217
Views
0
CrossRef citations to date
0
Altmetric
Technical Papers

Computational Analysis of Thermal Striping in Primary Sodium System of Liquid Metal Fast Breeder Reactor Using Finite Volume Method

ORCID Icon, &
Pages 413-427 | Received 09 Aug 2021, Accepted 19 Aug 2022, Published online: 26 Sep 2022

References

  • O. CZESLAW, C. O. POPIEL, and O. TRASS, “Visualization of a Free and Impinging Round Jet,” Exp. Therm. Fluid Sci., 4, 3, 253 (1991); https://doi.org/10.1016/0894-1777(91)90043-Q.
  • A. TOKUHIRO and N. KIMURA, “An Experimental Investigation on Thermal Striping Mixing Phenomena of a Vertical Non-Buoyant Jet with Two Adjacent Buoyant Jets as Measured by Ultrasound Doppler Velocimetry,” J. Nucl. Eng. Des., 188, 1, 49 (1999); https://doi.org/10.1016/S0029-5493(99)00006-0.
  • S. MORIYA et al., “Thermal Striping in Coaxial Jets of Sodium, Water and Air,” Proc. 4th Int. Conf. Liquid Metal Engineering and Technology, Avignon, France, 1988, Vol. 2 ( 1988).
  • T. MURAMATSU, “Investigation on the Reduction Measures of Coolant Temperature Fluctuations Based on Numerical Methods in LMFR Designs,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • M. WAKAMATSU, H. NEI, and K. HASHIGUCHI, “Attenuation of Temperature Fluctuations in Thermal Striping,” J. Nucl. Sci. Technol., 32, 8, 752 (1995); https://doi.org/10.1080/18811248.1995.9731770.
  • J. L. LEE et al., “Numerical Analysis of Thermal Striping Induced High Cycle Thermal Fatigue in a Mixing Tee,” Nucl. Eng. Des., 239, 5, 833 (2009); https://doi.org/10.1016/j.nucengdes.2008.06.014.
  • B. MENANT and M. VILLAND, “Thermal Fluctuations Induced in Conducting Wall by Mixing Sodium Jets: An Application of TRIO-VF Using Large Eddy Simulation Modelling,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • T. MURAMATSU, “Computer Code Developments and Their Validations for the Thermal Striping Phenomena in PNC,” Proc. 3rd Research Coordination Mtg. of IAEA Coordinated Research Programme “Harmonization and Validation of Fast Reactor Thermomechanical and Thermo-Hydraulic Codes and Relations Using Experimental Data, France, 1998.
  • Y. IRITANI et al., “Development of Advanced Numerical Simulation of Thermal Stratification by Highly-Accurate Numerical Method and Experiments,” Proc. Int. Conf. Fast Reactor and Related Fuel Cycles, Kyoto, Japan, 1991.
  • F. SURLE et al., “Comparison Between Sodium Stratification Tests on the CORMORAN Model and TRIO-VF Computation,” Proc. 6th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Grenoble, France, October 5–8, 1993.
  • J. ABRAHAM et al., “Advanced Thermal Hydraulics Design of Commercial SFRs,” Proc. Int. Conf. Fast Reactors and Related Fuel Cycles: Safe Technologies and Sustainable Scenarios (FR13), Paris, France, March 4–7, 2013, IAEA-CN-199/462, International Atomic Energy Agency (2013).
  • D. TENCHINE et al., “Experimental and Numerical Studies on Mixing Jets for Sodium-Cooled Fast Reactors,” Nucl. Eng. Des., 263, 263 (2013); https://doi.org/10.1016/j.nucengdes.2013.06.001.
  • M. J. ACTON, G. LENCI, and E. BAGLIETTO, “Structure-Based Resolution of Turbulence for Sodium Fast Reactor Thermal Striping Applications,” Proc. 16th Int. Topl. Mtg. Nuclear Reactor Thermal Hydraulics, Chicago, Illinois, August 30–September 4, 2015, American Nuclear Society (2015).
