TRISO Burnup-Dependent Failure Analysis of a HTGR Design-Basis Accident Using BISON

References

• P. A. DEMKOWICZ, B. LIU, and J. D. HUNN, “Coated Particle Fuel: Historical Perspectives and Current Progress,” J. Nucl. Mater., 515, 434 (2019); https://doi.org/10.1016/j.jnucmat.2018.09.044.
   Web of Science ®Google Scholar
• N. R. BROWN, “A Review of In-Pile Fuel Safety Tests of TRISO Fuel Forms and Future Testing Opportunities in Non-HTGR Applications,” J. Nucl. Mater., 534, 152139 (2020); https://doi.org/10.1016/j.jnucmat.2020.152139.
   Web of Science ®Google Scholar
• N. SATVAT et al., “Neutronics, Thermal-Hydraulics, and Multi-Physics Benchmark Models for a Generic Pebble-Bed Fluoride-Salt-Cooled High Temperature Reactor (FHR),” Nucl. Eng. Des., 384, 111461 (2021); https://doi.org/10.1016/j.nucengdes.2021.111461.
   Web of Science ®Google Scholar
• J. ORTENSI, B. BOER, and A. M. OUGOUAG, “Thermo-Mechanical Analysis of Coated Particle Fuel Experiencing a Fast Control Rod Ejection Transient,” Idaho National Laboratory (2010).
   Google Scholar
• M. UMEDA et al., “Behavior of Coated Fuel Particle of High-Temperature Gas-Cooled Reactor Under Reactivity-Initiated Accident Conditions,” J. Nucl. Sci. Technol., 47, 991 (2010); https://doi.org/10.1080/18811248.2010.9711663.
   Web of Science ®Google Scholar
• J. J. POWERS and B. D. WIRTH, “A Review of TRISO Fuel Performance Models,” J. Nucl. Mater., 405, 74 (2010); https://doi.org/10.1016/j.jnucmat.2010.07.030.
   Web of Science ®Google Scholar
• C. FORSBERG et al., “Fluoride-Salt-Cooled High-Temperature Test Reactor (FHTR): Goals, Options, Ownership, Requirements, Design, Licensing, and Support Facilities,” MIT-ANP-TR-154, Massachusetts Institute of Technology (2014).
   Google Scholar
• “RELAP5-3D Code Manuals, Volumes I-IV and Appendix A,” INL/MIS-15-36723- V2, Idaho National Laboratory (2015).
   Google Scholar
• J. P. GORTON and N. R. BROWN, “Defining the Performance Envelope of Reactivity-Initiated Accidents in a High-Temperature Gas-Cooled Reactor,” Nucl. Eng. Des., 370, 110865 (2020); https://doi.org/10.1016/j.nucengdes.2020.110865.
   Web of Science ®Google Scholar
• C. G. GHEZZI, R. F. KILE, and N. R. BROWN, “TRISO SiC Failure Probability for Reactivity Initiated Accidents in High-Temperature Gas-Cooled Reactors,” Nucl. Sci. Eng., 196, 1361 (2022); https://doi.org/10.1080/00295639.2022.2097466.
   Web of Science ®Google Scholar
• G. STRYDOM et al., “Comparison of the PHISICS/RELAP5-3D Ring and Block Model Results for Phase I of the OECD/NEA MHTGR-350 Benchmark,” Nucl. Technol., 193, 15 (2016); https://doi.org/10.13182/NT14-146.
   Web of Science ®Google Scholar
• J. CLEVELAND, “Modular High-Temperature Gas-Cooled Reactor Short-Term Thermal Response to Flow and Reactivity Transients,” Nucl. Technol., 91, 247 (1990); https://doi.org/10.13182/NT90-A34432.
   Web of Science ®Google Scholar
• C. G. GHEZZI et al., “Sensitivity Analysis Applied to SiC Failure Probability in TRISO Modeled with BISON,” Prog. Nucl. Energy, 153, 104431 (2022); https://doi.org/10.1016/j.pnucene.2022.104431.
   Web of Science ®Google Scholar
• W. JIANG et al., “TRISO Particle Fuel Performance and Failure Analysis with BISON,” J. Nucl. Mater., 548, 152795 (2021); https://doi.org/10.1016/j.jnucmat.2021.152795.
   Web of Science ®Google Scholar
• B. COLLIN et al., “TRISO Fuel Performance Modelling with BISON,” J. Physics: Conference Series, p. 012012, IOP Publishing (2021).
   Google Scholar
• D. R. OLANDER, “Fundamental Aspects of Nuclear Reactor Fuel Elements: Solutions to Problems,” Department of Nuclear Engineering, University of California Berkeley (1976).
   Google Scholar
• J. D. STEMPIEN et al., “AGR-2 TRISO Fuel Post-Irradiation Examination Final Report,” Idaho National Laboratory (2021).
   Google Scholar
• D. MARTIN, “The Thermal Expansion of Solid UO2 and (U, Pu) Mixed Oxides—A Review and Recommendations,” J. Nucl. Mater., 152, 94 (1988); https://doi.org/10.1016/0022-3115(88)90315-7.
   Web of Science ®Google Scholar
• J. FINK, M. CHASANOV, and L. LEIBOWITZ, “Thermophysical Properties of Uranium Dioxide,” J. Nucl. Mater., 102, 17 (1981); https://doi.org/10.1016/0022-3115(81)90541-9.
   Web of Science ®Google Scholar
• H. NABIELEK et al., “Calculation of Particle Temperatures in NSRR Tests,” Japan Atomic Energy Research Institute, unpublished draft from March, 13, 1992.
