References
- G. E. WILSON, “Historical Insights in the Development of Best Estimate Plus Uncertainty Safety Analysis,” Ann. Nucl. Energy, 52, 2 (2013); https://doi.org/10.1016/j.anucene.2012.03.002.
- H. GLAESER et al., “Uncertainty and Sensitivity Analysis of a Post-Experiment Calculation in Thermal Hydraulics,” Reliabil. Eng. Syst. Safe., 45, 1–2, 19 (1994); https://doi.org/10.1016/0951-8320(94)90073-6.
- H. GLAESER et al., “BEMUSE Phase VI Report: Status Report on the Area, Classification of the Methods, Conclusions and Recommendations,” Nuclear Energy Agency Committee on the Safety of Nuclear Installations (2011).
- X. WU and T. KOZLOWSKI, “Inverse Uncertainty Quantification of Reactor Simulations Under the Bayesian Framework Using Surrogate Models Constructed by Polynomial Chaos Expansion,” Nucl. Eng. Des., 313, 29 (2017); https://doi.org/10.1016/j.nucengdes.2016.11.032.
- C. WANG, X. WU, and T. KOZLOWSKI, “Surrogate-Based Inverse Uncertainty Quantification of TRACE Physical Model Parameters Using Steady-State PSBT Void Fraction Data,” Proc. 17th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH-17), Xi’an, Shaanxi, China, September 3–8, 2017, American Nuclear Society (2017).
- M. C. KENNEDY and A. O’HAGAN, “Bayesian Calibration of Computer Models,” J. R. Stat. Soc. Ser. B, 63, 3, 425 (2001); https://doi.org/10.1111/1467-9868.00294.
- X. WU et al., “Inverse Uncertainty Quantification Using the Modular Bayesian Approach Based on Gaussian Process, Part 1: Theory,” Nucl. Eng. Des., 335, 339 (2018); https://doi.org/10.1016/j.nucengdes.2018.06.004.
- G. HU and T. KOZLOWSKI, “Inverse Uncertainty Quantification of Trace Physical Model Parameters Using BFBT Benchmark Data,” Ann. Nucl. Energy, 96, 197 (2016); https://doi.org/10.1016/j.anucene.2016.05.021.
- D. G. CACUCI and M. IONESCU-BUJOR, “Best-Estimate Model Calibration and Prediction Through Experimental Data Assimilation—I: Mathematical Framework,” Nucl. Sci. Eng., 165, 1, 18 (2010); https://doi.org/10.13182/NSE09-37B.
- A. PETRUZZI, D. G. CACUCI, and F. D’AURIA, “Best-Estimate Model Calibration and Prediction Through Experimental Data Assimilation—II: Application to a Blowdown Benchmark Experiment,” Nucl. Sci. Eng., 165, 1, 45 (2010); https://doi.org/10.13182/NSE09-37C.
- M. C. BADEA, D. G. CACUCI, and A. F. BADEA, “Best-Estimate Predictions and Model Calibration for Reactor Thermal Hydraulics,” Nucl. Sci. Eng., 172, 1, 1 (2012); https://doi.org/10.13182/NSE11-10.
- A. BUI et al., “Two-Phase Flow and Heat Transfer Model Calibration and Code Validation—A Subcooled Boiling Flow Case Study,” Proc. 15th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH-15), Pisa, Italy, May 12–17, 2013. A. BUI et al., “Two-Phase Flow and Heat Transfer Model Calibration and Code Validation—A Subcooled Boiling Flow Case Study,” CASL-U-2013-0101-000, Consortium for Advanced Simulation of LWRs.
- A. BUI, B. WILLIAMS, and N. DINH, “Advanced Calibration and Validation of a Mechanistic Model of Subcooled Boiling Two-Phase Flow,” Proc. Int. Congress Advances in Nuclear Power Plants, Charlotte, North Carolina, April 6–9, 2014, American Nuclear Society (2014).
- X. WU et al., “Inverse Uncertainty Quantification Using the Modular Bayesian Approach Based on Gaussian Process, Part 2: Application to TRACE,” Nucl. Eng. Des., 335, 417 (2018); https://doi.org/10.1016/j.nucengdes.2018.06.003.
- F. BACHOC et al., “Calibration and Improved Prediction of Computer Models by Universal Kriging,” Nucl. Sci. Eng., 176, 1, 81 (2014); https://doi.org/10.13182/NSE12-55.
- J. HEO, P. J. TURINSKY, and J. M. DOSTER, “Optimization of Thermal-Hydraulic Reactor System for SMRs via Data Assimilation and Uncertainty Quantification,” Nucl. Sci. Eng., 173, 3, 293 (2013); https://doi.org/10.13182/NSE11-113.
- D. HIGDON et al., “Calibration of Tuning Parameters in the FRAPCON Model,” Ann. Nucl. Energy, 52, 95 (2013); https://doi.org/10.1016/j.anucene.2012.06.018.
