References
- J. SERP et al., “The Molten Salt Reactor (MSR) in Generation IV: Overview and Perspectives,” Prog. Nucl. Energy, 77, 308 (2014); https://doi.org/10.1016/j.pnucene.2014.02.014.
- S. GUO et al., “Corrosion in the Molten Fluoride and Chloride Salts and Materials Development for Nuclear Applications,” Prog. Mater. Sci., 97, 448 (2018); https://doi.org/10.1016/j.pmatsci.2018.05.003.
- R. WRIGHT and T. SHAM, Status of Metallic Structural Materials for Molten Salt Reactors, Idaho National Laboratory (2018).
- S. D. CRAMER et al., ASM Handbook, Vol. 13A, ASM international, Materials Park, Ohio (2003).
- L. OLSON et al., “Intergranular Corrosion of High Temperature Alloys in Molten Fluoride Salts,” Mater. High Temp., 27, 2, 145 (2010); https://doi.org/10.3184/096034010X12743509428336.
- G. ZHENG et al., “Corrosion of 316 Stainless Steel in High Temperature Molten Li2BeF4 (FLiBe) Salt,” J. Nucl. Mater., 461, 143 (2015); https://doi.org/10.1016/j.jnucmat.2015.03.004.
- G. Q. ZHENG et al., “High-Temperature Corrosion of UNS N10003 in Molten Li2BeF4 (FLiBe) Salt,” Corrosion, 71, 10, 1257 (2015); https://doi.org/10.5006/1657.
- G. Q. ZHENG et al., “Corrosion-Induced Microstructural Developments in 316 Stainless Steel During Exposure to Molten Li2BeF4 (FLiBe) Salt,” J. Nucl. Mater., 482, 147 (2016); https://doi.org/10.1016/j.jnucmat.2016.10.023.
- K. J. CHAN et al., “Carburization Effects on the Corrosion of Cr, Fe, Ni, W, and Mo in Fluoride-Salt Cooled High Temperature Reactor (FHR) Coolant,” Ann. Nucl. Energy, 120, 279 (2018); https://doi.org/10.1016/j.anucene.2018.05.013.
- C. ANDREADES et al., “Technical Description of the ‘Mark 1’ Pebble-Bed Fluoride-Salt-Cooled High-Temperature Reactor (PB-FHR) Power Plant,” University of California, Berkeley (2014).
- V. K. VARMA et al., “AHTR Mechanical, Structural, and Neutronic Preconceptual Design,” ORNL/TM-2012/320, Oak Ridge National Laboratory (2012).
- Q. LIU et al., “Corrosion Behaviour of 316H Stainless Steel in Molten FLiNaK Eutectic Salt Containing Graphite Particles,” Corros. Sci., 160, 108174 (2019); https://doi.org/10.1016/j.corsci.2019.108174.
- K. J. CHAN and P. M. SINGH, “Carburization of Metals by a Chemical Mechanism of Carbon Transport Through Molten Fluoride Salts,” J. Nucl. Mater., 539, 152307 (2020); https://doi.org/10.1016/j.jnucmat.2020.152307.
- P. BECKER and D. YOUNG, “Carburization Resistance of Nickel-Base, Heat-Resisting Alloys,” Oxid. Met., 67, 5–6, 267 (2007); https://doi.org/10.1007/s11085-007-9058-x.
- L. C. OLSON et al., “Impact of Corrosion Test Container Material in Molten Fluorides,” J. Sol. Energy Eng., 137, 6, 061007 (2015); https://doi.org/10.1115/1.4031682.
- R. S. SELLERS et al., “Corrosion of 316L Stainless Steel Alloy and Hastelloy-N Superalloy in Molten Eutectic LiF-NaF-KF Salt and Interaction with Graphite,” Nucl. Technol., 188, 2, 192 (2014); https://doi.org/10.13182/Nt13-95.
- H. AI et al., “Influence of Graphite-Alloy Interactions on Corrosion of Ni-Mo-Cr Alloy in Molten Fluorides,” J. Nucl. Mater., 503, 116 (2018); https://doi.org/10.1016/j.jnucmat.2018.03.001.
- J. QIU et al., “Compatibility of Container Materials with Cr in Molten FLiNaK Salt,” J. Fluorine Chem., 168, 69 (2014); https://doi.org/10.1016/j.jfluchem.2014.09.010.
- J. W. KOGER, “Fluoride Salt Corrosion and Mass Transfer in High Temperature Dynamic Systems,” CORROSION, 29, 3, 115 (1973); https://doi.org/10.5006/0010-9312-29.3.115.
- L. C. OLSON et al., “Materials Corrosion in Molten LiF-NaF-KF Salt,” J. Fluorine Chem., 130, 1, 67 (2009); https://doi.org/10.1016/j.jfluchem.2008.05.008.
- S. D. GATES-RECTOR and T. N. BLANTON, “The Powder Diffraction File: A Quality Materials Characterization Database,” Powder Diffr., 34, 4, 352 (2019); https://doi.org/10.1017/S0885715619000812.
- R. GEHLBACH and H. McCOY, “Phase Instability in Hastelloy N,” Proc. Int. Symp. Structural Stability in Superalloys, Seven Springs Pennsylvania, 1968, Vol. 1, p. 346 (1968).
- H. McCOY and D. BOURGETTE, “Influence of Aging on the Impact Properties of Hastelloy N, Haynes Alloy No. 25, and Haynes Alloy No. 188,” ORNL-3591, Oak Ridge National Laboratory (1973).
- M. FAHRMANN, S. K. SRIVASTAVA, and L. M. PIKE, Development of a New 760°C (1400°F) Capable Low Thermal Expansion Alloy, pp. 769–777, John Wiley & Sons, Ltd; https://doi.org/10.1002/9781118516430.ch85.
- D. KLARSTROM, “The Development of HAYNES 230 Alloy,” Materials Design Approaches and Experiences, p. 297, in Proc. TMS Fall Mtg., Indianapolis, Indiana, November 4–8, 2001, The Minerals, Metals & Materials Society (2001).
- A. ROINE, HSC Chemistry® 9.7 [Software], Outotec (2018).
- C. WELLS, W. BATZ, and R. F. MEHL, “Diffusion Coefficient of Carbon in Austenite,” JOM, 2, 3, 553 (1950); https://doi.org/10.1007/BF03399032.
- R. SMITH, “The Diffusivity of Carbon in Iron by the Steadystate Method,” Acta Metall., 1, 5, 578 (1953); https://doi.org/10.1016/0001-6160(53)90088-1.
- G. G. TIBBETTS, “Diffusivity of Carbon in Iron and Steels at High Temperatures,” J. Appl. Phys., 51, 9, 4813 (1980); https://doi.org/10.1063/1.328314.
- J. O. ANDERSSON et al., “THERMO-CALC and DICTRA, Computational Tools for Materials Science,” Calphad, 26, 2, 273 (2002); https://doi.org/10.1016/S0364-5916(02)00037-8.
- TCNI Ni-alloys Database Version 9, Thermo-Calc.
- TCFE Steels/Fe-Alloys Database Version 9, Thermo-Calc.