   Google Scholar
• J. K. FINK, “Thermophysical Properties of Uranium Dioxide,” J. Nucl. Mater., 279, 1 (2000); https://doi.org/10.1016/S0022-3115(99)00273-1.
   Web of Science ®Google Scholar
• J. W. MCMURRAY et al., “Determining the Minimum Required Uranium Carbide Content for HTGR UCO Fuel Kernels,” Ann. Nucl. Energy, 104, 237 (2017); https://doi.org/10.1016/j.anucene.2017.02.023.
   Web of Science ®Google Scholar
• W. F. SKERJANC and P. A. DEMKOWICZ, “PARFUME Theory and Model Basis Report,” Idaho National Laboratory (2018).
   Google Scholar
• F. HO, “NP-MHTGR: Material Models of Pyrocarbon and Pyrolytic Silicon Carbide,” Report CEGA-002820 Rev. 1, CEGA Corporation (1993).
   Google Scholar
• V. BARABASH et al., “The Effect of Low Temperature Neutron Irradiation and Annealing on the Thermal Conductivity of Advanced carbon-based Materials,” J. Nucl. Mater., 307, 1300 (2002); https://doi.org/10.1016/S0022-3115(02)00961-3.
   Web of Science ®Google Scholar
• J. KAAE, “Effect of Irradiation on the Mechanical Properties of Isotropic Pyrolytic Carbons,” J. Nucl. Mater., 46, 121 (1973); https://doi.org/10.1016/0022-3115(73)90130-X.
   Web of Science ®Google Scholar
• R. PRICE and J. BOKROS, “Mechanical Properties of Neutron-Irradiated Pyrolytic Carbons,” J. Nucl. Mater., 21, 158 (1967); https://doi.org/10.1016/0022-3115(67)90147-X.
   Web of Science ®Google Scholar
• W. DESORBO and W. TYLER, “Effect of Irradiation on the Low‐Temperature Specific Heat of Graphite,” J. Chem. Phys., 26, 244 (1957); https://doi.org/10.1063/1.1743278.
   Web of Science ®Google Scholar
• A. J. MIELOSZYK, “Assessing Thermo-Mechanical Performance of ThO₂ and SiC Clad Light Water Reactor Fuel Rods with a Modular Simulation Tool,” Massachusetts Institute of Technology (2015).
   Google Scholar
• L. L. SNEAD et al., “Handbook of SiC Properties for Fuel Performance Modeling,” J. Nucl. Mater., 371, 329 (2007); https://doi.org/10.1016/j.jnucmat.2007.05.016.
   Web of Science ®Google Scholar
• J. STONE et al., “Stress Analysis and Probabilistic Assessment of Multi-Layer SiC-Based Accident Tolerant Nuclear Fuel Cladding,” J. Nucl. Mater., 466, 682 (2015); https://doi.org/10.1016/j.jnucmat.2015.08.001.
   Web of Science ®Google Scholar
• C. LU, R. DANZER, and F. FISCHER, “Fracture Statistics of Brittle Materials: Weibull or Normal Distribution,” Phys. Rev. E, 65, 067102 (2002); https://doi.org/10.1103/PhysRevE.65.067102.
   PubMed Web of Science ®Google Scholar
• P. HOSEMANN et al., “Mechanical Characteristics of SiC Coating Layer in TRISO Fuel Particles,” J. Nucl. Mater., 442, 133 (2013); https://doi.org/10.1016/j.jnucmat.2013.08.041.
   Web of Science ®Google Scholar
• B. V. COCKERAM, “Fracture Strength of Plate and Tubular Forms of Monolithic Silicon Carbide Produced by Chemical Vapor Deposition,” J. Am. Ceram. Soc., 85, 603 (2002); https://doi.org/10.1111/j.1151-2916.2002.tb00139.x.
   Web of Science ®Google Scholar
• D. SCHWEN et al., “Bison Robustness and Performance Improvements,” Idaho National Laboratory (2019).
   Google Scholar
• J. D. HALES et al., “Multidimensional Multiphysics Simulation of TRISO Particle Fuel,” J. Nucl. Mater., 443, 531 (2013); https://doi.org/10.1016/j.jnucmat.2013.07.070.
   Web of Science ®Google Scholar
• W. JIANG, B. W. SPENCER, and J. E. DOLBOW, “Ceramic Nuclear Fuel Fracture Modeling with the Extended Finite Element Method,” Eng. Fract. Mech., 223, 106713 (2020); https://doi.org/10.1016/j.engfracmech.2019.106713.
   Web of Science ®Google Scholar
• S. L. DHULIPALA et al., “Accelerated Statistical Failure Analysis of Multifidelity TRISO Fuel Models,” J. Nucl. Mater., 563, 153604 (2022); https://doi.org/10.1016/j.jnucmat.2022.153604.
   Web of Science ®Google Scholar
• J. D. HUNN et al., “PIE on Safety-Tested AGR-1 Compact 5-1-1,” Oak Ridge National Laboratory (2015).
   Google Scholar
• P. A. DEMKOWICZ et al., “AGR-1 Post Irradiation Examination Final Report,” INL/EXT-15-36407, Idaho National Laboratory (2015).
   Google Scholar
• W. JIANG et al., “Efficient High-Fidelity TRISO Statistical Failure Analysis Using Bison: Applications to AGR-2 Irradiation Testing,” J. Nucl. Mater., 562, 153585 (2022); https://doi.org/10.1016/j.jnucmat.2022.153585.
   Web of Science ®Google Scholar
• B. BOER et al., “Stress Analysis of Coated Particle Fuel in Graphite of High-Temperature Reactors,” Nucl. Technol., 162, 276 (2008); https://doi.org/10.13182/NT08-A3956.
   Web of Science ®Google Scholar