- X. WU, T. KOZLOWSKI, and H. MEIDANI, “Kriging-Based Inverse Uncertainty Quantification of Nuclear Fuel Performance Code BISON Fission Gas Release Model Using Time Series Measurement Data,” Reliab. Eng. Syst. Saf., 169, 422 (2018); https://doi.org/10.1016/j.ress.2017.09.029.
- T. N. NGUYEN and T. J. DOWNAR, “Surrogate-Based Multi-Experiment Calibration of the BISON Fission Gas Behavior Model,” Nucl. Eng. Des., 320, 409 (2017); https://doi.org/10.1016/j.nucengdes.2017.06.007.
- X. WU et al., “Inverse Uncertainty Quantification of TRACE Physical Model Parameters Using Sparse Gird Stochastic Collocation Surrogate Model,” Nucl. Eng. Des., 319, 185 (2017); https://doi.org/10.1016/j.nucengdes.2017.05.011.
- H. STRIPLING et al., “A Calibration and Data Assimilation Method Using the Bayesian MARS Emulator,” Ann. Nucl. Energy, 52, 103 (2013); https://doi.org/10.1016/j.anucene.2012.08.025.
- J. P. YURKO, J. BUONGIORNO, and R. YOUNGBLOOD, “Demonstration of Emulator-Based Bayesian Calibration of Safety Analysis Codes: Theory and Formulation,” Sci. Technol. Nucl. Install., 2015 (2015); https://doi.org/10.1155/2015/839249.
- “OECD/NRC Benchmark Based on NUPEC PWR Sub-Channel and Bundle Test (PSBT),” Organisation for Economic Co-operation and Development/Nuclear Energy Agency (2012).
- S. BAJOREK et al., “TRACE V5.0 Theory Manual, Field Equations, Solution Methods and Physical Models,” U.S. Nuclear Regulatory Commission (2008).
- X. WU, “Metamodel-Based Inverse Uncertainty Quantification of Nuclear Reactor Simulators Under the Bayesian Framework,” PhD Thesis, University of Illinois at Urbana-Champaign (2017).
- C. E. RASMUSSEN, “Gaussian Processes in Machine Learning,” Advanced Lectures on Machine Learning, pp. 63–71, Springer (2004).
- M. A. TANNER and W. H. WONG, “The Calculation of Posterior Distributions by Data Augmentation,” J. Am. Stat. Assoc., 82, 398, 528 (1987); https://doi.org/10.1080/01621459.1987.10478458.
- A. E. GELFAND and A. F. SMITH, “Sampling-Based Approaches to Calculating Marginal Densities,” J. Am. Stat. Assoc., 85, 410, 398 (1990); https://doi.org/10.1080/01621459.1990.10476213.
- D. GAMERMAN and H. F. LOPES, Markov Chain Monte Carlo: Stochastic Simulation for Bayesian Inference, CRC Press (2006).
- C. ANDRIEU and J. THOMS, “A Tutorial on Adaptive MCMC,” Stat. Comput., 18, 4, 343 (2008); https://doi.org/10.1007/s11222-008-9110-y.
- A. SALTELLI, “Making Best Use of Model Evaluations to Compute Sensitivity Indices,” Comput. Phys. Commun., 145, 2, 280 (2002); https://doi.org/10.1016/S0010-4655(02)00280-1.
- A. SALTELLI et al., Global Sensitivity Analysis: The Primer, John Wiley & Sons (2008).
- C. WANG, X. WU, and T. KOZLOWSKI, “Sensitivity and Uncertainty Analysis of TRACE Physical Model Parameters Based on PSBT Benchmark Using Gaussian Process Emulator,” Proc. 17th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics (NURETH-17), Xi’an, Shaanxi, China, September 3–8, 2017, American Nuclear Society (2017).
- I. M. SOBOL, “Sensitivity Estimates for Nonlinear Mathematical Models,” Math. Model. Comput. Exp., 1, 4, 407 (1993).
- A. SALTELLI et al., “Variance Based Sensitivity Analysis of Model Output. Design and Estimator for the Total Sensitivity Index,” Comput. Phys. Commun., 181, 2, 259 (2010); https://doi.org/10.1016/j.cpc.2009.09.018.
- B. SUDRET, “Global Sensitivity Analysis Using Polynomial Chaos Expansions,” Reliab. Eng. Syst. Saf., 93, 7, 964 (2008); https://doi.org/10.1016/j.ress.2007.04.002.
- T. J. SANTNER, B. J. WILLIAMS, and W. I. NOTZ, The Design and Analysis of Computer Experiments, Springer Science & Business Media (2013).
- F. PEDREGOSA et al., “Scikit-Learn: Machine Learning in Python,” J. Machine Learn. Res., 12, 2825 (2011).
- P. D. ARENDT, D. W. APLEY, and W. CHEN, “Quantification of Model Uncertainty: Calibration, Model Discrepancy, and Identifiability,” J. Mech. Des., 134, 10, 100908 (2012); https://doi.org/10.1115/1.4007390.
- X. WU, K. SHIRVAN, and T. KOZLOWSKI, “Demonstration of the Relationship Between Sensitivity and Identifiability for Inverse Uncertainty Quantification,” arXiv:1801.10309 (2018).