http://orcid.org/0000-0002-3773-0707
References
- C. FORSBERG, P. PETERSON, and P. PICKARD, “Molten-Salt-Cooled Advanced High-Temperature Reactor for Production of Hydrogen and Electricity,” Nucl. Technol., 144, 289 (2003); https://doi.org/10.13182/NT03-1.
- D. HOLCOMB et al., “Core and Refueling Design Studies for the Advanced High Temperature Reactor,” ORNL/TM-2011/365, Oak Ridge National Laboratory (Sep. 30, 2011).
- D. HOLCOMB, F. PERETZ, and A. QUALLS, “Advanced High Temperature Reactor Systems and Economic Analysis,” ORNL/TM-2011/364, Oak Ridge National Laboratory (Sep. 30, 2011).
- M. FRATONI and E. GREENSPAN, “Neutronic Feasiblity Assessment of Liquid Salt–Cooled Pebble Bed Reactors,” Nucl. Sci. Eng., 168, 1 (2011); https://doi.org/10.13182/NSE10-38.
- D. HOLCOMB et al., “Fluoride Salt-Cooled High-Temperature Reactor Technology Development and Demonstration Roadmap,” ORNL/TM-2013/401, Oak Ridge National Laboratory (Sep. 2013).
- P. AVIGNI, “Thermal Hydraulic Modeling of the Advanced High Temperature Reactor for the Evaluation of Steady State and Transient Conditions,” Master’s Thesis, Politecnico Di Milano (2012).
- J. LEPPÄNEN, “Serpent—A Continuous-Energy Monte Carlo Reactor Physics Burnup Calculation Code,” VTT Technical Research Centre of Finland (Aug. 16, 2012).
- A. T. CISNEROS and D. ILAS, “Neutronics and Depletion Methods for Multibatch Fluoride Salt–Cooled High-Temperature Reactors with Slab Fuel Geometry,” Nucl. Technol., 183, 331 (2013); https://doi.org/10.13182/NT13-A19422.
- S. M. LEWIS, “Simplified Core Physics and Fuel Cycle Cost Model for Preliminary Evaluations of LSCR Fueling Options,” Master’s Thesis, Georgia Institute of Technology (2014).
- K. A. TERRANI et al., “Fabrication and Characterization of Fully Ceramic Microencapsulated Fuels,” J. Nucl. Mater., 426, 268 (2012); https://doi.org/10.1016/j.jnucmat.2012.03.049.
- K. A. TERRANI, L. L. SNEAD, and J. C. GEHIN, “Microencapsulated Fuel Technology for Commercial Light Water and Advanced Reactor Application,” J. Nucl. Mater., 427, 209 (2012); https://doi.org/10.1016/j.jnucmat.2012.05.021.
- V. S. VOLKOV et al., “Use of Burnable Poisons in Nuclear Reactors,” At. Energ., 11, 109 (1961); https://doi.org/10.1007/BF01626442.
- V. K. VARMA et al., “AHTR Mechanical, Structural, and Neutronic Preconceptual Design,” ORNL/TM-2012/320, Oak Ridge National Laboratory (Sep. 2012).
- J. WASHINGTON et al., “Selection and Evaluation of Potential Burnable Absorbers Incorporated into Modified TRISO Particles,” Nucl. Eng. Des., 278, 377 (2014); https://doi.org/10.1016/j.nucengdes.2014.07.033.
- A. TALAMO et al., “Alternative Configurations for the QUADRISO Fuel Design Concept,” J. Nucl. Mater., 383, 264 (2014); https://doi.org/10.1016/j.jnucmat.2008.09.010.
- “Watts Bar Unit 2 Final Safety Analysis Report (FSAR),” Amendment 93, Section 4, ML091400651 (Apr. 30, 2009).
- C. A. GENTRY, G. I. MALDONADO, and K. S. KIM, “Development of Two-Step Analysis Procedure for the Advanced High Temperature Reactor,” Proc. PHYSOR 2016, Sun Valley, Idaho, May 1–5, 2016.