170
Views
1
CrossRef citations to date
0
Altmetric
Note

Thermal-Hydraulic Research Supporting the Development of SMART

ORCID Icon, , ORCID Icon, ORCID Icon, ORCID Icon, ORCID Icon & ORCID Icon show all
Pages 1617-1635 | Received 24 Jun 2022, Accepted 18 May 2023, Published online: 17 Jul 2023

References

  • K. K. KIM et al., “SMART: The First Licensed Advanced Integral Reactor,” J. Energy Power Eng., 8, 94 (2014).
  • “SMART100 Standard Safety Analysis Report,” Korea Hydro & Nuclear Power Company, Korea Atomic Energy Research Institute, King Abdullah City for Atomic and Renewable Energy (2019).
  • K. H. BAE et al., “Enhanced Safety Characteristics of SMART100 Adopting Passive Safety Systems,” Nucl. Eng. Des., 379, 111247 (2021); http://dx.doi.org/10.1016/j.nucengdes.2021.111247.
  • “Rules and Regulations—NuScale Small Modular Reactor Design Certification,” Federal Register, 88, 12, 3287 (2023).
  • M. T. FRIEND et al., “Simulated AP600 Response to Small-Break Loss-of-Coolant-Accident and Non-Loss-of-Coolant Accident Events: Analysis of SPES-2 Integral Test Results,” Nucl. Technol., 122, 1, 19 (1998); http://dx.doi.org/10.13182/NT98-A2848.
  • Y. KUKITA et al., “ROSA/AP600 Testing: Facility Modifications and Initial Test Results,” J. Nucl. Sci. Technol., 33, 3, 259 (1996); http://dx.doi.org/10.1080/18811248.1996.9731898.
  • T. YONOMOTO et al., “Core Makeup Tank Behavior Observed During the ROSA-AP600 Experiments,” Nucl. Technol., 119, 112 (1997); http://dx.doi.org/10.13182/NT97-A35380.
  • L. M. SHOTKIN and Y. KUKITA, “Implications of the ROSA/AP600 High- and Intermediate-Pressure Test Results,” Nucl. Technol., 119, 217 (1997); http://dx.doi.org/10.13182/NT97-A35399.
  • K. Y. CHOI et al., “Major Achievements and Prospect of the ATLAS Integral Effect Tests,” Sci. Technol. Nucl. Install., 2012, 375070 (2012).
  • B. U. BAE et al., “Integral Effect Test and Code Analysis on the Cooling Performance of the PAFS (Passive Auxiliary Feedwater System) During an FLB (Feedwater Line Break) Accident,” Nucl. Eng. Des., 275, 249 (2014); http://dx.doi.org/10.1016/j.nucengdes.2014.05.023.
  • S. U. RYU et al., “Integral Effect Test on Cooling Performance of Hybrid Safety Injection Tank,” Ann. Nucl. Energy, 123, 110 (2019); http://dx.doi.org/10.1016/j.anucene.2018.09.023.
  • F. MASCARI et al., “Analyses of the OSU-MASLWR Experimental Test Facility,” Sci. Technol. Nucl. Install., 2012, 528241 (2012).
  • F. MASCARI et al., “Analysis of the OSU-MASLWR-001 and 002 Tests by Using the TRACE Code,” NUREG/IA-0466, U.S. Nuclear Regulatory Commission (2016).
  • “Progress in Methodologies for the Assessment of Passive Safety System Reliability in Advanced Reactors,” IAEA-TECDOC-1752, International Atomic Energy Agency (2014).
  • F. D. MAIO et al., “Reliability Assessment of Passive Safety Systems for Nuclear Energy Applications: State-of-the-Art and Open Issues,” Energies, 14, 4688 (2021); http://dx.doi.org/10.3390/en14154688.
  • A. K. NAYAK et al., “A Review: Passive System Reliability Analysis—Accomplishments and Unresolved Issues,” Front. Energy Res., 2, 40 (Oct. 2014).
