References
- Field M, Kahles JF, Cammett JT. A review of measuring methods for surface integrity. CIRP Ann. 1972;21:219–238.
- Jawahir IS, Brinksmeier E, M’Saoubi R, et al. Surface integrity in material removal processes: recent advances. CIRP Ann-Manuf Techn. 2011;60:603–626. doi: 10.1016/j.cirp.2011.05.002
- Prakash L. 1.02 - Fundamentals and general applications of hardmetals. In: Sarin VK, Mari D, Llanes L, editors. Comprehensive hard materials Vol. 1. Oxford: Elsevier; 2014. p. 29–90.
- Takeyama H, Iijima N, Uno K. Surface integrity of cemented carbide tool and its brittle fracture. CIRP Ann-Manuf Techn. 1982;31:59–63. doi: 10.1016/S0007-8506(07)63269-7
- Eigenmann B, Macherauch E. Röntgenographische untersuchung von spannungszuständen in werkstoffen. Materwiss Werksttech. 1996;27:A11–A13. doi: 10.1002/mawe.19960270203
- Exner HE. Physical and chemical nature of cemented carbides. Int Met Rev. 1979;24:149–173. doi: 10.1179/095066079790136363
- Mari D, Krawitz AD, Richardson JW, et al. Residual stress in WC–Co measured by neutron diffraction. Mater Sci Eng A. 1996;209:197–205. doi: 10.1016/0921-5093(95)10147-0
- Larsson C, Odén M. X-ray diffraction determination of residual stresses in functionally graded WC–Co composites. Int J Refract Met Hard Mater. 2004;22:177–184. doi: 10.1016/j.ijrmhm.2004.06.002
- Livescu V, Clausen B, Paggett JW, et al. Measurement and modeling of room temperature co-deformation in WC–10 wt.% Co. Mater Sci Eng A. 2005;399:134–140. doi: 10.1016/j.msea.2005.02.024
- Hegeman JBJW, De Hosson JTM, de With G. Grinding of WC–Co hardmetals. Wear. 2001;248:187–196. doi: 10.1016/S0043-1648(00)00561-5
- Jiang D, Anne G, Vleugels J, et al. Residual stresses in hardmetals caused by grinding and EDM machining and their influence on the flexural strength. 16th International Plansee Conference. Reutte, Austria, 2005. p. 1075–1085.
- Merklein M, Andreas K, Engel U. Influence of machining process on residual stresses in the surface of cemented carbides. Procedia Eng. 2011;19:252–257. doi: 10.1016/j.proeng.2011.11.108
- Denkena B, Breidenstein B. Residual stress distribution in PVD-coated carbide cutting tools: origin of cohesive damage. Tribol Ind. 2012;34:158–165.
- Johnson-Walls D, Evans AG, Marshall DB, et al. Residual stresses in machined ceramic surfaces. J Am Ceram Soc. 1986;69:44–47. doi: 10.1111/j.1151-2916.1986.tb04691.x
- Denkena B, Breidenstein B, Wagner L, et al. Influence of shot peening and laser ablation on residual stress state and phase composition of cemented carbide cutting inserts. Int J Refract Met Hard Mater. 2013;36:85–89. doi: 10.1016/j.ijrmhm.2012.07.005
- Mingard KP, Roebuck B, Marshall J, et al. Some aspects of the structure of cobalt and nickel binder phases in hardmetals. Acta Metall. 2011;59:2277–2290.