References
- S. GHOSH, D. MUKHOPADHYAY, and S. K. SAHA, “An Experimental Analysis of Subcooled Leakage Flow Through Slits from High Pressure High Temperature Pipelines,” Int. J. Press. Vessel. Pip., 88, 8–9, 281 (2011); https://doi.org/10.1016/j.ijpvp.2011.05.008.
- D. L. RUDLAND, G. WILKOWSKI, and P. SCOTT, “Effects of Crack Morphology Parameters on Leak-Rate Calculations in LBB Evaluations,” Int. J. Press. Vessels. Pip., 79, 2, 99 (2002); https://doi.org/10.1016/S0308-0161(01)00138-7.
- B. GHOSH et al., “Leak Rates Through Cracks and Slits in PHT Pipes for LBB,” Nucl. Eng. Des., 212, 1–3, 85 (2002); https://doi.org/10.1016/S0029-5493(01)00486-1.
- P. DOWNAR-ZAPOLSKI et al., “The Non-Equilibrium Relaxation Model for One-Dimensional Flashing Liquid Flow,” Int. J. Multiphase Flow, 22, 3, 473 (1996); https://doi.org/10.1016/0301-9322(95)00078-X.
- S. YIN et al., “Mass Transfer Characteristics of Pipeline Leak-Before-Break in a Nuclear Power Station,” Appl. Therm. Eng., 142, 194 (2018); https://doi.org/10.1016/j.applthermaleng.2018.06.077.
- Z. BILICKI and J. KESTIN, “Two-Phase Flow in a Vertical Pipe and the Phenomenon of Choking: Homogeneous Diffusion Model-I. Homogeneous Flow Models,” Int. J. Multiphase Flow, 9, 3, 269 (1983); https://doi.org/10.1016/0301-9322(83)90106-4.
- H. J. RICHTER, “Separated Two-Phase Flow Model: Application to Critical Two-Phase Flow,” Int. J. Multiphase Flow, 9, 5, 511 (1983); https://doi.org/10.1016/0301-9322(83)90015-0.
- G. B. WALLIS, “Critical Two-Phase Flow,” Int. J. Multiphase Flow, 6, 1–2, 97 (1980); https://doi.org/10.1016/0301-9322(80)90041-5.
- R. E. HENRY, H. K. FAUSKE, and S. T. McCOMAS, “Two-Phase Critical Flow at Low Qualities Part I: Experimental,” Nucl. Sci. Eng., 41, 1, 79 (1970); https://doi.org/10.13182/NSE70-A20366.
- E. ELIAS and G. S. LELLOUCHE, “Two-Phase Critical Flow,” Int. J. Multiphase Flow, 20, 1, 91 (1994); https://doi.org/10.1016/0301-9322(94)90071-X.
- R. E. HENRY, “A Study of One- and Two-component Two-Phase Critical Flows at Low Qualities,” University of Notre Dame (1967).
- F. J. MOODY, “Maximum Flow Rate of a Single Component, Two-Phase Mixture,” J. Heat Transfer, 87, 1, 134 (1965); https://doi.org/10.1115/1.3689029.
- R. E. HENRY and H. K. FAUSKE, “The Two-Phase Critical Flow of One-Component Mixtures in Nozzles, Orifices, and Short Tubes,” J. Heat Transfer, 93, 2, 179 (1971); https://doi.org/10.1115/1.3449782.
- J. J. SCHRODER, N. VUXUAN, and M. SURVEY, “Homogeneous Non-Equilibrium Two-Phase Critical Flow Model,” Chem. Eng. Technol., 10, 420 (1987); https://doi.org/10.1002/ceat.270100152.
- M. ALAMGIR, C. Y. KAN, and J. H. LIENHARD, “An Experimental Study of the Rapid Depressurization of Hot Water,” J. Heat Transfer, 102, 3, 433 (1980); https://doi.org/10.1115/1.3244318.
- D. ABDOLLAHIAN and B. CHEXAL, “Calculation of Leak Rates Through Cracks in Pipes and Tubes,” EPRI-NP-3395, Levy, Inc., Campbell, California (1983).
- C. AMOS and V. SCHROCK, “Critical Discharge of Initially Subcooled Water Through Slits,” University of California Berkeley, California (1983).
- C. N. AMOS and V. E. SCHROCK, “Two-Phase Critical Flow in Slits,” Nucl. Sci. Eng., 88, 3, 261 (1984); https://doi.org/10.13182/NSE84-A18581.
- H. J. YOON, M. ISHII, and S. T. REVANKAR, “Choking Flow Modeling with Mechanical and Thermal Non-Equilibrium,” Int. J. Heat Mass Transfer, 49, 1–2, 171 (2006); https://doi.org/10.1016/j.ijheatmasstransfer.2005.07.044.
- M. WANG et al., “Research on the Leak-Rate Characteristics of Leak-Before-Break (LBB) in Pressurized Water Reactor (PWR),” Appl. Therm. Eng., 62, 1, 133 (2014); https://doi.org/10.1016/j.applthermaleng.2013.08.046.
- S. YIN, N. WANG, and H. WANG, “Nucleation and Flashing Inception in Flashing Flows: A Review and Model Comparison,” Int. J. Heat Mass Transfer, 146 (2020); https://doi.org/10.1016/j.ijheatmasstransfer.2019.118898.
- S. Y. LEE and V. E. SCHROCK, “Critical Two-Phase Flow in Pipes for Subcooled Stagnation States with a Cavity Flooding Incipient Flashing Model,” J. Heat Transfer, 112, 4, 1031 (Nov. 1990); https://doi.org/10.1115/1.2910475.