  • F. D’AURIA, “Scaling, Passive Systems, and the AP-1000,” Nucl. Sci. Eng., 197, 987 (2023); http://dx.doi.org/10.1080/00295639.2023.2178874.
  • Y. M. BAE et al. “Report of Passive Safety System,” SER-410-FS403-SD, Korea Atomic Energy Research Institute (2012).
  • H. S. PARK et al., “Design of the VISTA-ITL Facility for an Integral Type Reactor of SMART and a Post-Test Simulation of a SBLOCA Test,” Sci. Technol. Nucl. Install., 2014, 840109 (2014).
  • H. S. PARK et al., “Contribution of Thermal-Hydraulic Validation Tests to the Standard Design Approval of SMART,” Nucl. Eng. Technol., 49, 1537 (2017); http://dx.doi.org/10.1016/j.net.2017.06.009.
  • H.-S. PARK and C.-H. SONG, “SMR Accident Simulation in Experimental Test Loop,” Nucl. Eng. Int., 58, 12 (Nov. 2013).
  • Y. J. CHUNG et al., “Development and Assessment of System Analysis Code, TASS/SMR for Integral Reactor,” Nucl. Eng. Des., 244, 52 (2012); http://dx.doi.org/10.1016/j.nucengdes.2011.12.013.
  • Y. J. CHUNG et al., “Strength Assessment of SMART Design Against Anticipated Transient Without Scram,” Prog. Nucl. Energy, 85, 617 (2015); http://dx.doi.org/10.1016/j.pnucene.2015.08.005.
  • B. D. CHUNG et al., “Development of a Phenomena Identification and Ranking Table (PIRT) of Thermal Hydraulic Phenomena for SMART,” KAERI/TR-3780/2009, Korea Atomic Energy Research Institute (2009).
  • E. BALI et al., “Development of Phenomena Identification and Ranking Table (PIRT) of Thermal-Hydraulic Phenomena for SMART100-DECs to Implement T-H Model and Validation Items in SPACE,” Proc. Korean Nuclear Society Spring Meeting, Jeju, Korea, May 18, 2022.
  • S. J. HA et al., “Development of the SPACE Code for Nuclear Power Plants,” Nucl. Eng. Technol., 43, 1, 45 (2011); http://dx.doi.org/10.5516/NET.2011.43.1.045.
  • F. MORIN et al., “Elaboration of Simplified PIRT Transients for SMR PWR,” ELSMOR (2020).
  • B. D. CHUNG et al. “Development and Assessment of Multi-Dimensional Flow Models in the Thermal-Hydraulic System Analysis Code MARS,” KAERI/TR-3011/2005, Korea Atomic Energy Research Institute (2005).
  • H. S. PARK et al., “An Integral Effect Test of a Complete Loss of Reactor Coolant System Flowrate for the SMART Design Using the VISTA-ITL Facility and Its Simulation with the MARS-KS Code,” J. Sci. Technol., 54, 3, 348 (2017).
  • B. Y. MIN et al., “Experimental Verification on the Integrity and Performance of the Passive Residual Heat Removal System for SMART Design with VISTA-ITL,” Ann. Nucl. Energy, 71, 118 (2014); http://dx.doi.org/10.1016/j.anucene.2014.03.001.
  • S. Y. CHUN et al., “Critical Heat Flux in a Heater Rod Bundle Cooled by R-134a Fluid near the Critical Pressure,” J. Nucl. Sci. Technol., 44, 1189 (2007); http://dx.doi.org/10.1080/18811248.2007.9711362.
  • H. BAE et al., “Comparison of Three Small-Break Loss-of-Coolant Accident Tests with Different Break Locations Using the System-Integrated Modular Advanced Reactor-Integral Test Loop Facility to Estimate the Safety of the Smart Design,” Nucl. Eng. Technol., 49, 968 (2017); http://dx.doi.org/10.1016/j.net.2017.04.006.
  • H. BAE et al., “Core Makeup Tank Injection Characteristics During Different Test Scenarios Using SMART-ITL Facility,” Ann. Nucl. Energy, 126, 10 (2019); http://dx.doi.org/10.1016/j.anucene.2018.11.002.
