211
Views
0
CrossRef citations to date
0
Altmetric
Technical Notes

Evaluation of Discharged Fuel in Preproposed Breed-and-Burn Reactors from Proliferation, Decay Heat, and Radiotoxicity Aspects

, &
Pages 405-413 | Received 08 Nov 2019, Accepted 14 Dec 2019, Published online: 29 Jan 2020

References

  • H. SEKIMOTO, “A Review of CANDLE Burn-Up in Nuclear Reactors,” Int. J. Integr. Energy Syst. Ser. Publ., 1, 79 (2009).
  • T. ELLIS et al., “Traveling-Wave Reactors: A Truly Sustainable and Full-Scale Resource for Global Energy Needs,” Proc. Int. Congress on Advances in Nuclear Power Plants (ICAPP2010), San Diego, California, June 13–17, 2010.
  • T. OBARA, K. KUWAGAKI, and J. NISHIYAMA, “Feasibility of Burning Wave Fast Reactor Concept with Rotational Fuel Shuffling,” Proc. Int. Conf. of Fast Reactors and Related Fuel Cycles: Next Generation Nuclear Systems for Sustainable Development (FR17), Yekaterinburg, Russia, June 6–29, 2017.
  • K. KUWAGAKI, J. NISHIYAMA, and T. OBARA, “Concept of Stationary Wave Reactor with Rotational Fuel Shuffling,” Nucl. Sci. Eng., 191, 178 (2018); https://doi.org/10.1080/00295639.2018.1463744.
  • K. KUWAGAKI, J. NISHIYAMA, and T. OBARA, “Concept of Breed and Burn Reactor with Spiral Fuel Shuffling,” Ann. Nucl. Energy, 127, 130 (2019); https://doi.org/10.1016/j.anucene.2018.12.006.
  • M. B. TOLOCZKO, F. A. GARNER, and C. R. EIHOLZER, “Irradiation Creep and Swelling of the US Fusion Heats of HT9 and 9Cr-lMo to 208 dpa at ~400°C,” J. Nucl. Mater., 212–215, 604 (1994); https://doi.org/10.1016/0022-3115(94)90131-7.
  • J. GILLELAND, R. PETROSKI, and K. WEAVER, “The Traveling Wave Reactor: Design and Development,” Engineering, 2, 88 (2016); https://doi.org/10.1016/J.ENG.2016.01.024.
  • J. C. HESSON et al., “Description and Proposed Operation of the Fuel Cycle Facility for the Second Experimental Breeder Reactor (EBR-II),” ANL-6605, Argonne National Laboratory (1987).
  • F. HEIDET and E. GREENSPAN, “Super-PRISM Sized Breed-and-Burn Sodium-Cooled Core Performance,” Nucl. Technol., 181, 2, 251 (2013); https://doi.org/10.13182/NT13-A15782.
  • V. K. HOANG, J. NISHIYAMA, and T. OBARA, “Design Concepts of Small CANDLE Reactor with Melt-Refining Process,” Prog. Nucl. Energy, 108, 233 (2018); https://doi.org/10.1016/j.pnucene.2018.05.019.
  • T. KAITO et al., “The Tentative Materials Strength Standard of ODS Ferritic Steel Claddings,” JNC TN9400 2005-015, Japan Atomic Energy Research Institute (2005).
  • B. PELLAUD, “Proliferation Aspects of Plutonium Recycling,” C. R. Physique, 3, 1067 (2002); https://doi.org/10.1016/S1631-0705(02)01364-6.
  • A. G. CROFF, “A User’s Manual for the ORlGEN2 Computer Code,” ORNL/TM-7175, Oak Ridge National Laboratory (1980).
  • C. H. CLEMENT, “Compendium of Dose Coefficients Based on ICRP Publication 60,” ICRP Publication 119, International Commission on Radiological Protection (2012); https://doi.org/.
  • Y. ANDO and H. TAKANO, “Estimation of LWR Spent Fuel Composition,” JAERI-Research 99-004, Japan Atomic Energy Research Institute (1999); https://doi.org/.
  • Y. NAKANO and T. OKUBO, “Plutonium Isotopic Composition of High Burnup Spent Fuel Discharged from Light Water Reactors,” Ann. Nucl. Energy, 38, 2689 (2011); https://doi.org/10.1016/j.anucene.2011.08.009.
  • J. AHN, “Effective Application of Partitioning and Transmutation Technologies to Geologic Disposal,” Report Submitted to Japan Atomic Energy Agency for Collaborative Research Between Department of Nuclear Engineering, UCBNE-5101, University of California, Berkeley, and Japan Atomic Energy Agency for FY2005 (2006).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.