Investigations of aging behaviour for aluminium powders during an atmosphere simulation of the LBM process

References

• Kempen K, Thijs L, Van Humbeeck J, et al. Mechanical properties of AlSi10Mg produced by selective laser melting. Phys Procedia. 2012;39:439–446. doi: 10.1016/j.phpro.2012.10.059
   Google Scholar
• Siddique S, Imran M, Wycisk E, et al. Influence of process-induced microstructure and imperfections on mechanical properties of AlSi12 processed by selective laser melting. J Mater Process Technol. 2015;221:205–213. doi: 10.1016/j.jmatprotec.2015.02.023
   Web of Science ®Google Scholar
• Read N, Wang W, Essa K, et al. Selective laser melting of AlSi10Mg alloy: process optimisation and mechanical properties development. Mater Des. 2015;65:417–424. doi: 10.1016/j.matdes.2014.09.044
   Web of Science ®Google Scholar
• Pickens JR. Aluminium powder metallurgy technology for high-strength applications. J Mater Sci. 1981;16(6):1437–1457. doi: 10.1007/BF02396863
   Web of Science ®Google Scholar
• Bauer DM, Ludwig I, Greitemeier D, et al. Additive manufactured aluminum alloys based on different powder grades. Fraunhofer Direct Digital Manufacturing Conference (DDMC); March 2016; Berlin. p. 1–5.
   Google Scholar
• Buchbinder D, Meiners W. Abschlussbericht – Generative Fertigung von Aluminiumbauteilen für die Serienproduktion. Aachen: Fraunhofer ILT; 2010.
   Google Scholar
• Weingarten C, Buchbinder D, Pirch N, et al. Formation and reduction of hydrogen porosity during selective laser melting of AlSi10Mg. J Mater Process Technol. 2015;221:112–120. doi: 10.1016/j.jmatprotec.2015.02.013
   Web of Science ®Google Scholar
• Aboulkhair NT, Everitt NM, Ashcroft I, et al. Reducing porosity in AlSi10Mg parts processed by selective laser melting. Addit Manuf. 2014;1–4:77–86. doi: 10.1016/j.addma.2014.08.001
   Google Scholar
• Brandl E, Heckenberger U, Holzinger V, et al. Additive manufactured AlSi10Mg samples using selective laser melting (SLM): microstructure, high cycle fatigue, and fracture behavior. Mater Des. 2012;34:159–169. doi: 10.1016/j.matdes.2011.07.067
   Web of Science ®Google Scholar
• Kempen K, Thijs L, Yasa E, et al. Process optimization and microstructural analysis for selective laser melting of AlSi10Mg. 22nd Annual International Solid Freeform Fabrication Symposium – An Additive Manufacturing Conference, SFF 2011; 2011; p. 484–495.
   Google Scholar
• Louvis E, Fox P, Sutcliffe CJ. Selective laser melting of aluminium components. J Mater Process Technol. 2011;211(2):275–284. doi: 10.1016/j.jmatprotec.2010.09.019
   Web of Science ®Google Scholar
• Olakanmi EO, Cochrane RF, Dalgarno KW. Densification mechanism and microstructural evolution in selective laser sintering of Al-12Si powders. J Mater Process Technol. 2011;211(1):113–121. doi: 10.1016/j.jmatprotec.2010.09.003
   Web of Science ®Google Scholar
• Olakanmi EO, Cochrane RF, Dalgarno KW. A review on selective laser sintering/melting (SLS/SLM) of aluminium alloy powders: processing, microstructure, and properties. Prog Mater Sci. 2015;74:401–477. doi: 10.1016/j.pmatsci.2015.03.002
   Web of Science ®Google Scholar
• Kumar S. Selective laser sintering/melting. Compr Mater Process. 2014;10:93–134. doi: 10.1016/B978-0-08-096532-1.01003-7
   Google Scholar
• Li XP, O’Donnell KM. Selective laser melting of Al-12Si alloy: enhanced densification via powder drying. Addit Manuf. 2016;10:10–14. doi: 10.1016/j.addma.2016.01.003
   Web of Science ®Google Scholar
• Olakanmi EO. Selective laser sintering/melting (SLS/SLM) of pure Al, Al-Mg, and Al-Si powders: effect of processing conditions and powder properties. J Mater Process Technol. 2013;213(8):1387–1405. doi: 10.1016/j.jmatprotec.2013.03.009
   Web of Science ®Google Scholar
• Schulze G. Die Metallurgie des Schweißens – Eisenwerkstoffe – Nichtmetallische Werkstoffe. 3rd ed. Berlin: Springer; 2004.
   Google Scholar
• Nie H, Zhang S, Schoenitz M, et al. Reaction interface between aluminum and water. Int J Hydrogen Energy. 2013;38(26):11222–11232. doi: 10.1016/j.ijhydene.2013.06.097
   Web of Science ®Google Scholar
• Gai WZ, Liu WH, Deng ZY, et al. Reaction of Al powder with water for hydrogen generation under ambient condition. Int J Hydrogen Energy. 2012;37(17):13132–13140. doi: 10.1016/j.ijhydene.2012.04.025
   Web of Science ®Google Scholar
• Lide DR. Handbook of chemistry and physics. vol. 76th ed. Boca Raton: CrC Press; 1995.
   Google Scholar
• Kammer C. Aluminium Taschenbuch – 1 Grundlagen und Werkstoffe. 16th ed. Düsseldorf: Aluminium-Verlag.
   Google Scholar
• Godard HP. Oxide film growth over five years on some aluminum sheet alloys in air of varying humidity at room temperature. J Electrochem Soc. 1967;114:354–356. doi: 10.1149/1.2426593
   Web of Science ®Google Scholar
• Petrovic J, Thomas G. Reaction of aluminum with water to produce hydrogen. Washington (DC): U.S. Department of Energy; 2008.
   Google Scholar
• Deng ZY, Ferreira JMF, Tanaka Y, et al. Physicochemical mechanism for the continuous reaction of γ-Al 2O3-modified aluminum powder with water. J Am Ceram Soc. 2007;90(5):1521–1526. doi: 10.1111/j.1551-2916.2007.01546.x
   Web of Science ®Google Scholar
• Deutscher Wetterdienst. “www.dwd.de.” [Online] [Cited 2016 Mar 10]. Available from http://www.dwd.de/DE/leistungen/weste/westexl/weste_xl.html;jsessionid=FFE1CBB90EC724A0C52C99D612868E41.live11043?nn=342632
   Google Scholar