Effect of process parameters on the microstructure and mechanical properties of vacuum hot-press sintered Co-50 mass% Cr alloys

References

• Castellanos MI, Zenses AS, Grau A, et al. Biofunctionalization of REDV elastin-like recombinamers improves endothelialization on CoCr alloy surfaces for cardiovascular applications. Colloid Surf B Biointerfaces. 2015;127:22–32. doi: 10.1016/j.colsurfb.2014.12.056
   PubMed Web of Science ®Google Scholar
• Dinu M, Cojocaru M, Braic V, et al. Improvement of the tribological performance in corrosive environment of CoCr alloy by TiSiON coatings. Appl Surf Sci. 2015;332:295–299. doi: 10.1016/j.apsusc.2015.01.221
   Web of Science ®Google Scholar
• Lutz J, Mändl S. Effect of ion energy and chemistry on layer growth processes during nitriding of CoCr alloys. Nucl Instrum Methods Phys Res B. 2009;267:1522–1525. doi: 10.1016/j.nimb.2009.01.083
   Web of Science ®Google Scholar
• Lutz J, Díazc C, García JA, et al. Corrosion behaviour of medical CoCr alloy after nitrogen plasma immersion ion implantation. Surf Coat Technol. 2011;205:3043–3049. doi: 10.1016/j.surfcoat.2010.11.017
   Web of Science ®Google Scholar
• García JA, Díaz C, Mändl S, et al. Tribological improvements of plasma immersion implanted CoCr alloys. Surf Coat Technol. 2010;204:2928–2932. doi: 10.1016/j.surfcoat.2010.03.050
   Web of Science ®Google Scholar
• Khatibi G, Lederer M, Kotas AB, et al. High-cycle fatigue behavior of thin-walled CoCr tubes. Int J Fatigue. 2015;80:103–112. doi: 10.1016/j.ijfatigue.2015.05.013
   Web of Science ®Google Scholar
• Galdikas A, Petraitienė A, Moskalioviene T. Internal stress assisted nitrogen diffusion in plasma nitrided medical CoCr alloys. Vacuum. 2015;119:233–238. doi: 10.1016/j.vacuum.2015.05.029
   Web of Science ®Google Scholar
• Kim HR, Kim YK, Son JS, et al. Comparison of in vitro biocompatibility of a Co-Cr dental alloy produced by new milling/post-sintering or traditional casting technique. Mater Lett. 2016;178:300–303. doi: 10.1016/j.matlet.2016.05.053
   Web of Science ®Google Scholar
• Dehaghani MT, Ahmadian M, Fathi M. Effect of ball milling on the physical and mechanical properties of the nanostructured Co-Cr-Mo powders. Adv Powder Technol. 2014;25:1793–1799. doi: 10.1016/j.apt.2014.07.009
   Web of Science ®Google Scholar
• Chang SH, Chang PY. Study on the mechanical properties, microstructure and corrosion behaviors of nano-WC-Co-Ni-Fe hard materials through HIP and hot-press sintering processes. Mater Sci Eng A. 2014;618:56–62. doi: 10.1016/j.msea.2014.08.081
   Web of Science ®Google Scholar
• Betancourt-Cantera JA, Sánchez-De Jesús F, Torres-Villaseñor G, et al. Extended solid solubility of a Co-Cr system by mechanical alloying. J Alloys Compd. 2012;529:58–62. doi: 10.1016/j.jallcom.2012.03.082
   Web of Science ®Google Scholar
• Chang SH, Chang PY. Investigation into the sintered behavior and properties of nanostructured WC-Co-Ni-Fe hard metal alloys. Mater Sci Eng A. 2014;606:150–156. doi: 10.1016/j.msea.2014.03.096
   Web of Science ®Google Scholar
• Chang SH, Li CL, Huang KT. Investigation of vacuum hot-press sintering temperatures on the sintered characteristics of Cr-31.2 mass% Ti alloys. Mater Trans. 2017;58:1190–1196. doi: 10.2320/matertrans.M2017048
   Web of Science ®Google Scholar
• Jia CC, Sun L, Tang H, et al. Hot pressing of nanometer WC-Co powder. Int J Refract Met Hard Mater. 2007;25:53–56. doi: 10.1016/j.ijrmhm.2005.11.003
   Web of Science ®Google Scholar
• Chang SH, Liang C, Huang JR, et al. Cr50Cu50 alloys produced from submicrometre structured powders through hot pressing at different pressures. Powder Metall. 2016;59:142–147. doi: 10.1080/00325899.2015.1132033
   Web of Science ®Google Scholar
• Chang SH, Liao CL, Huang KT, et al. Investigation of the characteristics of submicron-structured powder-fabricated Cr50Ni50 alloys via different Hot-press sintering pressures. Mater Trans. 2016;57:732–737. doi: 10.2320/matertrans.M2015400
   Web of Science ®Google Scholar
• Wang WM, Fu ZY, Wang H, et al. Influence of hot pressing sintering temperature and time on microstructure and mechanical properties of TiB2 ceramics. J Eur Ceram Soc. 2002;22:1045–1049. doi: 10.1016/S0955-2219(01)00424-1
   Web of Science ®Google Scholar
• Baldan A. Review progress in ostwald ripening theories and their applications to nickel-base superalloys part I: ostwald ripening theories. J Mater Sci. 2002;37:2171–2202. doi: 10.1023/A:1015388912729
   Web of Science ®Google Scholar
• Huang KT, Chang SH, Wu MW, et al. Effects of particle size of pre-alloy powders and vacuum sintering temperatures on the microstructure and mechanical properties of 440C stainless steel. ISIJ Int. 2016;56:335–340. doi: 10.2355/isijinternational.ISIJINT-2015-469
   Web of Science ®Google Scholar
• Callister WD, Rethwisch DG. Materials science and engineering. 8th ed. New Jersey: John Wily & Sons, Inc.; 2011. p. 211–218.
   Google Scholar
• Hagihara K, Nakano T, Sasaki K. Anomalous strengthening behavior of Co-Cr-Mo alloy single crystals for biomedical applications. Scri Matr. 2016;123:149–153. doi: 10.1016/j.scriptamat.2016.06.016
   Web of Science ®Google Scholar
• Chang SH, Yeh PT, Huang KT. Microstructures, mechanical properties and corrosion behaviors of NbC added to vanadis 4 tool steel via vacuum sintering and heat treatments. Vacuum. 2017;142:123–130. doi: 10.1016/j.vacuum.2017.05.015
   Web of Science ®Google Scholar
• Huang KT, Chang SH, Hsieh PC. Microstructure, mechanical properties and corrosion behavior of NbC modified AISI 440C stainless steel by vacuum sintering and heat treatments. J Alloys Compd. 2017;712:760–767. doi: 10.1016/j.jallcom.2017.04.125
   Web of Science ®Google Scholar