. H. LEE et al., “Experimental Investigation and CFD Analysis on Cross Flow in the Core of PMR200,” Ann. Nucl. Energy, 83, 422 (2015); https://doi.org/10.1016/j.anucene.2015.04.002.
- S. J. YOON et al., “Study on the Flow Distribution in Prismatic VHTR Core with a Multi-Block Experiment and CFD Analysis,” Nucl. Eng. Des., 241, 12, 5174 (2011); https://doi.org/10.1016/j.nucengdes.2011.09.008.
- S. J. YOON et al., “The Effects of Crossflow Gap and Axial Bypass Gap Distribution on the Flow Characteristics in Prismatic VHTR Core,” Nucl. Eng. Des., 250, 465 (2012); https://doi.org/10.1016/j.nucengdes.2012.04.025.
- S. J. YOON et al., “Numerical and Experimental Investigation on Labyrinth Seal Mechanism for Bypass Flow Reduction in Prismatic VHTR Core,” Nucl. Eng. Des., 262, 525 (2013); https://doi.org/10.1016/j.nucengdes.2013.05.028.
- W. KANJANAKIJKASEM et al., “Experimental and CFD Studies of the Bypass Flow in a Prismatic Core of VHTR Using a Small-Scale Model,” Prog. Nucl. Energy, 91, 223 (2016); https://doi.org/10.1016/j.pnucene.2016.05.002.
- Y. INAGAKI et al., “R&D on Thermal Hydraulics of Core and Core-Bottom Structure,” Nucl. Eng. Des., 233, 173 (2004); https://doi.org/10.1016/j.nucengdes.2004.08.007.
- B. H. CHO, J. K. SONG, and C. K. CHO, “The Preliminary Core Thermal-Fluid Analysis of 350MWth VHTR,” KAERI/TR-6306/2016, Korea Atomic Energy Research Institute (2016).
- C. S. KIM et al., “High Temperature Operational Experiences of Helium Experimental Loop,” Transactions of Korean Nuclear Society Spring Mtg., Jeju, Korea, May 7–8, 2015.
- T. MARUYAMA and M. HARAYAMA, “Neutron Irradiation Effect on the Thermal Conductivity and Dimensional Change of Graphite Materials,” J. Nucl. Mater., 195, 1–2, 44 (1992); https://doi.org/10.1016/0022-3115(92)90362-O.
- N. E. TODREAS and M. S. KAZIMI, Nuclear System I: Thermal Hydraulic Fundamentals, Taylor and Francis, Levittown, Pennsylvania (1993).
- I. E. IDELCHIK and M. O. STEINBERG, Handbook of Hydraulic Resistance, Begell House, New York (1996).
- D. M. McELIGOT et al., “Investigation of Fundamental Thermal-Hydraulic Phenomena in Advanced Gas-Cooled Reactors,” INL/EXT-06-11801, MIT-GFR-042, Idaho National Laboratory (2006).
- M. H. KIM and H. S. LIM, “Evaluation of the Influence of Bypass Flow Gap Distribution on the Core Hot Spot in a Prismatic VHTR Core,” Nucl. Eng. Des., 241, 8, 3076 (2011); https://doi.org/10.1016/j.nucengdes.2011.05.009.