  • J. H. YANG et al., “Comparison of Two Different Sized Small-Break LOCAs on the Passive Safety Injection Line Using SMART-ITL Data,” Nucl Technol., 206, 1421 (Sep. 2020); http://dx.doi.org/10.1080/00295450.2020.1775450.
  • Y. S. KIM et al., “Investigation of CMT Behavior Between the ATLAS and SMART-ITL Tests,” Ann. Nucl. Energy, 135, 1069 (2020); http://dx.doi.org/10.1016/j.anucene.2019.106979.
  • E. YUN et al., “Experimental Study on a Single-Phase Natural Circulation Loop and Its Steady-State Solution,” Appl. Thermal Eng., 173, 115190 (2020); http://dx.doi.org/10.1016/j.applthermaleng.2020.115190.
  • J. H. YANG et al., “Investigation of Condensation with Non-Condensable Gas in Natural Circulation Loop for Passive Safety System,” Nucl. Eng. Technol., 55, 1125 (2023); http://dx.doi.org/10.1016/j.net.2022.11.022.
  • J. H. YANG et al., “Overview of Separate Effect and Integral System Tests on the SMART100 CPRSS Design,” Proc. ICAPP 2023, Gyeongju, Korea, April 23–27, 2023.
  • H. S. PARK et al., “Experimental Study on the Natural Circulation of a Passive Residual Heat Removal System for an Integral Reactor Following a Safety Related Event,” Ann. Nucl. Energy, 35, 2249 (2008); http://dx.doi.org/10.1016/j.anucene.2008.09.006.
  • Y. J. CHUNG et al., “Validation with the MARS and TASS/SMR Codes Based on Experimental Results of a Pressurizer Safety Valve Line Break at the SMART-ITL Facility,” Ann. Nucl. Energy, 141, 107344 (2020); http://dx.doi.org/10.1016/j.anucene.2020.107344.
  • B. G. JEON et al., “Code Validation on a Passive Safety System Test with the SMART-ITL Facility,” J. Nucl. Sci. Technol., 54, 3, 322 (2017).
  • Y. S. KIM et al., “Investigation of Thermal Hydraulic Behavior of SBLOCA Tests in SMART-ITL Facility,” Ann. Nucl. Energy, 113, 25 (2018); http://dx.doi.org/10.1016/j.anucene.2017.11.013.
  • B. G. JEON et al., “Experimental and Analytical Investigation on SMART Passive Safety Systems for Three 2-inch SBLOCA Tests Using SMART-ITL,” Ann. Nucl. Energy, 188, 109835 (2023); http://dx.doi.org/10.1016/j.anucene.2023.109835.
  • A. N. NAHAVANDI et al., “Scaling Laws for Modeling Nuclear Reactor Systems,” J. Nucl. Sci. Eng., 72, 75 (1979); http://dx.doi.org/10.13182/NSE79-A19310.
  • M. ISHII and I. KATAOKA, “Similarity Analysis and Scaling Criteria for LWR’s Under Single-Phase and Two-Phase Natural Circulation,” NUREG/CR-3267, ANL-83-32, U.S. Nuclear Regulatory Commission (1983).
  • B. J. YOON et al., “Scaling for the ECC Bypass Phenomena During the LBLOCA Phase,” Nucl. Eng. Des., 231, 315 (2004); http://dx.doi.org/10.1016/j.nucengdes.2004.04.005.
  • J. H. YANG et al. “Condensation Experiments with Non-Condensable Gas in Closed Loop Using Local Measurement Method,” Proc. NURETH-19, Brussels, Belgium, March 6–11, 2022.
  • Y. J. CHUNG et al., “Assessment of TASS/SMR Code for a Loss of Coolant Flow Transient Using Results of Integral Type Test Facility,” Ann. Nucl. Energy, 92, 1, 1 (2016); http://dx.doi.org/10.1016/j.anucene.2016.01.024.

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.