References
- S. B. ROSS and M. S. EL-GENK, “Thermal Conductivity Correlation for Uranium Nitride Fuel Between 10 and 1923 K,” J. Nucl. Mater., 151, 318 (1988); https://doi.org/10.1016/0022-3115(88)90026-8.
- J. A. WEBB and I. CHARIT, “Analytical Determination of Thermal Conductivity of W-UO2 and W-UN CERMET Nuclear Fuels,” J. Nucl. Mater., 427, 1–3, 87 (2012); https://doi.org/10.1016/j.jnucmat.2012.04.020.
- Y. ARAI et al., “Chemical Forms of Solid Fission Products in the Irradiated Uranium-Plutonium Mixed Nitride Fuel,” J. Nucl. Mater., 210, 161 (1994); https://doi.org/10.1016/0022-3115(94)90233-X.
- G. J. YOUINOU and R. S. SEN, “Impact of Accident-Tolerant Fuels and Claddings on the Overall Fuel Cycle: A Preliminary Systems Analysis,” Nucl. Technol., 188, 2, 123 (2014); https://doi.org/10.13182/NT14-22.
- R. M. DELL, V. J. WHEELER, and N. J. BRIDGER, “Hydrolysis of Uranium Mononitride,” Trans. Faraday Soc., 63, 1286 (1967); https://doi.org/10.1039/tf9676301286.
- S. SUGIHARA and S. IMOTO, “Hydrolysis of Uranium Nitrides,” J. Nucl. Sci. Technol., 6, 5, 237 (1969); https://doi.org/10.1080/18811248.1969.9732878.
- L. M. FERRIS, “Reactions of Uranium Mononitride, Thorium Monocarbide and Uranium Moonocarbide with Nitric Acid and Other Aqueous Reagents,” J. Inorg. Nucl. Chem., 30, 2661 (1968); https://doi.org/10.1016/0022-1902(68)80393-8.
- G. A. RAMA RAO et al., “Oxidation and Hydrolysis Kinetic Studies on UN,” J. Nucl. Mater., 185, 231 (1991); https://doi.org/10.1016/0022-3115(91)90340-D.
- A. HERMAN and C. EKBERG, “A Uranium Nitride Doped with Chromium, Nickel or Aluminum as an Accident Tolerant Fuel,” Res. Rev. J. Mater. Sci., 5, 4, 83 (2017); https://doi.org/10.4172/2321-6212.1000196.
- B. BEVERSKOG and I. PUIGDOMENECH, “Revised Pourbaix Diagrams for Chromium at 25-300°C,” Corros. Sci., 39, 1, 43 (1997); https://doi.org/10.1016/S0010-938X(97)89244-X.
- D. A. JONES, Principles and Prevention of Corrosion, Chapter 4. Passivity, Prentice-Hall, Inc. (1996).
- P. AALTONEN and H. HANNINEN, “Water Chemistry and Behaviour of Materials in PWRs and BWRs,” in “Report of an Advisory Group Meeting on Design Approaches for Heating Reactors,” p. 205, International Atomic Energy Agency (1997).
- “Power Plant Chemistry Measurement Advancements: Oxidation Reduction Potential,” Honeywell; https://www.honeywellprocess.com/library/marketing/notes/power-plant-chemistry-measurement-advancements-orp.pdf ( current as of 2013).
- N. TAKENO, “Atlas of Eh-pH Diagrams, Intercomparison of Thermodynamic Databases,” p. 419, National Institute of Advanced Industrial Science and Technology Research Center for Deep Geological Environments (2005).
- “Neutron Cross Section of the Elements”; http://periodictable.com/Properties/A/NeutronCrossSection.html ( current as of Dec. 2018).
- N. R. BROWN et al., “Neutronic Performance of Uranium Nitride Composite Fuels in a PWR,” Nucl. Eng. Des., 275, 393 (2014); https://doi.org/10.1016/j.nucengdes.2014.04.040.
