References
- “Facility Safety,” DOE O 420.1C, U.S. Department of Energy, Washington, D.C. (2015).
- Code of Federal Regulations, Title 10, “Energy,” Part 70, “Domestic Licensing of Special Nuclear Material,” U.S. Nuclear Regulatory Commission (2017).
- Code of Federal Regulations, Title 10, “Energy,” Part 71, “Packaging and Transportation of Radioactive Material,” U.S. Nuclear Regulatory Commission (2017).
- “TRUPACT-II Safety Analysis Report,” Washington TRU Solutions (2004).
- C. V. PARKS et al., “Development of Technical Basis for Burnup Credit Regulatory Guidance in the United States,” Oak Ridge National Laboratory (2011).
- J. M. SCAGLIONE, D. E. MUELLER, and J. C. WAGNER, “An Approach for Validating Actinide and Fission Product Burnup Credit Criticality Safety Analyses: Criticality (keff) Predictions,” Nucl. Technol., 188, 3, 266 (2014); https://doi.org/10.13182/NT13-151.
- J. B. CLARITY et al., “As-Loaded Criticality Margin Assessment of Dual-Purpose Canisters Using UNF-ST&DARDS,” Nucl. Technol., 199, 3, 245 (2017); https://doi.org/10.1080/00295450.2017.1361250.
- C. J. PARK et al., “End Effect Analysis with Various Axial Burnup Distributions in High Density Spent Fuel Storage Racks,” Ann. Nucl. Energy, 81, 174 (2015); https://doi.org/10.1016/j.anucene.2015.01.042.
- I. C. GAULD and U. MERTYUREK, “Validation of BWR Spent Nuclear Fuel Isotopic Predictions with Applications to Burnup Credit,” Nucl. Eng. Des., 345, 110 (2019); https://doi.org/10.1016/j.nucengdes.2019.01.026.
- S. WU, D. CHAO, and J. LIANG, “Influence of Simultaneous Variations in Operating Parameters on Burnup Credit Criticality Analysis for PWR Spent Fuel Assemblies,” Nucl. Eng. Des., 340, 193 (2018); https://doi.org/10.1016/j.nucengdes.2018.09.035.
- G. RADULESCU et al., “Approach for Validating Actinide and Fission Product Compositions for Burnup Credit Criticality Safety Analyses,” Nucl. Technol., 188, 2, 154 (2014); https://doi.org/10.13182/NT13-154.
- “Spheroid,” Wikipedia; https://en.wikipedia.org/wiki/Spheroid ( current as of Oct. 27, 2018).
- “Transuranic Waste Acceptance Criteria for the Waste Isolation Pilot Plant,” Rev. 8, DOE/WIPP-02-3122, U.S. Department of Energy, Carlsbad Field Office (2016).
- K. BANERJEE et al., “Estimation of Inherent Safety Margins in Loaded Commercial Spent Nuclear Fuel Casks,” Nucl. Technol., 195, 2, 124 (2016); https://doi.org/10.13182/NT15-112.