References
- Akhtar F, Askari SJ, Shah KA, et al. Microstructure, mechanical properties, electrical conductivity and wear behavior of high volume TiC reinforced Cu-matrix composites. Mater Charact. 2009;60:327–336.
- Ashby MF. Materials selection in mechanical design. 4th ed. Burlington, MA: Butterworth-Heinemann by Elsevier; Editor 2011.
- Harris AM, Schaffer GB, Page NW. The morphological evolution of hollow shells during the mechanical milling of ductile metals. Scr Mater. 1996;34:67–73.
- Huang JY, Wu YK, Ye HQ. Deformation structures in ball milled copper. Acta Mater. 1996;44:1211–1221.
- Zhao YH, Sheng HW, Lu K. Microstructure evolution and thermal properties in nanocrystalline Fe during mechanical attrition. Acta Mater. 2001;49:365–375.
- Yousefi M, Sharafi S, Mehrolhosseiny A. Correlation between structural parameters and magnetic properties of ball milled nano-crystalline Fe–Co–Si powders. Adv Powder Technol. 2014;25:752–760.
- Song HW, Guo SR, Hu ZQ. A coherent polycrystal model for the inverse Hall-Petch relation in nanocrystalline materials. Nanostruct Mater. 1999;11:203–210.
- Poluboyarov VA, Lapin AE, Korotaeva ZA, et al. Effect of mechanical activation on the reactivity of powder copper. Inorgan Mater. 2005;41:110–119.
- Wen H, Zhao Y, Zhang Z, et al. The influence of oxygen and nitrogen contamination on the densification behavior of cryomilled copper powders during spark plasma sintering. J Mater Sci. 2011;46:3006–3012.
- Khayati GR, Nourafkan E, Karimi G, et al. Synthesis of cuprous oxide nanoparticles by mechanochemical oxidation of copper in high planetary energy ball mill. Adv Powder Technol. 2013;24:301–305.
- Madavali B, Lee JH, Lee JK, et al. Effects of atmosphere and milling time on the coarsening of copper powders during mechanical milling. Powder Technol. 2014;256:251–256.
- Zhang YF, Lu L, Yap SM. Prediction of the amount of PCA for mechanical milling. J Mater Process Technol. 1999;89–90:260–265.
- Yan P, Lin C, Cui S, et al. Microstructural Features and properties of high-hardness and heat-resistant dispersion strengthened copper by reaction milling. J Wuhan Univ Technol-Mater Sci Ed. 2011;26:902–907.
- Prasad YVRK, Rao KP. Influence of oxygen on rate-controlling mechanisms in hot deformation of polycrystalline copper: oxygen-free versus electrolytic grades. Mater Lett. 2004;58:2061–2066.
- Gómez B, Gordo E, Torralba JM. Influence of milling time on the processing of Fe–TiCN Composites. Mater Sci Eng A. 2006;430:59–63.
- Shafeeq M, Gupta GK, Hirshikesh GK, et al. Effect of milling parameters on processing, microstructure and properties of Cu-Al-Ni-Ti shape memory alloys. Powder Metall. 2015;58:265–272.
- http://maud.radiographema.com/
- Rajkovic V, Bozic D, Jovanovic MT. Characterization of prealloyed copper powders treated in high energy ball mill. Mater Charact. 2006;57:94–99.
- Cipolloni G, Pellizzari M, Molinari A, et al. Contamination during the high-energy milling of atomized copper powder and its effects on spark plasma sintering. Powder Technol. 2015;275:51–59.
- Diouf S, Molinari A. Densification mechanisms in spark plasma sintering: Effect of particle size and pressure. Powder Technol. 2012;221:220–227.
- Suryanarayana C. Mechanical alloying and milling. Prog Mater Sci. 2001;46:1–184.
- Raghu T, Sundaresan R, Ramakrishnan P, et al. Synthesis of nanocrystalline copper–tungsten alloys by mechanical alloying. Mater Sci Eng A. 2001;304–306:438–441.
- Besenbach F, Norskow JK. Oxygen chemisorption on metal surfaces: General trends for Cu, Ni and Ag. Prog Surf Sci. 1993;44:5–66.
- Menapace C, Cipolloni G, Hebda M, et al. Spark plasma sintering behaviour of copper powders having different particle sizes and oxygen contents. Powder Technol. 2016;291:170–177.
- Xiao X, Zeng Z, Zhao Z, et al. Flaking behavior and microstructure evolution of nickel and copper powder during mechanical milling in liquid environment. Mater Sci Eng A. 2008;475:166–171.
- Guan R, Hashimoto H, Kuo KH, et al. Electron-Microscopic study of the strcture of metastable oxides formed in the initial stage of copper oxidation. IV. Cu4O-S1 and Cu4O-S2. Acta Crystallogr B Struct Sci. 1987;43:343–346.
- Sheibani S, Ataie A, Heshmati-Manesh S, et al. Structural evolution in nano-crystalline Cu synthesized by high energy ball milling. Mater Lett. 2007;61:3204–3207.
- Sheibani S, Ataie A, Heshmati-Manesh S. Role of process control agent on synthesis and consolidation behavior of nano-crystalline copper produced by mechano-chemical route. J Alloys Compd. 2008;465:78–82.
- Zhang DL. Processing of advanced materials using high-energy mechanical milling. Prog Mater Sci. 2004;49:537–560.
- Marques MT, Livramento V, Correia JB, et al. Study of early stages of Cu-NbC nanocomposite synthesis. J Alloys Compd. 2007;434-435:481–484.
- Khoshkhoo MS, Scudino S, Bednarcik J, et al. Mechanism of nanostructure formation in ball-milled Cu and Cu-3wt%Zn studied by X-ray diffraction line profile analysis. J Alloys Compd. 2014;588:138–143.
- Botcharova E, Heilmaier M, Freudenberger J, et al. Supersaturated solid solution of niobium in copper by mechanical alloying. J Alloys Compd. 2003;351:119–125.
- Chen CL, Huang CL. Milling media and alloying effects on synthesis and characteristics of mechanically alloyed ODS heavy tungsten alloys. Int J Refract Metals Hard Mater. 2014;44:19–26.
- Khitouni M, Daly R, Mhadhbi M, Kolsi A. Structural evolution in nanocrystalline Cu obtained by high-energy mechanical milling: Phases formation of copper oxides. J Alloys Compd. 2009;475:581–586.