- K. D. JOHNSON et al., “Fabrication and Microstructural Analysis of UN-U3Si2 Composites for Accident Tolerant Fuel Applications,” J. Nucl. Mater., 477, 18 (2016); https://doi.org/10.1016/j.jnucmat.2016.05.004.
- J. LEPPÄNEN, “Serpent—A Continuous-Energy Monte Carlo Reactor Physics Burnup Calculation Code,” VTT Technical Research Centre of Finland (2012).
- J. ZAKOVA and J. WALLENIUS, “Fuel Residence Time in BWRs with Nitride Fuels,” Ann. Nucl. Energy, 47, 182 (2012); https://doi.org/10.1016/j.anucene.2012.03.033.
- J. FINK, “Thermophysical Properties of Uranium Dioxide,” J. Nucl. Mater., 279, 1, 1 (2000); https://doi.org/10.1016/S0022-3115(99)00273-1.
- G. LEINDERS et al., “Accurate Lattice Parameter Measurements of Stoichiometric Uranium Dioxide,” J. Nucl. Mater., 459, 135 (2015); https://doi.org/10.1016/j.jnucmat.2015.01.029.
- S. HAYES, J. THOMAS, and K. PEDDICORD, “Material Property Correlations for Uranium Mononitride: I. Physical Properties,” J. Nucl. Mater., 171, 2, 262 (1990); https://doi.org/10.1016/0022-3115(90)90374-V.
- S. HAYES, J. THOMAS, and K. PEDDICORD, “Material Property Correlations for Uranium Mononitride: IV. Thermodynamic Properties,” J. Nucl. Mater., 171, 2, 300 (1990); https://doi.org/10.1016/0022-3115(90)90377-Y.
- S. HAYES, J. THOMAS, and K. PEDDICORD, “Material Property Correlations for Uranium Mononitride: III. Transport Properties,” J. Nucl. Mater., 171, 2, 289 (1990); https://doi.org/10.1016/0022-3115(90)90376-X.
- N. R. BROWN, M. TODOSOW, and A. CUADRA, “Screening of Advanced Cladding Materials and UN-U3Si5 Fuel,” J. Nucl. Mater., 462, 26 (2015); https://doi.org/10.1016/j.jnucmat.2015.03.016.
- M. J. DRISCROLL, T. J. DOWNAR, and E. E. PILAT, The Linear Reactivity Model for Nuclear Fuel Management, Americal Nuclear Society, La Grange Park, Illinois (1990).
- K. INSULANDER BJÖRK, V. FHAGER, and C. DEMAZIÈRE, “Comparison of Thorium-Based Fuels with Different Fissile Components in Existing Boiling Water Reactors,” Prog. Nucl. Energy, 53, 6, 618 (2011); https://doi.org/10.1016/j.pnucene.2010.03.004.
- A. SAJDOVA, “Accident-Tolerant Uranium Nitride,” p. 76, Chalmers University of Technology (2017).
- K.-C. JEONG et al., “UO3 Intermediate Particle Preparation Using the Sol-Gel Process,” Trans. Korean Nucl. Soc. (2005); https://www.kns.org/files/pre_paper/17/231%EC%A0%95%EA%B2%BD%EC%B1%84.pdf ( current as of Feb. 2019).
- K. IDEMITSU et al., “Manufacturing of Zirconia Microspheres Doped with Erbia, Yttria and Ceria by Internal Gelation Process as a Part of a Cermet Fuel,” J. Nucl. Mater., 319, 31 (2003); https://doi.org/10.1016/S0022-3115(03)00130-2.
- P. A. LESSING, “Oxidation Protection of Uranium Nitride Fuel Using Liquid Phase Sintering,” INL/EXT2012;12-24974, Idaho National Laboratory (2012); https://doi.org/.
- W. THURBER and R. BEAVER, “Segregation in Uranium-Aluminum Alloys and Its Effect on the Fuel Loading of Aluminum-Base Fuel Elements,” Oak Ridge National Laboratory (1958).