References
- J. JUDAH, “Overview of Fuel Inspections at the Darlington Nuclear Generating Station,” Third Int. Conf. CANDU Fuel, Chalk River, Canada, October 4–8, 1992, Vol. 3, p. 1 (1992).
- A. G. NORSWORTHY and A. DITSCHUN, “Fuel Bundle to Pressure Tube Fretting in Bruce and Darlington,” Canadian Nuclear Society Proc. 16 Annual Conf., Saskatoon, Canada, June 4–7, 1995.
- A. G. NORSWORTHY et al., “Fuel Bundle to Pressure Tube Fretting in Bruce and Darlington Reactors,” Canadian Nuclear Society Proc. 15th Annual Conf., Montréal, Canada, Vol. 2, p. 2 (1994).
- K. B. LEE and H. G. JANG, “A Numerical Prediction on the Turbulent Flow in Closely Spaced Bare Rod Arrays by a Nonlinear k-ε Model,” Nucl. Eng. Des., 172, 351 (1997); https://doi.org/10.1016/S0029-5493(97)00001-0.
- J. D. HOOPER and K. REHME, “Large-Scale Structural Effects in Developed Turbulent Flow through Closely-Spaced Rod Arrays,” J. Fluid Mech., 145, 305 (1984); https://doi.org/10.1017/S0022112084002949.
- C. TZANOS, “Performance of k-ε Turbulence Models in the Simulation of LWR Fuel-Bundle Flows,” Trans. Am. Nucl. Soc., 84, 197 (2001); https://www.osti.gov/scitech/biblio/813818 ( current as of Jan. 2, 2017).
- G. YADIGAROGLU et al., “Trends and Needs in Experimentation and Numerical Simulation for LWR Safety,” Nucl. Eng. Des., 221, 205 (2003); https://doi.org/10.1016/S0029-5493(02)00339-4.
- Y. K. SUH and M. F. LIGHTSTONE, “Numerical Simulation of Turbulent Flow and Mixing in a Rod Bundle Geometry,” Nucl. Energy, 43, 3, 153 (2004); https://inis.iaea.org/search/search.aspx?orig_q=RN:36041008 (current as of Jan. 2, 2017).
- C. W. RAPLEY, “The Prediction of Fully Developed Axial Turbulent Flow in Rod Bundles,” Nucl. Eng. Des., 97, 313 (1986); https://doi.org/10.1016/0029-5493(86)90167-6.
- E. BAGLIETTO, H. NINOKATA, and T. MISAWA, “CFD and DNS Methodologies Development for Fuel Bundle Simulations,” Nucl. Eng. Des., 236, 1503 (2006); https://doi.org/10.1016/j.nucengdes.2006.03.045.
- D. CHANG and S. TAVOULARIS, “Numerical Simulation of Turbulent Flow in a 37-Rod Bundle,” Nucl. Eng. Des., 237, 575 (2007); https://doi.org/10.1016/j.nucengdes.2006.08.001.
- S. K. KANG and Y. A. HASSAN, “Computational Fluid Dynamics (CFD) Round Robin Benchmark for a Pressurized Water Reactor (PWR) Rod Bundle,” Nucl. Eng. Des., 301, 204 (2016); https://doi.org/10.1016/j.nucengdes.2016.03.007.
- F. ABBASIAN, S. D. YU, and J. CAO, “Experimental and Numerical Investigations of Three-Dimensional Turbulent Flow of Water Surrounding a CANDU Simulation Fuel Bundle Structure inside a Channel,” Nucl. Eng. Des., 239, 11, 2224 (2009); https://doi.org/10.1016/j.nucengdes.2009.06.012.
- X. ZHANG and S. D. YU, “Large Eddy Simulation of Turbulent Flow Surrounding Two Simulated CANDU Fuel Bundles,” Nucl. Eng. Des., 241, 9, 3553 (2011); https://doi.org/10.1016/j.nucengdes.2011.06.035.
- A. BHATTACHARYA, S. D. YU, and G. KAWALL, “Numerical Simulation of Turbulent Flow through a 37-Element CANDU Fuel Bundle,” Ann. Nucl. Energy, 40, 87 (2012); https://doi.org/10.1016/j.anucene.2011.10.017.
- M. H. A. PIRO et al., “Progress in On-Going Experimental and Computational Fluid Dynamic Investigations within a CANDU Fuel Channel,” Nucl. Eng. Des., 299, 184 (2016); https://doi.org/10.1016/j.nucengdes.2015.07.009.
- M. H. A. PIRO et al., “Experimental and Computational Investigation of Flow By-Pass in a 37-Element CANDU Fuel Bundle in a Crept Pressure Tube,” OECD/NEA & IAEA Workshop on Computational Fluid Dynamics for Nuclear Reactor Safety, Cambridge, Massachusetts (2016).
- F. ANSELMET et al., “Axial Development of the Mean Flow in the Entrance Region of Turbulent Pipe and Duct Flows,” Comptes Rendus - Mécanique, 337, 8, 573 (2009); https://doi.org/10.1016/j.crme.2009.07.001.
- B. H. OUMA and S. TAVOULARIS, “Turbulence Structure in Triangular Subchannels of a Reactor Bundle Model,” Nucl. Eng. Des., 128, 271 (1991); https://doi.org/10.1016/0029-5493(91)90166-F.
- H. R. BARSAMINA and Y. A. HASSAN, “Large Eddy Simulation of Turbulent Cross Flow in Tube Bundles,” Nucl. Eng. Des., 172, 103 (1997); https://doi.org/10.1016/S0029-5493(97)00034-4.
- P. SAGAUT, Large Eddy Simulation for Incompressible Flow, Springer-Verlag Berlin, Heidelberg, Germany (2006).
- ANSYS Academic Research, Release 14. ANSYS FLUENT Theory Guide, ANSYS, Inc. (2016).
- T. J. CHUNG, Computational Fluid Dynamics, 1st ed., Cambridge University Press, Cambridge, United Kingdom (2002).
- J. S. SMAGORINSKY, “General Circulation Experiments with the Primitive Equations, Part I: The Basic Experiment,” Mon. Weather Rev., 91, 99 (1963); https://doi.org/10.1175/1520-0493(1963)091<0099:GCEWTP>2.3.CO;2.
- M. GERMANO et al., “A Dynamic Subgrid-Scale Eddy Viscosity Model,” Phys. Fluids A, 3, 7, 1760 (1991); https://doi.org/10.1063/1.857955.
- D. K. LILLY, “A Proposed Modification of the Germano Subgrid-Scale Closure Model,” Phys. Fluids A, 4, 3, 633 (1992); https://doi.org/10.1063/1.858280.
- J. EGGELS, Direct and Large Eddy Simulation of Turbulent Flow in a Cylindrical Pipe Geometry, Delft University Press, Delft, Netherlands (1994).
- H. TENNEKES and J. L. LUMLEY, A First Course in Turbulence, The MIT Press, Massachusetts, United States (1972).
- R. KRAICHNAN, “Diffusion by a Random Velocity Field,” Phys. Fluids, 11, 21 (1970); http://dx.doi.org/10.1063/1.1692799.
- R. SMIRNOV, S. SHI, and I. CELIK, “Random Flow Generation Technique for Large Eddy Simulations and Particle-Dynamics Modeling,” J. Fluids Eng., 123, 359 (2001); https://doi.org/10.1115/1.1369598.