483
Views
12
CrossRef citations to date
0
Altmetric
Regular papers

Spark plasma sintering versus hot pressing – densification, bending strength, microstructure, and tribological properties of Ti5Al2.5Fe alloys

, &
Pages 178-186 | Received 22 Aug 2017, Accepted 12 Feb 2018, Published online: 27 Feb 2018

References

  • Lee C, Lu H-H, Wang C-A, et al. Effect of heating rate on spark plasma sintering of a nanosized β-Si3N4-based powder. J Am Ceram Soc. 2011;94(4):1182–1190. doi: 10.1111/j.1551-2916.2010.04196.x
  • Yang Z, Wang H, Min X, et al. Effect of heating rate on microstructure and properties of spark plasma sintered Li-α-sialon. Ceram Int. 2011;37(7):2175–2180. doi: 10.1016/j.ceramint.2011.03.014
  • Yang Q, Tang Y, Wen Y, et al. Microstructures and properties of CoCrCuFeNiMox high-entropy alloys fabricated by mechanical alloying and spark plasma sintering. Powder Metall. 2017:1–8. doi: 10.1080/00325899.2017.1415248
  • Sadeghi B, Shamanian M, Ashrafizadeh F, et al. Microstructural behaviour of spark plasma sintered composites containing bimodal micro- and nano-sized Al2O3 particles. Powder Metall. 2017;61:1–14.
  • Garbiec D, Siwak P, Mróz A. Effect of compaction pressure and heating rate on microstructure and mechanical properties of spark plasma sintered Ti6Al4V alloy. Arch Civil Mech Eng. 2016;16(4):702–707. doi: 10.1016/j.acme.2016.04.009
  • Liu G, Li R, Yuan T, et al. Spark plasma sintering of pure TiCN: densification mechanism, grain growth and mechanical properties. Int J Refract Met Hard Mater. 2017;66:68–75. doi: 10.1016/j.ijrmhm.2017.02.008
  • Kang S-JL. Sintering: densification, grain growth and microstructure. Burlington: Elsevier Butterworth-Heinemann; 2005.
  • German RM. Sintering theory and practice. New York: John Wiley & Sons, Inc.; 1996.
  • Yamanoglu R. In situ aluminum alloy coating on magnesium by hot pressing. Acta Metall Sin (Eng Lett). 2015;28(8):1059–1064. doi: 10.1007/s40195-015-0295-8
  • Yamanoglu R. Production and characterization of Al-xNi in situ composites using hot pressing. J Min Metall B. 2014;50(1):45–52. doi: 10.2298/JMMB130717001Y
  • Ibrahim A, Zhang F, Otterstein E, et al. Processing of porous Ti and Ti5Mn foams by spark plasma sintering. Mater Des. 2011;32(1):146–153. doi: 10.1016/j.matdes.2010.06.019
  • Garay JE. Current-activated, pressure-assisted densification of materials. Annu Rev Mater Res. 2010;40:445–468. doi: 10.1146/annurev-matsci-070909-104433
  • Yamanoglu R, Bradbury W, Karakulak E, et al. Characterisation of nickel alloy powders processed by spark plasma sintering. Powder Metall. 2014;57(5):380–386. doi: 10.1179/1743290114Y.0000000088
  • Antou G, Guyot P, Pradeilles N, et al. Identification of densification mechanisms of pressure-assisted sintering: application to hot pressing and spark plasma sintering of alumina. J Mater Sci. 2015;50(5):2327–2336. doi: 10.1007/s10853-014-8804-0
  • Zhao D, Chang K, Ebel T, et al. Sintering behavior and mechanical properties of a metal injection molded Ti–Nb binary alloy as biomaterial. J Alloys Compd. 2015;640:393–400. doi: 10.1016/j.jallcom.2015.04.039
  • Maya-Johnson S, López D. Effect of the cooling rate in the corrosion behavior of a hot worked Ti-6Al-4V extra-low interstitial alloy. Mater Des. 2014;58:175–181. doi: 10.1016/j.matdes.2014.01.024
  • Fidan S, Avcu E, Karakulak E, et al. Effect of heat treatment on erosive wear behaviour of Ti6Al4V alloy. Mater Sci Tech. 2013;29(9):1088–1094. doi: 10.1179/1743284713Y.0000000239
  • Niemeyer TC, Grandini CR, Pinto LMC, et al. Corrosion behavior of Ti–13Nb–13Zr alloy used as a biomaterial. J Alloys Compd. 2009;476(1):172–175. doi: 10.1016/j.jallcom.2008.09.026
  • Migonney V. “Biomaterials”, bioengineering and health science series. London: Wiley & Sons; 2014.
  • Diouf S, Molinari A. Densification mechanisms in spark plasma sintering: effect of particle size and pressure. Powder Technol. 2012;221:220–227. doi: 10.1016/j.powtec.2012.01.005
  • Yang YF, Qian MA, Spark plasma sintering and hot pressing of titanium and titanium alloys. Titanium powder metallurgy: science, technology and applications. Butterworth-Heinemann; 2015.
  • Lu X, He XB, Zhang B, et al. Microstructure and mechanical properties of a spark plasma sinteredTi–45Al–8.5 Nb–0.2 W–0.2 B–0.1 Y alloy. Intermetallics. 2009;17(10):840–846. doi: 10.1016/j.intermet.2009.03.013
  • Xiao S-L, Tian J, Xu L-J, et al. Microstructures and mechanical properties of TiAl alloy prepared by spark plasma sintering. T Nonferr Metal Soc China. 2009;19(6):1423–1427. doi: 10.1016/S1003-6326(09)60044-3
  • Qian M, Froes FH, editors. Titanium powder metallurgy: science, technology and applications. Waltham, MA: Butterworth-Heinemann, 2015.
  • Bolzoni L, Ruiz-Navas EM, Neubauer E, et al. Mechanical properties and microstructural evolution of vacuum hot-pressed titanium and Ti–6Al–7Nb alloy. J Mech Behav Biomed Mater. 2012;9:91–99. doi: 10.1016/j.jmbbm.2012.01.015
  • Wang S, Ma Z, Liao Z, et al. Study on improved tribological properties by alloying copper to CP-Ti and Ti–6Al–4 V alloy. Adv Mater Sci Eng C. 2015;57:123–132. doi: 10.1016/j.msec.2015.07.046
  • Zhong H, Dai LY, Yue Y, et al. Friction and wear behavior of annealed Ti-20Zr-6.5 Al-4V alloy sliding against 440C steel in vacuum. Tribol Int. 2017;109:571–577. doi: 10.1016/j.triboint.2017.01.040
  • Barry Waterhoure R, Wharton MH. Titanium and tribology. Ind Lubr Tribol. 1974;26(1):20–23. doi: 10.1108/eb053055

Reprints and Corporate Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

To request a reprint or corporate permissions for this article, please click on the relevant link below:

Academic Permissions

Please note: Selecting permissions does not provide access to the full text of the article, please see our help page How do I view content?

Obtain permissions instantly via Rightslink by clicking on the button below:

If you are unable to obtain permissions via Rightslink, please complete and submit this Permissions form. For more information, please visit our Permissions help page.