  • S. K. CHOI et al., “Large Eddy Simulation of Thermal Striping in the Upper Plenum of the PGSFR,” J. Nucl. Sci. Technol., 52, 6, 878 (2015); https://doi.org/10.1080/00223131.2014.990532.
  • S. LOMPERSKI et al., “Jet Stability and Wall Impingement Flow Field in a Thermal Striping Experiment,” Int. J. Heat Mass Transfer, 115, 1125 (2017); https://doi.org/10.1016/j.ijheatmasstransfer.2017.07.076.
  • P. E. ANGELI, “Verification and Validation of LES of a Triple Parallel Jet Flow in the Context of a Thermal Striping Investigation,” Nucl. Eng. Des., 353, 110210 (2019); https://doi.org/10.1016/j.nucengdes.2019.110210.
  • R. WISER, S. E. BAYS, and S. YOON, “Thermal-Striping Analysis Methodology for Sodium-Cooled Reactor Design,” Int. J. Heat Mass Transfer, 175, 121321 (2021); https://doi.org/10.1016/j.ijheatmasstransfer.2021.121321.
  • Y. JUNG, S. R. CHOI, and J. HONG, “Numerical Analysis of Temperature Fluctuation Characteristics Associated with Thermal Striping Phenomena in the PGSFR,” Nucl. Eng. Technol. (2022); https://doi.org/10.1016/j.net.2022.05.015.
  • R. GAJAPATHY et al., “Thermal Hydraulic Investigations of Intermediate Heat Exchanger in a Pool-Type Fast Breeder Reactor,” Nucl. Eng. Des., 238, 1577 (2008); https://doi.org/10.1016/j.nucengdes.2008.01.005.
  • S. SUYAMBAZHAHAN, S. K. DAS, and T. SUNDARARAJAN, “Numerical Simulation of Flow and Thermal Oscillations in Non-Isothermal Laminar Impinging Jet,” Int. J. Heat Technol., 25, 2, 65 (2007).
  • O. GELINEAU and M. SPERANDIO, “Thermal Fluctuation Problems Encountered in LMFBRs,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • C. BETTS, A. M. JUDD, and M. W. J. LEWIS, “Avoiding Thermal Stripping Damage: Experimentally Based Design Procedures for High Cycle Thermal Fatigue,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • V. A. SOBOLEV and N. G. KUZAVKOV, “Identification of Places with Fluid Temperatures in BN 600 Reactor and Reactor Systems,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • H. T. OHSHIME et al., “Current Status of Studies on Temperature Fluctuation Phenomena in LMFBRs,” Proc. IAEA-IWGFR Specialists’ Mtg. Correlation Between Material Properties and Thermo-Hydraulics Conditions in Liquid Metal-Cooled Fast Reactors (LMFRs), Aix-en-Provence, France, November 22–24, 1994, International Atomic Energy Agency, International Working Group on Fast Reactors (1994).
  • H. MOHAMED, “Rayleigh Model of Radiation Heat Transfer in Spherical Medium,” Int. J. Sci. Res. Eng. Dev., 3, 5, 421 (2020).
  • N. KIMURA, M. NISHIMURA, and H. KAMIDE, “Study on Convective Mixing for Thermal Striping Phenomena-Experimental Analyses on Mixing Process in Parallel Triple-Jet and Comparisons Between Numerical Methods,” Proc. 9th Int. Conf. Nuclear Engineering, Nice, Acropolis, France, April 8–12, 2001, INIS-FR-926 (2001).
  • T. J. CRAFT et al., “Wall-Function Strategies for Use in Turbulent Flow CFD,” Numerical Heat Transfer Handbook (2006); https://doi.org/10.1615/IHTC12.3100.
  • K. VELUSAMY, T. SUNDARARAJAN, and S. SUYAMBAZHAHAN, “CFD Studies in the Prediction of Thermal Striping in an LMFBR,” Proc. Computational Fluid Dynamics for Nuclear Reactor Safety (CFD4NRS), Garching, Munich, Germany, September 5–7, 2006, p. 253 (2006).

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.